Hi, we are experiencing problems when crossing the border from Germany to Austria (or more interesting here from Vodafone Germany to ATM). This is most likely the "out-of-call" error i mentioned before. Unfortunately i can not provide a log at this time but we will investigate further. Meaningful logging on an embedded device is a bit painful and we can reproduce this situation once a week at best, so is there anything i should pay special attention to (advanced logging options, checks i should perform when the error occurs, etc.)? Is there reason to expect an improvement with V1.18? One way to get out of this is (if i remember correctly): AT+COPS=0 wait AT+COPS=2 systemctl restart modemmanager systemctl restart networkmanager
Best regards, Ralf Dipl. Ing. Ralf Glaser Entwicklungsleiter IoTmaxx GmbH Bultstrasse 5a 30159 Hannover Tel.: +49 511 936874-29 Fax.: +49 511 936874-33 Sitz der Gesellschaft: Hannover, Amtsgericht Hannover HRB 220223, USt-IdNr.: DE326326282 Geschäftsführer: Christian Lelonek, Bernhard Bleitner Diese E-Mail kann vertrauliche und/oder rechtlich geschützte Informationen enthalten. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail oder von Informationen daraus ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the information contained in the e-mail is strictly forbidden.
