Hey,

When I try to install monetdb (either using the monetdb-install.sh 
script or the configure/make/make install mechanism in each directory) I 
get the following error for the MonetDB4-XQuery module:

----- this error occurs at the beginning of the 'make', caused by 
automake ----
Can't load '/amd64/usr/lib/perl/5.8/auto/Data/Dumper/Dumper.so' for 
module Data::Dumper: /amd64/usr/lib/perl/5.8/auto/Data/Dumper/Dumper.so: 
cannot open shared object file: No such file or directory at 
/amd64/usr/lib/perl/5.8/XSLoader.pm line 68.
  at /amd64/usr/lib/perl/5.8/Data/Dumper.pm line 27
Compilation failed in require at /usr/share/autoconf/Autom4te/C4che.pm 
line 35.
BEGIN failed--compilation aborted at 
/usr/share/autoconf/Autom4te/C4che.pm line 35.
Compilation failed in require at /usr/bin/autom4te line 39.
BEGIN failed--compilation aborted at /usr/bin/autom4te line 39.
----------------

Note that the /amd64/usr/lib/perl/5.8/* files all exist in the places 
named above! Still, it generates the "No such file or directory".

---------------------------------
Line 68 (and surroundings) of XSLoader.pm reads as:

     # Many dynamic extension loading problems will appear to come from
     # this section of code: XYZ failed at line 123 of DynaLoader.pm.
     # Often these errors are actually occurring in the initialisation
     # C code of the extension XS file. Perl reports the error as being
     # in this perl code simply because this was the last perl code
     # it executed.

     my $libref = dl_load_file($file, 0) or do {
        require Carp;
        Carp::croak("Can't load '$file' for module $module: " . dl_error());
     };
     push(@dl_librefs,$libref);  # record loaded object

---------------------------------

---------------------------------
Line 27 of Dumper.pm reads as:
XSLoader::load 'Data::Dumper';
---------------------------------

The error above I also get when I simply type "automake".

I currently suspect some 32 bit vs. 64 bit problem, as the machine I'm 
compiling things on (2x Dual-Core AMD Opteron Processor 2220 SE) can run 
in either 32 or 64 bit mode. uname outputs:
"2.6.16.29.2.amd64-smp"

Any (other) ideas? Should I post some other debug information? The 
output of "configure" is posted below.

The other packages of (Monet DB Common etc.) run through smoothly.

THANKS!

Ingmar


------------- output of "configure" for MonetDB4-XQuery/pathfinder -----
[EMAIL 
PROTECTED]:/scratch/KM/ir-scratch/ingmar/MonetDB-SuperBall/MonetDB-Venus-SuperBall-SR1/MonetDB4-XQuery/pathfinder
 
[10083] ./configure 
--prefix='/scratch/KM/ir-scratch/ingmar/MonetDB-SuperBall/installation/' 
--enable-optimize --disable-debug --with-libxml2=/amd64/usr
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /amd64/usr/bin//install -c
checking whether build environment is sane... yes
checking for gawk... /usr/bin/gawk
checking whether make sets $(MAKE)... yes
checking for monetdb-config... 
/scratch/KM/ir-scratch/ingmar/MonetDB-SuperBall/installation/bin/monetdb-config
checking whether MonetDB Common version 1.16.2 or newer is installed... 
yes: found version 1.16.2
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking dependency style of gcc... none
checking for egrep... grep -E
checking for ANSI C header files... no
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking how to run the C preprocessor... gcc -E
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ANSI C... (cached) none needed
checking dependency style of gcc... (cached) none
checking for long... yes
checking size of long... 8
checking whether byte ordering is bigendian... no
checking which Linux distribution we're using... Debian3.1
checking if your compiler is C99 compliant... yes
checking for ant... no
checking for java... no
checking for javac... no
checking for jar... no
checking for javadoc... no
checking for monetdb4-config... 
/scratch/KM/ir-scratch/ingmar/MonetDB-SuperBall/installation/bin/monetdb4-config
checking whether MonetDB4 version 4.16.2 or newer is installed... yes: 
found version 4.16.2
checking for monetdb-clients-config... 
/scratch/KM/ir-scratch/ingmar/MonetDB-SuperBall/installation/bin/monetdb-clients-config
checking whether MonetDB Clients version 1.16.2 or newer is installed... 
yes: found version 1.16.2
checking for a sed that does not truncate output... /amd64/bin//sed
checking for  option to reload object files... -r
checking for BSD-compatible nm... /amd64/usr/bin//nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... none
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking for flex... no
checking for lex... no
checking for yywrap in -lfl... no
checking for yywrap in -ll... no
checking for a BSD-compatible install... /amd64/usr/bin//install -c
checking for ld used by gcc... ld -IPA -m elf_x86_64
checking if the linker (ld -IPA -m elf_x86_64) is GNU ld... yes
checking the maximum length of command line arguments... 32768
checking command to parse /amd64/usr/bin//nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (ld -IPA -m elf_x86_64) supports shared 
libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... ld -IPA -m elf_x86_64
checking if the linker (ld -IPA -m elf_x86_64) is GNU ld... yes
checking whether the g++ linker (ld -IPA -m elf_x86_64) supports shared 
libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (ld -IPA -m elf_x86_64) supports shared 
libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) no
checking whether time.h and sys/time.h may both be included... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking alloca.h usability... yes
checking alloca.h presence... yes
checking for alloca.h... yes
checking getopt.h usability... yes
checking getopt.h presence... yes
checking for getopt.h... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking for sys/types.h... (cached) yes
checking for special C compiler options needed for large files... no
checking for _FILE_OFFSET_BITS value needed for large files... no
checking for _LARGE_FILES value needed for large files... no
checking for an ANSI C-conforming const... yes
checking for size_t... yes
checking return type of signal handlers... void
checking for ptrdiff_t... yes
checking for ssize_t... yes
checking for __int64... no
checking for long long... yes
checking for char... yes
checking size of char... 1
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for long... (cached) yes
checking size of long... (cached) 8
checking for void *... yes
checking size of void *... 8
checking for size_t... (cached) yes
checking size of size_t... 8
checking for ssize_t... (cached) yes
checking size of ssize_t... 8
checking for ptrdiff_t... (cached) yes
checking size of ptrdiff_t... 8
checking for long long... (cached) yes
checking size of long long... 8
checking for __int64... (cached) no
checking size of __int64... 0
checking for ftruncate... yes
checking for gettimeofday... yes
checking for opendir... yes
checking whether ln -s works... yes
checking for rm... rm -f
checking for mv... mv -f
checking for lockfile... echo
checking for bash... /bin/sh
checking for rpmbuild... no
checking for rpm... no
checking for an ANSI C-conforming const... (cached) yes
checking for inline... inline
checking for python... no
checking for perl... /amd64/usr/bin//perl
checking for objc... no
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking semaphore.h usability... yes
checking semaphore.h presence... yes
checking for semaphore.h... yes
checking sched.h usability... yes
checking sched.h presence... yes
checking for sched.h... yes
checking for sem_init in -lpthreadGC2... no
checking for sem_init in -lpthreadGC1... no
checking for sem_init in -lpthreadGC... no
checking for sem_init in -lpthread... yes
checking for pthread_sigmask in -lpthread... yes
checking for pthread_kill_other_threads_np in -lpthread... no
checking readline/readline.h usability... yes
checking readline/readline.h presence... yes
checking for readline/readline.h... yes
checking for readline in -lreadline... yes
checking for rl_completion_matches in -lreadline... yes
checking for SSL_read in -lssl... no
checking for ERR_get_error in -lcrypto... no
checking for dlopen in -ldl... yes
checking for malloc in -lmalloc... no
checking for mallopt... yes
checking for mallinfo... yes
checking for gethostbyname_r... yes
checking for setsockopt... yes
checking for SOCKET... no
checking for socklen_t... yes
checking for libz... auto
checking for libbz2... auto
checking for getopt_long... yes
checking libperfctr.h usability... no
checking libperfctr.h presence... no
checking for libperfctr.h... no
checking libpperf.h usability... no
checking libpperf.h presence... no
checking for libpperf.h... no
checking pcl.h usability... no
checking pcl.h presence... no
checking for pcl.h... no
checking for pcre-config... no
pcre-config not found; please use --with-pcre=<path>
checking for pcre >= 4.5... no (without pcre-config to query the pcre 
version, we assume it's < 4.5)
checking regex.h usability... yes
checking regex.h presence... yes
checking for regex.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking langinfo.h usability... yes
checking langinfo.h presence... yes
checking for langinfo.h... yes
checking for nl_langinfo... yes
checking for setlocale... yes
checking iconv.h usability... yes
checking iconv.h presence... yes
checking for iconv.h... yes
checking for iconv_t... yes
checking for iconv in -liconv... no
checking for libiconv in -liconv... no
checking for iconv... yes
checking for texi2html... no
checking for latex2html... no
checking for latex... no
checking for pdflatex... no
checking for dvips... no
checking for fig2dev... no
checking  postscript option... eps
checking /amd64/usr/bin//install -c --backup option... --backup=nil
checking for php-config... no
Cannot find php-config. Please use --with-php-config=PATH
no
checking for monetdb5-config... no
checking whether gcc and cc understand -c and -o together... yes
checking for unistd.h... (cached) yes
checking for getopt.h... (cached) yes
checking for getopt_long... (cached) yes
checking stdbool.h usability... yes
checking stdbool.h presence... yes
checking for stdbool.h... yes
checking for bool... no
checking for stdint.h... (cached) yes
checking for socklen_t... (cached) yes
checking libgen.h usability... yes
checking libgen.h presence... yes
checking for libgen.h... yes
checking for basename... yes
checking for int... (cached) yes
checking size of int... (cached) 4
checking for void *... (cached) yes
checking size of void *... (cached) 8
checking if your compiler understands `__attribute__'... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking return type of signal handlers... (cached) void
checking for strings.h... (cached) yes
checking for strcasecmp... yes
checking for xml2-config.64... no
checking for xml2-64-config... no
checking for xml2-config... /amd64/usr/bin/xml2-config
checking for libxml/parser.h... yes
checking for xmlParseDocument in -lxml2... yes
checking libxml/SAX2.h usability... yes
checking libxml/SAX2.h presence... yes
checking for libxml/SAX2.h... yes
configure: The following compiler options will be used to integrate
            the libxml2 XML parsing library:
            To find the libxml2 include files: -I/usr/include/libxml2
            To find the libxml2 library:       -L/amd64/usr/lib64 
-L/usr/lib -lxml2 -lz -lpthread -lm
            SAX2 support:                      HAVE_SAX2=1
checking for string.h... (cached) yes
checking for strdup... yes
checking for strtok_r... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking utime.h usability... yes
checking utime.h presence... yes
checking for utime.h... yes
checking sys/utime.h usability... no
checking sys/utime.h presence... no
checking for sys/utime.h... no
checking sys/times.h usability... yes
checking sys/times.h presence... yes
checking for sys/times.h... yes
checking whether time.h and sys/time.h may both be included... (cached) yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for struct tm.tm_zone... no
checking for tzname... yes
checking whether utime accepts a null argument... yes
checking for ftime... yes
checking for times... yes
checking for ctime_r... yes
checking for localtime_r... yes
checking ctime_r3... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating MonetDB-XQuery.spec
config.status: creating RunMapprove
config.status: creating RunMapprove.bat
config.status: creating RunMtest
config.status: creating RunMtest.bat
config.status: creating extra.mk
config.status: creating rpm.mk
config.status: creating compiler/Makefile
config.status: creating conf/Makefile
config.status: creating modules/Makefile
config.status: creating runtime/Makefile
config.status: creating runtime5/Makefile
config.status: creating src/Makefile
config.status: creating compiler/algebra/Makefile
config.status: creating compiler/core/Makefile
config.status: creating compiler/debug/Makefile
config.status: creating compiler/include/Makefile
config.status: creating compiler/mem/Makefile
config.status: creating compiler/mil/Makefile
config.status: creating compiler/parser/Makefile
config.status: creating compiler/schema/Makefile
config.status: creating compiler/semantics/Makefile
config.status: creating compiler/sql/Makefile
config.status: creating modules/pftijah/Makefile
config.status: creating runtime/xrpc/Makefile
config.status: creating src/tools/Makefile
config.status: creating compiler/algebra/map/Makefile
config.status: creating compiler/algebra/opt/Makefile
config.status: creating compiler/algebra/prop/Makefile
config.status: creating runtime/xrpc/admin/Makefile
config.status: creating runtime/xrpc/export/Makefile
config.status: creating pf_config.h
config.status: pf_config.h is unchanged
config.status: executing depfiles commands

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
MonetDB-users mailing list
MonetDB-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/monetdb-users

Reply via email to