Hi Nick,
Thanks for the reply but that did not help.
The patches are applied as far as I can tell, see the script created files
(3) attached where I tried to do a configure with three different orders of
the PATH, but all failed. Additionally the machine is not connecting on
./patcher but I have downloaded all available patches (22) to a local
directory but not sure how to have ./patcher look at that directory.
I have installed MolPro on server other platforms but this MAC is not
working for me.
Please take a look at the attached logs and let me know what I am doing
wrong.
--Bill Gray
----- Original Message -----
From: "Nick Wilson" <[EMAIL PROTECTED]>
To: "Bill Gray" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, November 07, 2003 5:06 AM
Subject: Re: Molpro error on Apple G5 OS 10.3
> Dear Bill,
>
> Kirk Peterson put down a patch recently which I think deals with this
> issue. If you try
>
> make -C utilities patcher
> ./patcher
>
> then hopefully it should download and apply this patch. If you then do
>
> ./configure -i8
>
> you should get the xlf compiler appearing in CONFIG.
>
> Hope this works,
> Best wishes,
> Nick Wilson
>
> Bill Gray wrote:
> >
> > Trying to put Molpro on New machine and need help...
> >
> > Attempting to setup the molpro on an Apple MAC G5, dual 2GHz CPUs, OS
10.3,
> > with IBM's xlf 8.1 installed get error trying to do:
> >
> > ./configure -efc -i8
> > ...
> > linking ftc
> > getopt.c: compiling ... done
> > getopt1.c: compiling ... done
> > molpro.c: compiling ... done
> > linking molpro
> > ftconv.f: compiling ... failed:
> > g77 -fno-second-underscore -fno-globals -w -c -O2 ftconv.f
> > ../bin/ftn: line 1: g77: command not found
> > ln: ./ftconv.exe: No such file or directory
> > gnumake: *** [ftconv.exe] Error 1
> > Setting up integer*8 version; if you want integer*4, use configure -i4
> > xlf: 1501-216 command option -8 is not recognized - passed to ld
> > ** machine === End of Compilation 1 ===
> > ** fehler === End of Compilation 2 ===
> > ** save_all_files === End of Compilation 3 ===
> > 1501-510 Compilation successful for file machine.f.
> > /usr/bin/ld: -i argument: must have a ':' between its symbol names
> > ln: ./machine.exe: No such file or directory
> > gnumake: *** [machine.exe] Error 1
> > ftconv.f: compiling ... failed:
> > g77 -fno-second-underscore -fno-globals -w -c -O2 ftconv.f
> > ../bin/ftn: line 1: g77: command not found
> > ln: ./ftconv.exe: No such file or directory
> > gnumake: *** [ftconv.exe] Error 1
> > ...
> >
> >
> > *** Additional data on system **
> > galaxyg5:~/Documents/MolPro2002.G5/molpro2002.6 wgray$ uname -a
> > Darwin galaxyg5.jics.utk.edu 7.0.0 Darwin Kernel Version 7.0.0: Wed Sep
> > 24 15:48:39 PDT 2003; root:xnu/xnu-517.obj~1/RELEASE_PPC Power
> > Macintosh powerpc
> > galaxyg5:~/Documents/MolPro2002.G5/molpro2002.6 wgray$ cd utilities
> > galaxyg5:~/Documents/MolPro2002.G5/molpro2002.6/utilities wgray$
> > ./config.guess
> > powerpc-apple-darwin7.0.0
> > galaxyg5:~/Documents/MolPro2002.G5/molpro2002.6/utilities wgray$ which
f77
> > /opt/ibmcmp/xlf/8.1/bin/f77
> > galaxyg5:~/Documents/MolPro2002.G5/molpro2002.6/utilities wgray$ which
g77
> > no g77 in /bin /sbin /usr/bin /usr/sbin /opt/ibmcmp/xlf/8.1/bin
> > /opt/ibmcmp/xlf/8.1/bin
> > galaxyg5:~/Documents/MolPro2002.G5/molpro2002.6/utilities wgray$
> > ***********************************
> >
> > ===============================================================
> > William W. Gray ([EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>)
> > Earth & Planetary Sciences Department,
> > University of Tennessee Joint Institute for
> > Computational Science,
> > 206 Geological Sciences and Science Alliance.
> > Knoxville, TN 37996-1410 UT (865) 974-3907
> > Geology (865) 974-6003 ORNL
> > (865) 574-1509
> > http://web.utk.edu/~bill
> > http://www.jics.utk.edu/~gray
> > ==============================================================
> >
>
Script started on Fri Nov 7 10:57:58 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ pwd
/Users/wgray/Documents/molpro2002.6
galaxyg5:~/Documents/molpro2002.6 wgray$ date
Fri Nov 7 10:58:03 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ ls -l
total 136
-rw-r--r-- 1 wgray wgray 11029 2 Oct 2002 GNUmakefile
-rw-r--r-- 1 wgray wgray 0 7 Nov 10:57 MolPro-Configure-Log.txt
-rw-r--r-- 1 wgray wgray 4 4 Nov 00:38 PATCHLEVELS
-rw-r----- 1 wgray wgray 7 21 Feb 2003 VERSION
drwxr-xr-x 25 wgray wgray 850 4 Nov 00:38 bench
drwxr-xr-x 24 wgray wgray 816 7 Nov 08:03 bin
drwxr-xr-x 2 wgray wgray 68 9 Jan 2002 blaslibs
-rwxr-x--- 1 wgray wgray 36774 31 Jul 07:20 configure
-rw-r--r-- 1 wgray wgray 2288 7 Nov 08:03 configure.log
drwxr-xr-x 115 wgray wgray 3910 4 Nov 00:38 lib
drwxr-xr-x 3 wgray wgray 102 4 Nov 00:38 misc
-rw-r--r-- 1 wgray wgray 44 7 Feb 2003 mpptune.com
drwxr-xr-x 30 wgray wgray 1020 4 Nov 00:38 parse
drwxr-xr-x 26 wgray wgray 884 4 Nov 00:38 patch
drwxr-xr-x 44 wgray wgray 1496 4 Nov 00:38 src
drwxr-xr-x 349 wgray wgray 11866 4 Nov 00:38 testjobs
-rw-r--r-- 1 wgray wgray 3290 3 Oct 2002 tuning.com
drwxr-xr-x 50 wgray wgray 1700 7 Nov 08:03 utilities
galaxyg5:~/Documents/molpro2002.6 wgray$ ls -l patch
total 0
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 cidps_orthp
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 configure_xeon
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 darwin_conf
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 dft_orbital_hi
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 enest_dummy
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 fujitsu-ssl2
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 fujitsu_conf
drwxr-xr-x 3 wgray wgray 102 4 Nov 00:38 ga_cleanup
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 ga_conflict2
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 ia64root_check
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 merge_orbdom
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 mkl60
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 modelopt
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 molden_orbital_normalization
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 mpputil
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 mxm_fujitsu
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 nec_parse
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 opteron2
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 patcher_printf
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 posinp
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 pseudo_libmol2
drwxr-xr-x 3 wgray wgray 102 4 Nov 00:38 putxml3
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 readop_multipole_nps
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 sun_forte8
galaxyg5:~/Documents/molpro2002.6 wgray$ ./configure -i8
date
Fri Nov 7 10:59:00 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ uname -a
Darwin galaxyg5.jics.utk.edu 7.0.0 Darwin Kernel Version 7.0.0: Wed Sep 24 15:48:39
PDT 2003; root:xnu/xnu-517.obj~1/RELEASE_PPC Power Macintosh powerpc
galaxyg5:~/Documents/molpro2002.6 wgray$ echo $PATH
/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/opt/ibmcmp/xlf/8.1/bin
galaxyg5:~/Documents/molpro2002.6 wgray$ which g77
/usr/local/bin/g77
galaxyg5:~/Documents/molpro2002.6 wgray$ which f77
/opt/ibmcmp/xlf/8.1/bin/f77
galaxyg5:~/Documents/molpro2002.6 wgray$ which gcc
/usr/bin/gcc
galaxyg5:~/Documents/molpro2002.6 wgray$ ./configure -i8
getmachine was unable to identify your operating system correctly.
Using xlf compiler
** machine === End of Compilation 1 ===
** fehler === End of Compilation 2 ===
** save_all_files === End of Compilation 3 ===
1501-510 Compilation successful for file machine.f.
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
gnumake: *** [echo] Error 1
Setting up integer*8 version; if you want integer*4, use configure -i4
xlf: 1501-216 command option -8 is not recognized - passed to ld
** machine === End of Compilation 1 ===
** fehler === End of Compilation 2 ===
** save_all_files === End of Compilation 3 ===
1501-510 Compilation successful for file machine.f.
/usr/bin/ld: -i argument: must have a ':' between its symbol names
ln: ./machine.exe: No such file or directory
gnumake: *** [machine.exe] Error 1
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
gnumake: *** [echo] Error 1
./configure: line 1: utilities/machine.exe: No such file or directory
ARCHNAME=
BASH=/bin/sh
BASH_VERSINFO=([0]="2" [1]="05b" [2]="0" [3]="1" [4]="release"
[5]="powerpc-apple-darwin7.0")
BASH_VERSION='2.05b.0(1)-release'
BLASLIB=-lblas
BLASLIB_athlon=
BLASLIB_p3=
BLASLIB_p4=
CFLAGS='-DI64 '
DIRSTACK=()
EUID=501
FFLAGS='-i8 -qextname'
GROUPS=()
HOME=/Users/wgray
HOSTNAME=galaxyg5.jics.utk.edu
HOSTTYPE=powerpc
IFS='
'
IRIX64=0
LOGNAME=wgray
MACHTYPE=powerpc-apple-darwin7.0
MAIL=/var/mail/wgray
MAKE=gnumake
MAKES='gnumake GNUmake gmake make'
OPTERR=1
OPTIND=1
OSTYPE=darwin7.0
PATH=/Users/wgray/Documents/molpro2002.6/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/opt/ibmcmp/xlf/8.1/bin
PIPESTATUS=([0]="0")
POSIXLY_CORRECT=y
PPID=14811
PS4='+ '
PWD=/Users/wgray/Documents/molpro2002.6
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=3
SSH_CLIENT='160.36.141.59 2339 22'
SSH_CONNECTION='160.36.141.59 2339 160.36.8.83 22'
SSH_TTY=/dev/ttyp0
TERM=vt100
UID=501
UN='Power Macintosh'
USER=wgray
_=utilities/machine.exe
args=
batch=0
bin=/Users/wgray/Documents/molpro2002.6/bin
cdef=' '
cdefback=' '
compflev=
date='Fri Nov 7 10:59:41 EST 2003'
ftcflags=
host=galaxyg5.jics.utk.edu
integer8=1
key=
largefiles=1
largefilesgiven=0
lib=/Users/wgray/Documents/molpro2002.6/lib
libdir=
m=gnumake
machine=
makemacros='FC=xlf CC=cc'
mpp=0
mppdir=
mppgiven=0
mppx=0
nblas=0
proc=' '
version=2002.6
wrapper=
If you believe the error is not your fault,
please email [EMAIL PROTECTED] with this error, specifying operating
system type and version, compiler type and version and any other
information which would be useful. Exiting ...
galaxyg5:~/Documents/molpro2002.6 wgray$ exit
exit
Script done on Fri Nov 7 10:59:49 2003
Script started on Fri Nov 7 11:13:19 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ echo $PATH
/opt/ibmcmp/xlf8.1/bin:/bin:/sbin:/usr/bin:/opt/ibmcmp/xlf/8.1/bin
galaxyg5:~/Documents/molpro2002.6 wgray$ which f77
/opt/ibmcmp/xlf/8.1/bin/f77
galaxyg5:~/Documents/molpro2002.6 wgray$ which cc
/usr/bin/cc
galaxyg5:~/Documents/molpro2002.6 wgray$ which CC
/usr/bin/CC
galaxyg5:~/Documents/molpro2002.6 wgray$ which g make
/usr/bin/make
galaxyg5:~/Documents/molpro2002.6 wgray$ pwd
/Users/wgray/Documents/molpro2002.6
galaxyg5:~/Documents/molpro2002.6 wgray$ date
Fri Nov 7 11:13:50 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ ./configure -
mak make -C utilites patcher
make: *** utilites: No such file or directory. Stop.
galaxyg5:~/Documents/molpro2002.6 wgray$ make -C utilities patcher
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
make: *** [getopt.o] Error 1
galaxyg5:~/Documents/molpro2002.6 wgray$ make -C utilities patcher.bootstrap
galaxyg5:~/Documents/molpro2002.6 wgray$ ./ ls -l patcher
-rwxr-xr-x 3 wgray wgray 55096 7 Nov 11:15 patcher
galaxyg5:~/Documents/molpro2002.6 wgray$ ./patcher
Fetching http://www.molpro.net/patch/2002.6/contents.html ... FAILED
warning: cannot get list of patches from http://www.molpro.net
Continuing in local mode
Examining installed patches ... OK (22)
Examining available patches ... OK (0)
0 available patches, of which 0 are not currently installed
galaxyg5:~/Documents/molpro2002.6 wgray$ ./patcher -ll -list
Fetching http://www.molpro.net/patch/2002.6/contents.html ... FAILED
warning: cannot get list of patches from http://www.molpro.net
Continuing in local mode
Examining installed patches ... OK (22)
The following patches are installed: readop_multipole_nps darwin_conf pseudo_libmol2
cidps_orthp merge_orbdom sun_forte8 ga_conflict2 opteron2 ia64root_check mkl60
configure_xeon posinp mpputil fujitsu-ssl2 modelopt patcher_printf
molden_orbital_normalization dft_orbital_hi enest_dummy mxm_fujitsu fujitsu_conf
nec_parse
Examining available patches ... OK (0)
0 available patches, of which 0 are not currently installed
galaxyg5:~/Documents/molpro2002.6 wgray$ ./configure -i8
getmachine was unable to identify your operating system correctly.
Using xlf compiler
** machine === End of Compilation 1 ===
** fehler === End of Compilation 2 ===
** save_all_files === End of Compilation 3 ===
1501-510 Compilation successful for file machine.f.
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
gnumake: *** [echo] Error 1
Setting up integer*8 version; if you want integer*4, use configure -i4
xlf: 1501-216 command option -8 is not recognized - passed to ld
** machine === End of Compilation 1 ===
** fehler === End of Compilation 2 ===
** save_all_files === End of Compilation 3 ===
1501-510 Compilation successful for file machine.f.
/usr/bin/ld: -i argument: must have a ':' between its symbol names
ln: ./machine.exe: No such file or directory
gnumake: *** [machine.exe] Error 1
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
gnumake: *** [echo] Error 1
./configure: line 1: utilities/machine.exe: No such file or directory
ARCHNAME=
BASH=/bin/sh
BASH_VERSINFO=([0]="2" [1]="05b" [2]="0" [3]="1" [4]="release"
[5]="powerpc-apple-darwin7.0")
BASH_VERSION='2.05b.0(1)-release'
BLASLIB=-lblas
BLASLIB_athlon=
BLASLIB_p3=
BLASLIB_p4=
CFLAGS='-DI64 '
DIRSTACK=()
EUID=501
FFLAGS='-i8 -qextname'
GROUPS=()
HOME=/Users/wgray
HOSTNAME=galaxyg5.jics.utk.edu
HOSTTYPE=powerpc
IFS='
'
IRIX64=0
LOGNAME=wgray
MACHTYPE=powerpc-apple-darwin7.0
MAIL=/var/mail/wgray
MAKE=gnumake
MAKES='gnumake GNUmake gmake make'
OPTERR=1
OPTIND=1
OSTYPE=darwin7.0
PATH=/Users/wgray/Documents/molpro2002.6/bin:/opt/ibmcmp/xlf8.1/bin:/bin:/sbin:/usr/bin:/opt/ibmcmp/xlf/8.1/bin
PIPESTATUS=([0]="0")
POSIXLY_CORRECT=y
PPID=15075
PS4='+ '
PWD=/Users/wgray/Documents/molpro2002.6
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=3
SSH_CLIENT='160.36.141.59 2339 22'
SSH_CONNECTION='160.36.141.59 2339 160.36.8.83 22'
SSH_TTY=/dev/ttyp0
TERM=vt100
UID=501
UN='Power Macintosh'
USER=wgray
_=utilities/machine.exe
args=
batch=0
bin=/Users/wgray/Documents/molpro2002.6/bin
cdef=' '
cdefback=' '
compflev=
date='Fri Nov 7 11:16:50 EST 2003'
ftcflags=
host=galaxyg5.jics.utk.edu
integer8=1
key=
largefiles=1
largefilesgiven=0
lib=/Users/wgray/Documents/molpro2002.6/lib
libdir=
m=gnumake
machine=
makemacros='FC=xlf CC=cc'
mpp=0
mppdir=
mppgiven=0
mppx=0
nblas=0
proc=' '
version=2002.6
wrapper=
If you believe the error is not your fault,
please email [EMAIL PROTECTED] with this error, specifying operating
system type and version, compiler type and version and any other
information which would be useful. Exiting ...
galaxyg5:~/Documents/molpro2002.6 wgray$ date
Fri Nov 7 11:16:55 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ exit
exit
Script done on Fri Nov 7 11:16:58 2003
Script started on Fri Nov 7 11:18:11 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ echo $PATH
/usr/local/bin:/bin:/sbin:/usr/bin:/usr/sbin:/opt/ibmcmp/xlf/8.1/bin
galaxyg5:~/Documents/molpro2002.6 wgray$ uname -a
Darwin galaxyg5.jics.utk.edu 7.0.0 Darwin Kernel Version 7.0.0: Wed Sep 24 15:48:39
PDT 2003; root:xnu/xnu-517.obj~1/RELEASE_PPC Power Macintosh powerpc
galaxyg5:~/Documents/molpro2002.6 wgray$ which gcc
/usr/local/bin/gcc
galaxyg5:~/Documents/molpro2002.6 wgray$ which f77
/opt/ibmcmp/xlf/8.1/bin/f77
galaxyg5:~/Documents/molpro2002.6 wgray$ which g77
/usr/local/bin/g77
galaxyg5:~/Documents/molpro2002.6 wgray$ ./patcher --list
Fetching http://www.molpro.net/patch/2002.6/contents.html ... FAILED
warning: cannot get list of patches from http://www.molpro.net
Continuing in local mode
Examining installed patches ... OK (22)
The following patches are installed: readop_multipole_nps darwin_conf pseudo_libmol2
cidps_orthp merge_orbdom sun_forte8 ga_conflict2 opteron2 ia64root_check mkl60
configure_xeon posinp mpputil fujitsu-ssl2 modelopt patcher_printf
molden_orbital_normalization dft_orbital_hi enest_dummy mxm_fujitsu fujitsu_conf
nec_parse
Examining available patches ... OK (0)
0 available patches, of which 0 are not currently installed
galaxyg5:~/Documents/molpro2002.6 wgray$ date
Fri Nov 7 11:19:47 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ ./configure -i8
getmachine was unable to identify your operating system correctly.
Using xlf compiler
** machine === End of Compilation 1 ===
** fehler === End of Compilation 2 ===
** save_all_files === End of Compilation 3 ===
1501-510 Compilation successful for file machine.f.
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
gnumake: *** [echo] Error 1
Setting up integer*8 version; if you want integer*4, use configure -i4
xlf: 1501-216 command option -8 is not recognized - passed to ld
** machine === End of Compilation 1 ===
** fehler === End of Compilation 2 ===
** save_all_files === End of Compilation 3 ===
1501-510 Compilation successful for file machine.f.
/usr/bin/ld: -i argument: must have a ':' between its symbol names
ln: ./machine.exe: No such file or directory
gnumake: *** [machine.exe] Error 1
/bin/sh: line 1: ../CONFIG_FRONT: No such file or directory
gnumake: *** [echo] Error 1
./configure: line 1: utilities/machine.exe: No such file or directory
ARCHNAME=
BASH=/bin/sh
BASH_VERSINFO=([0]="2" [1]="05b" [2]="0" [3]="1" [4]="release"
[5]="powerpc-apple-darwin7.0")
BASH_VERSION='2.05b.0(1)-release'
BLASLIB=-lblas
BLASLIB_athlon=
BLASLIB_p3=
BLASLIB_p4=
CFLAGS='-DI64 '
DIRSTACK=()
EUID=501
FFLAGS='-i8 -qextname'
GROUPS=()
HOME=/Users/wgray
HOSTNAME=galaxyg5.jics.utk.edu
HOSTTYPE=powerpc
IFS='
'
IRIX64=0
LOGNAME=wgray
MACHTYPE=powerpc-apple-darwin7.0
MAIL=/var/mail/wgray
MAKE=gnumake
MAKES='gnumake GNUmake gmake make'
OPTERR=1
OPTIND=1
OSTYPE=darwin7.0
PATH=/Users/wgray/Documents/molpro2002.6/bin:/usr/local/bin:/bin:/sbin:/usr/bin:/usr/sbin:/opt/ibmcmp/xlf/8.1/bin
PIPESTATUS=([0]="0")
POSIXLY_CORRECT=y
PPID=15241
PS4='+ '
PWD=/Users/wgray/Documents/molpro2002.6
SHELL=/bin/bash
SHELLOPTS=braceexpand:hashall:interactive-comments:posix
SHLVL=3
SSH_CLIENT='160.36.141.59 2339 22'
SSH_CONNECTION='160.36.141.59 2339 160.36.8.83 22'
SSH_TTY=/dev/ttyp0
TERM=vt100
UID=501
UN='Power Macintosh'
USER=wgray
_=utilities/machine.exe
args=
batch=0
bin=/Users/wgray/Documents/molpro2002.6/bin
cdef=' '
cdefback=' '
compflev=
date='Fri Nov 7 11:19:55 EST 2003'
ftcflags=
host=galaxyg5.jics.utk.edu
integer8=1
key=
largefiles=1
largefilesgiven=0
lib=/Users/wgray/Documents/molpro2002.6/lib
libdir=
m=gnumake
machine=
makemacros='FC=xlf CC=cc'
mpp=0
mppdir=
mppgiven=0
mppx=0
nblas=0
proc=' '
version=2002.6
wrapper=
If you believe the error is not your fault,
please email [EMAIL PROTECTED] with this error, specifying operating
system type and version, compiler type and version and any other
information which would be useful. Exiting ...
galaxyg5:~/Documents/molpro2002.6 wgray$ date
Fri Nov 7 11:20:05 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ ls -l
total 296
-rw-r--r-- 1 wgray wgray 11029 2 Oct 2002 GNUmakefile
-rw-r--r-- 1 wgray wgray 5107 7 Nov 11:16 MolPro-Configure-Log-01.txt
-rw-r--r-- 1 wgray wgray 1322 7 Nov 11:19 MolPro-Configure-Log-02.txt
-rw-r--r-- 1 wgray wgray 6322 7 Nov 10:59 MolPro-Configure-Log.txt
-rw-r--r-- 1 wgray wgray 4 4 Nov 00:38 PATCHLEVELS
-rw-r----- 1 wgray wgray 7 21 Feb 2003 VERSION
drwxr-xr-x 25 wgray wgray 850 4 Nov 00:38 bench
drwxr-xr-x 25 wgray wgray 850 7 Nov 11:19 bin
drwxr-xr-x 2 wgray wgray 68 9 Jan 2002 blaslibs
-rwxr-x--- 1 wgray wgray 36774 31 Jul 07:20 configure
-rw-r--r-- 1 wgray wgray 2285 7 Nov 11:19 configure.log
drwxr-xr-x 115 wgray wgray 3910 4 Nov 00:38 lib
drwxr-xr-x 3 wgray wgray 102 4 Nov 00:38 misc
-rw-r--r-- 1 wgray wgray 44 7 Feb 2003 mpptune.com
drwxr-xr-x 30 wgray wgray 1020 4 Nov 00:38 parse
drwxr-xr-x 26 wgray wgray 884 4 Nov 00:38 patch
-rwxr-xr-x 3 wgray wgray 55096 7 Nov 11:15 patcher
-rw-r--r-- 1 wgray wgray 43 7 Nov 11:19 patcher.log
drwxr-xr-x 44 wgray wgray 1496 4 Nov 00:38 src
drwxr-xr-x 349 wgray wgray 11866 4 Nov 00:38 testjobs
-rw-r--r-- 1 wgray wgray 3290 3 Oct 2002 tuning.com
drwxr-xr-x 57 wgray wgray 1938 7 Nov 11:19 utilities
galaxyg5:~/Documents/molpro2002.6 wgray$ ls -l patch
total 0
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 cidps_orthp
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 configure_xeon
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 darwin_conf
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 dft_orbital_hi
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 enest_dummy
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 fujitsu-ssl2
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 fujitsu_conf
drwxr-xr-x 3 wgray wgray 102 4 Nov 00:38 ga_cleanup
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 ga_conflict2
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 ia64root_check
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 merge_orbdom
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 mkl60
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 modelopt
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 molden_orbital_normalization
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 mpputil
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 mxm_fujitsu
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 nec_parse
drwxr-xr-x 8 wgray wgray 272 4 Nov 00:38 opteron2
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 patcher_printf
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 posinp
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 pseudo_libmol2
drwxr-xr-x 3 wgray wgray 102 4 Nov 00:38 putxml3
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 readop_multipole_nps
drwxr-xr-x 7 wgray wgray 238 4 Nov 00:38 sun_forte8
galaxyg5:~/Documents/molpro2002.6 wgray$ ls utilities
GNUmakefile fortsplit.f getopt1.log machine.o
patcher.c
alloca.c ftc.c getopt1.o machines.h
patcher.log
arscan.c ftconv.f hal.conf macommon.h
patcher.o
cnvrt.f fujitsu.conf hp.conf makedepend.c
rdabsf.c
common get_parse hp.conf_f77 matypes.h
read_ahlrichs_basen.f
comsplit.f getmachine ibm.conf maxdim.f
readpun.f
config.guess getopt.c libmol.c mctype.c
sgi.conf
cray.conf getopt.h libscan.c molcas_split.f
sun.conf
darwin.conf getopt.log linux.conf molpro.c
timing_molpro.c
dec.conf getopt.o macdecls.h nec.conf
tuning.f
echo.c getopt1.c machine.f patcher
unix.c
galaxyg5:~/Documents/molpro2002.6 wgray$ ./utilities/g config.guess
powerpc-apple-darwin7.0.0
galaxyg5:~/Documents/molpro2002.6 wgray$ date
Fri Nov 7 11:20:57 EST 2003
galaxyg5:~/Documents/molpro2002.6 wgray$ exit
exit
Script done on Fri Nov 7 11:21:02 2003
