Hey All,
I'd like to throw this out on the mailing list in the event that it
helps someone else out there. I've managed to get Monit working great
on HP-UX 11.11 v1 and v2, with a little finagling.
First off, you'll need these packages from the hp-ux open source
porting center (http://hpux.cs.utah.edu/)
* gcc
* flex
* bison
* gettext
* libiconv
* m4
* make
* zlib
If you'd like SSL support, you'll probably have to install the openssl-
related depots as well.
As usual, run ./configure and let it finish. It should use bison
instead of flex during the configure phase--it'll show up right at the
beginning. I had issues with the ported version of flex working
properly.
Before running 'gmake', edit the Makefile and on the LIBS line from
this:
LIB = -lfl -lcrypt -lnsl
to look like this:
LIB = -lpthread -lfl -lcrypt -lnsl
This is because HP decided to implement pthread stubs in the standard
C lib on HP-UX, and if you do not explicitly define pthread, it'll
inherit the stubs instead, and you'll get stuff like this in your log:
Warning: Failed to create the http server. Thread error -- Function is
not available.
Take a look here for more info: http://docs.hp.com/en/1896/pthreads.html
After making that change, do 'gmake; gmake install' and all should
work well.
Hope that helps someone!
-Brian
--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general
