Hi,
I have a problem with a self written alert.
This script must change two routing tables, exec a ssh command and write
ta text to a log file. It does everything execept the ssh command.
If i run the alert manualy all work perfectly. this script is crutial in
our failover setup.
Here are my configs
/etc/mon/mon.cf
alertdir = /usr/lib/mon/alert.d
mondir = /usr/lib/mon/mon.d
logdir = /var/log/mon.d
statedir = /var/lib/mon.d
maxprocs = 20
histlength = 100
randstart = 60s
hostgroup router 10.32.0.210
hostgroup 100mbit 10.32.100.2
watch router
service ping
interval 5s
monitor ping.monitor
period wd {Mon-Sun}
alert bring-ha-down.alert
alertevery 10s
upalert bring-ha-up.alert
alertevery 10s
watch 100mbit
service ping
interval 5s
monitor ping.monitor
period wd {Mon-Sun}
alert use-framerelay.alert
upalert use-100mbit.alert
The alerts
/usr/lib/mon/alert.d/use-framerelay.alert
#!/bin/ksh
# change the local routing tables to framerelay
/etc/openvpn/route-scripts/up-bxl-ucc-falconstore-framerelay.sh
/etc/openvpn/route-scripts/up-bxl-ucc-data-framerelay.sh
# Change route at UCC to framerelay
ssh [EMAIL PROTECTED] /usr/lib/mon/alert.d/use-framerelay.alert
echo " Failover to Framerelay active on: " `date` >> /var/log/failover.log
The log file
/var/log/failover.log
Failover to Framerelay active on: Sat Nov 26 14:57:15 CET 2005
Failover switch back to 100Mbit on: Sat Nov 26 14:57:44 CET 2005
I hope that someone can help me.
TIA
_______________________________________________
mon mailing list
mon@linux.kernel.org
http://linux.kernel.org/mailman/listinfo/mon
