Hi, It has nothing to do with perl...
You are running apache as nobody\nobody and trying to read/write something under /home/soni498/AMF/cache/ and /home/AMF On standard linux systems this is not possible unless you have changed the standard permissons on these folders. (And that is not recommended) Best regards Joakim ________________________________________ From: jitendra.s...@accenture.com [jitendra.s...@accenture.com] Sent: Monday, May 13, 2013 3:22 PM To: modperl@perl.apache.org Subject: RE: Perl module not reading/setting PerlSetEnv command on apache start Actually I am new to perl and need some help in fixing this issue. Do I need to change the User to ROOT in conf file then start apache?? Met vriendelijke groet / With kind regards, Jitendra Soni KPN - Application Development Accenture | Bangalore INDIA Mailto : jitendra.s...@accenture.com Mobile : (+91) 99 860 298 97 -----Original Message----- From: André Warnier [mailto:a...@ice-sa.com] Sent: Monday, May 13, 2013 6:47 PM To: mod_perl list Subject: Re: Perl module not reading/setting PerlSetEnv command on apache start jitendra.s...@accenture.com wrote: > I am starting apache with ROOT user and apache is configured with below > User/Group like below. Is this causing any issue? > That is probably the issue indeed. I believe that you can probably figure out the rest by yourself. > # don't use Group #-1 on these systems! > # > User nobody > Group nobody > </IfModule> > </IfModule> > > # > > Met vriendelijke groet / With kind regards, > > Jitendra Soni > KPN - Application Development > Accenture | Bangalore INDIA > Mailto : jitendra.s...@accenture.com > Mobile : (+91) 99 860 298 97 > > > -----Original Message----- > From: André Warnier [mailto:a...@ice-sa.com] > Sent: Monday, May 13, 2013 6:16 PM > To: mod_perl list > Subject: Re: Perl module not reading/setting PerlSetEnv command on > apache start > > The error message says : > > 09/05/13 - 12:05:17 - CacheDirectoryStore not exist. Please set the > variable > CacheDirectoryStore into httpd.conf, (the directory must be writeable) > > > > Are you sure that this directory exists and is writeable (by the user-id > under which Apache runs) ? > > > jitendra.s...@accenture.com wrote: >> Hi Andre, >> >> Because I have set CacheDirectoryStore in my httpd conf file but it's not >> read by AMF51DegreesFilter.pm file while starting apache. >> >> Met vriendelijke groet / With kind regards, >> >> Jitendra Soni >> KPN - Application Development >> Accenture | Bangalore INDIA >> Mailto : jitendra.s...@accenture.com >> Mobile : (+91) 99 860 298 97 >> >> >> -----Original Message----- >> From: André Warnier [mailto:a...@ice-sa.com] >> Sent: Monday, May 13, 2013 5:59 PM >> To: mod_perl list >> Subject: Re: Perl module not reading/setting PerlSetEnv command on >> apache start >> >> Hi. >> >> And what makes you think that this is a mod_perl problem ? >> There is a fairly explicit error message (and support address) below, which >> tends to point to a problem in the add-on module or the configuration. >> >> >> >> jitendra.s...@accenture.com wrote: >>> Gentlemen, >>> >>> I need urgent help from you in fixing issue related to apache mobile filter >>> 3.53. On putting below AMF configuration in apache httpd conf file I am not >>> able to start apache. >>> >>> Below is the AMF configuration I have added in httpd conf: >>> >>> # >>> #Configuration AMF Filter >>> # >>> PerlSetEnv AMFMobileHome /home/AMF >>> #PerlSetEnv AMFProductionMode true >>> PerlSetEnv CacheDirectoryStore /home/soni498/AMF/cache/ >>> PerlTransHandler +Apache2::AMF51DegreesFilter >>> >>> # >>> #Configuration Switcher >>> # >>> >>> PerlSetEnv WildCardRedirect false >>> PerlSetEnv ForceTabletAsFullBrowser false PerlSetEnv FullBrowserUrl >>> http://sz1061.app.gen.local:83 PerlSetEnv MobileVersionUrl >>> http://sz1061.app.gen.local:83/m/ PerlTransHandler >>> +Apache2::AMFSwitcher >>> >>> >>> -------------8<---------- Start Bug Report ------------8<---------- >>> 1. Problem Description: >>> >>> Perl module not reading/setting the PerlSetEnv command, hence not getting >>> CacheDirectoryStore value while stating apache. See error below: >>> (1) While starting below error we are getting # ./apachectl.e.83 -k >>> start >>> 09/05/13 - 12:05:17 - >>> --------------------------------------------------------------------------- >>> 09/05/13 - 12:05:17 - ------- APACHE MOBILE FILTER V3.54 >>> ------- >>> 09/05/13 - 12:05:17 - ------- support >>> http://groups.google.com/group/amf-device-detection ------- >>> 09/05/13 - 12:05:17 - >>> -------------------------------------------------------------------- >>> - >>> ------ >>> 09/05/13 - 12:05:17 - AMF51DegreesFilter module Version 3.54 >>> 09/05/13 - 12:05:17 - AMFCheckVersione is false, AMF don't check the last >>> version. >>> 09/05/13 - 12:05:17 - CacheDirectoryStore not exist. Please set the >>> variable CacheDirectoryStore into httpd.conf, (the directory must be >>> writeable) >>> >>> >>> (2) In apache logs we are getting below error: >>> [Mon May 13 13:16:39 2013] [info] mod_ssl/2.2.20 compiled against >>> Server: Apache/2.2.20, Library: OpenSSL/0.9.8k Mon May 13 13:16:39 >>> 2013] [error] ModPerl::Util::exit: (120000) exit was called at >>> /usr/local/lib/perl5/site_perl/5.14.2/Apache2/AMF51DegreesFilter.pm >>> line 128Compilation failed in require at (eval 2) line 2.\n failed >>> to load Apache2::AMF51DegreesFilter package >>> >>> 2. Used Components and their Configuration: >>> >>> *** mod_perl version 2.000007 >>> >>> *** using /home/soni498/mod_perl-2.0.7/lib/Apache2/BuildConfig.pm >>> >>> *** Makefile.PL options: >>> MP_APR_LIB => aprext >>> MP_APXS => /usr/apache02/httpd_2.2.20/bin/apxs >>> MP_COMPAT_1X => 1 >>> MP_GENERATE_XS => 1 >>> MP_LIBNAME => mod_perl >>> MP_USE_DSO => 1 >>> >>> >>> *** /usr/httpd2.2.20/httpd/bin/httpd -V Server version: >>> Apache/2.2.20 >>> (Unix) >>> Server built: Feb 5 2013 08:10:24 >>> Server's Module Magic Number: 20051115:28 Server loaded: APR 1.4.5, >>> APR-Util 1.3.12 Compiled using: APR 1.4.5, APR-Util 1.3.12 >>> Architecture: 32-bit >>> Server MPM: Prefork >>> threaded: no >>> forked: yes (variable process count) >>> Server compiled with.... >>> -D APACHE_MPM_DIR="server/mpm/prefork" >>> -D APR_HAS_SENDFILE >>> -D APR_HAS_MMAP >>> -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D >>> APR_USE_PROC_PTHREAD_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D >>> SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D >>> AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D >>> HTTPD_ROOT="/usr/httpd2.2.20/httpd" >>> -D SUEXEC_BIN="/usr/httpd2.2.20/httpd/bin/suexec" >>> -D DEFAULT_PIDLOG="logs/httpd.pid" >>> -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" >>> -D DEFAULT_LOCKFILE="logs/accept.lock" >>> -D DEFAULT_ERRORLOG="logs/error_log" >>> -D AP_TYPES_CONFIG_FILE="conf/mime.types" >>> -D SERVER_CONFIG_FILE="conf/httpd.conf" >>> >>> *** /usr/bin/ldd /usr/httpd2.2.20/httpd/bin/httpd >>> libm.so.2 => /lib/libm.so.2 >>> libaprutil-1.so.0 => >>> /usr/httpd2.2.20/httpd/lib/libaprutil-1.so.0 >>> libexpat.so.0 => /usr/httpd2.2.20/httpd/lib/libexpat.so.0 >>> libiconv.so.2 => /usr/local/lib/libiconv.so.2 >>> libapr-1.so.0 => /usr/httpd2.2.20/httpd/lib/libapr-1.so.0 >>> libuuid.so.1 => /lib/libuuid.so.1 >>> libsendfile.so.1 => /lib/libsendfile.so.1 >>> librt.so.1 => /lib/librt.so.1 >>> libsocket.so.1 => /lib/libsocket.so.1 >>> libnsl.so.1 => /lib/libnsl.so.1 >>> libpthread.so.1 => /lib/libpthread.so.1 >>> libc.so.1 => /lib/libc.so.1 >>> libgcc_s.so.1 => /usr/local/lib/libgcc_s.so.1 >>> libaio.so.1 => /lib/libaio.so.1 >>> libmd.so.1 => /lib/libmd.so.1 >>> libmp.so.2 => /lib/libmp.so.2 >>> libscf.so.1 => /lib/libscf.so.1 >>> libdoor.so.1 => /lib/libdoor.so.1 >>> libuutil.so.1 => /lib/libuutil.so.1 >>> libgen.so.1 => /lib/libgen.so.1 >>> /lib/libm/libm_hwcap1.so.2 >>> /platform/SUNW,SPARC-Enterprise/lib/libc_psr.so.1 >>> >>> >>> *** (apr|apu)-config linking info >>> >>> -L/usr/apache02/httpd_2.2.20/lib -laprutil-1 -lexpat -liconv >>> -L/usr/apache02/httpd_2.2.20/lib -lapr-1 -luuid -lsendfile -lrt >>> -lsocket -lnsl -lpthread >>> >>> >>> >>> *** /usr/local/bin/perl -V >>> Summary of my perl5 (revision 5 version 14 subversion 2) configuration: >>> >>> Platform: >>> osname=solaris, osvers=2.10, archname=sun4-solaris-thread-multi >>> uname='sunos sz1061 5.10 generic_147440-19 sun4u sparc >>> sunw,sparc-enterprise ' >>> config_args='-de -Dcc=gcc' >>> hint=previous, useposix=true, d_sigaction=define >>> useithreads=define, usemultiplicity=define >>> useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef >>> use64bitint=undef, use64bitall=undef, uselongdouble=undef >>> usemymalloc=n, bincompat5005=undef >>> Compiler: >>> cc='gcc', ccflags ='-D_REENTRANT -fno-strict-aliasing -pipe >>> -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 >>> -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV', >>> optimize='-O', >>> cppflags='-D_REENTRANT -fno-strict-aliasing -pipe -I/usr/local/include >>> -D_REENTRANT -fno-strict-aliasing -pipe -I/usr/local/include >>> -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV' >>> ccversion='', gccversion='3.4.6', gccosandvers='solaris2.10' >>> intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 >>> d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 >>> ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', >>> lseeksize=8 >>> alignbytes=8, prototype=define >>> Linker and Libraries: >>> ld='gcc', ldflags =' -L/usr/local/lib ' >>> libpth=/usr/local/lib /usr/lib /usr/ccs/lib >>> libs=-lsocket -lnsl -ldl -lm -lpthread -lc >>> perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc >>> libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a >>> gnulibc_version='' >>> Dynamic Linking: >>> dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' >>> cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib' >>> >>> >>> Characteristics of this binary (from libperl): >>> Compile-time options: MULTIPLICITY PERL_DONT_CREATE_GVSV >>> PERL_IMPLICIT_CONTEXT PERL_MALLOC_WRAP >>> PERL_PRESERVE_IVUV PERL_USE_SAFE_PUTENV USE_ITHREADS >>> USE_LARGE_FILES USE_PERLIO USE_PERL_ATOF >>> USE_REENTRANT_API >>> Built under solaris >>> Compiled at Feb 5 2013 10:37:08 >>> %ENV: >>> PERL_LWP_USE_HTTP_10="1" >>> @INC: >>> /usr/local/lib/perl5/site_perl/5.14.2/sun4-solaris-thread-multi >>> /usr/local/lib/perl5/site_perl/5.14.2 >>> /usr/local/lib/perl5/5.14.2/sun4-solaris-thread-multi >>> /usr/local/lib/perl5/5.14.2 >>> . >>> >>> *** Packages of interest status: >>> >>> Apache2 : - >>> Apache2::Request : - >>> CGI : 3.52 >>> ExtUtils::MakeMaker: 6.57_05 >>> LWP : 6.05 >>> mod_perl : - >>> mod_perl2 : 2.000007 >>> >>> >>> 3. This is the core dump trace: (if you get a core dump): >>> >>> [CORE TRACE COMES HERE] >>> >>> This report was generated by t/REPORT on Mon May 13 11:27:44 2013 GMT. >>> >>> -------------8<---------- End Bug Report --------------8<---------- >>> >>> Note: Complete the rest of the details and post this bug report to >>> modperl <at> perl.apache.org. To subscribe to the list send an empty >>> email to modperl-subscr...@perl.apache.org. >>> >>> Met vriendelijke groet / With kind regards, >>> >>> Jitendra Soni >>> KPN - Application Development >>> Accenture | Bangalore INDIA >>> Mailto : jitendra.s...@accenture.com Mobile : (+91) 99 860 298 97 >>> >>> >>> ________________________________ >>> This message is for the designated recipient only and may contain >>> privileged, proprietary, or otherwise confidential information. If you have >>> received it in error, please notify the sender immediately and delete the >>> original. Any other use of the e-mail by you is prohibited. >>> >>> Where allowed by local law, electronic communications with Accenture and >>> its affiliates, including e-mail and instant messaging (including content), >>> may be scanned by our systems for the purposes of information security and >>> assessment of internal compliance with Accenture policy. >>> >>> _____________________________________________________________________ >>> _________________ >>> >>> www.accenture.com >>> >> >> >> > > > >
