Hey, > > Is there a way to set a default SIM slot? > > I have a OpenWrt device with an eUICC (slot 1) and UICC-slot (slot 2). The > eUICC is always selected as the active slot on boot (but does not work). > Switching the slot generally works, but no connection can be established: > "device not ready". The same device without the eUICC works just fine with > the same settings. > > My guess is that all slots are tried starting at 1 and the first one > responding is selected as the primary. And because the eUICC is in slot 1 it > always wins. Is that true and can i change this behavior? >
MM does not actively select one slot or the other. When the modem boots there is one slot selected as default, and that is the one that MM will end up using. Unfortunately there is no way to predefine which slot should be used on boot, that kind of logic is not usually managed by MM itself - MM will show what you can do, and let you do it. I assume that the openwrt netifd protocol handler could be updated to support this automatic slot selection on boot, I suggest you open a new issue in their github and ask for that there, I'm sure you're not the only one with this issue. -- Aleksander
