Hi Aleksander and Carsten, Il giorno sab 12 feb 2022 alle ore 01:02 Aleksander Morgado <aleksan...@aleksander.es> ha scritto: > > Hey, > > > > > I'm struggling to connect to a private Vodafone APN using MM and NM. > > > > Modem Telit LE910-EU1 (MBIM) > > ModemManager 1.18.6 > > libmbim 1.18.4 > > libqmi 1.30.2 > > NetworkManager 1.22.10 > > > > My problem is, that the bearer gets connected, but not assigned an IP > > address. > > To make it work, I was told to use PDP context ID 3 instead of 1 for this > > private APN. > > > > Daniele, Carlo, would you know why CID 3 is so important to make this work?
It could be an Intel quirk (not the first one), but to be more precise I would need additional details that I can gather only talking to Telit owner of the support ticket. Carsten, if you are interested to further investigate this please privately send me the ticket number, subject of the case and name of the owner. Regards, Daniele > > Could it be that is the default context for the initial defaut EPS > bearer settings? > Carsten, could you try to setup the APN settings you require with > --3gpp-set-initial-eps-bearer-settings instead? > > E.g. mmcli -m a > --3gpp-set-initial-eps-bearer-settings="apn=apn.vodafone.de,ip-type=ipv4,allowed-auth=pap,user=abc,password=def" > > If that doesn't work, you can always reset them with > --3gpp-set-initial-eps-bearer-settings="" > > > When searching the internet, I've found this older thread about selecting a > > CID. > > https://lists.freedesktop.org/archives/modemmanager-devel/2021-February/008420.html > > > > With MR 179 merged, this feature should be available now. > > Unfortunately, the documentation about 3gpp-profile-management is a little > > bit > > poor and mmcli --help-3gpp-profile-manager leaves me with some questions. > > > > Is the 3gpp-profile-manager 'profile-id' corresponding with the PDP context > > ID (CID) > > which can be set by AT+CGDCONT? > > > > At least that is what we try, yes. We're a bit limited here to what > the actual protocol allows us to do, but IIIRC, whenever possible, the > profile id is equal to the cid in +CGDCONT.I > > > From the merge request discussion, I've noticed, that one cannot specify a > > specific > > profile-id when creating a new profile. > > Do I have to create empty profiles until getting to the profile ID to use? > > > > Yeah, this is a limitation in the generic QMI services I think, which > we inherited in our API. Sierra Wireless has its own QMI service > additions to provide a method that allows creating profiles with a > specific ID, but those are not generic. > > > For instance: > > > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-set="" > > --------------------------- > > 3GPP profile manager | set: profile-id: 1 > > | apn-type: default > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-set="" > > --------------------------- > > 3GPP profile manager | set: profile-id: 2 > > | apn-type: default > > Yes. It's a bit of a hack if you're looking to update a specific CID, > but should work. As long as you want to edit a CID with a low number > :) > > > root@dev:~# mmcli -m 0 > > --3gpp-profile-manager-set="apn=apn.vodafone.de,ip-type=ipv4,allowed-auth=pap,user=abc,password=def" > > error: couldn't set profile: > > 'GDBus.Error:org.freedesktop.libmbim.Error.Core.InvalidMessage: Couldn't > > validate update of profile '3': cannot read string data (6 bytes) (274 < > > 278)' > > > > Oh, that's an error deep in the MBIM protocol. Could be a bug in the > message format, or a malformed response sent by the module (I would > bet on the latter 😀). Can you gather ModemManager *debug* logs while > you run that operation? See > https://modemmanager.org/docs/modemmanager/debugging/ > > > I wonder, what are the correct options to be passed to > > 3gpp-profile-manager-set? > > My first assumption is to use the same options as for create-bearer. > > > > After deleting all profiles, I can use the same settings > > for profile 1 and 2 with success, but for profile 3 it fails. > > > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-delete=3 > > successfully deleted the profile > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-delete=2 > > successfully deleted the profile > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-delete=1 > > successfully deleted the profile > > root@dev:~# mmcli -m 0 > > --3gpp-profile-manager-set="apn=apn.vodafone.de,ip-type=ipv4,allowed-auth=pap,user=abc,password=def" > > --------------------------- > > 3GPP profile manager | set: profile-id: 1 > > | apn: apn.vodafone.de > > | allowed-auth: pap > > | user: abc > > | password: d > > | apn-type: default > > > > Why are the last two characters of the given password "def" not shown? > > I've tried with password='def' (in single quotes), but that doesn't help. > > > > That's the same bug as above. > > > root@dev:~# mmcli -m 0 > > --3gpp-profile-manager-set="apn=apn.vodafone.de,ip-type=ipv4,allowed-auth=pap,user=abc,password=def" > > --------------------------- > > 3GPP profile manager | set: profile-id: 2 > > | apn: apn.vodafone.de > > | allowed-auth: pap > > | user: abc > > | password: d > > | apn-type: default > > root@dev:~# mmcli -m 0 > > --3gpp-profile-manager-set="apn=apn.vodafone.de,ip-type=ipv4,allowed-auth=pap,user=abc,password=def" > > error: couldn't set profile: > > 'GDBus.Error:org.freedesktop.libmbim.Error.Core.InvalidMessage: Couldn't > > validate update of profile '3': cannot read string data (6 bytes) (358 < > > 362)' > > > > Is this a bug? > > > > Yes. > > > I've found, that setting profile ID 3 only succeeds, if only > > "apn=apn.vodafone.de" is given. > > > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-delete=3 > > successfully deleted the profile > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-set="apn=apn.vodafone.de" > > --------------------------- > > 3GPP profile manager | set: profile-id: 3 > > | apn: apn.vodafone.de > > | apn-type: default > > > > > > If I try to give a username, it fails. > > > > root@dev:~# mmcli -m 0 --3gpp-profile-manager-delete=3 > > successfully deleted the profile > > root@dev:~# mmcli -m 0 > > --3gpp-profile-manager-set="apn=apn.vodafone.de,user=abc" > > error: couldn't set profile: > > 'GDBus.Error:org.freedesktop.libmbim.Error.Core.InvalidMessage: Couldn't > > validate update of profile '3': cannot read string data (6 bytes) (352 < > > 354)' > > > > I think this is still the same error as above. > > > If I could manage to set profile-id 3 properly with the requested APN > > settings, do I have to create > > the bearer pointing to the profile-id in this way? > > > > mmcli -m 0 --create-bearer="profile-id=3" > > > > Yes. > > -- > Aleksander > https://aleksander.es
