Hi Amol, Il giorno lun 25 lug 2022 alle ore 07:34 Amol Lad <amol....@4rf.com> ha scritto: > > Hi Daniele, > > > > Can we use latest MM 1.18.10 release to test Telit FN990 (USB 3.1 host > interface) or we should use git main? Is this chip now fully supported in MM? >
I've been testing FN990 through main, never tried with the stable releases. My tests were mainly focused on the PCIe setup, not USB, but I think it's probably usable also with 1.18.10, since I don't remember any relevant patch mandatory for that. I still have to send the MR for adding the port hints, this is something I plan to do in the very next days. Regards, Daniele > > > Thanks > > Amol > > > > > > ________________________________ > The information in this email communication (inclusive of attachments) is > confidential to 4RF Limited and the intended recipient(s). If you are not the > intended recipient(s), please note that any use, disclosure, distribution or > copying of this information or any part thereof is strictly prohibited and > that the author accepts no liability for the consequences of any action taken > on the basis of the information provided. If you have received this email in > error, please notify the sender immediately by return email and then delete > all instances of this email from your system. 4RF Limited will not accept > responsibility for any consequences associated with the use of this email > (including, but not limited to, damages sustained as a result of any viruses > and/or any action or lack of action taken in reliance on it).
