Hi,
you can try the setup described by Alexey Zilber:
http://lists.gnu.org/archive/html/monit-general/2007-01/msg00006.html
--8<--
check process apache
with pidfile /var/run/httpd.pid
start program = "/etc/init.d/httpd start"
stop program = "/etc/init.d/httpd stop"
if failed host 192.168.1.25 port 80 for 3 times within 5 cycles
then exec "/usr/lib/heartbeat/hb_standby"
if failed host 192.168.1.26 port 80 for 3 times within 5 cycles
then exec "/usr/lib/heartbeat/hb_standby"
mode manual
group node2
--8<--
Martin
Jason wrote:
I am very impressed with monit, but I seem to be running into an issue
configuring it with high availability. My ideal scenario would be:
1. Start & monitor the high availability heartbeat process
2. Start & monitor my daemon process X
3. If X restarts more than 3 times within 5 cycles then
timeout or stop process X and /etc/init.d/heartbeat stop
(to fail over to my secondary system)
I have tried using "if changed pid...then" but that apparently does not
count if the pid changes due to monit, and of course, discovered that
only "timeout" works with "if 3 restarts within 5 cycles then..."
Can anyone provide a method to accomplish this?
Thank you very much,
-Jason
--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general
--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general
