no,
in such case do :
---8<-----------------------------------------------------------
check process pppd with pidfile /var/run/ppp0.pid
start program = "/usr/bin/pon dsl-provider"
stop program = "/usr/bin/poff dsl-provider"
if failed host www.google.com port 80 protocol http and request "/" for 2
cycles
then restart
---8<-----------------------------------------------------------
or
---8<-----------------------------------------------------------
# check pppd
check process pppd with pidfile /var/run/ppp0.pid
start program = "/usr/bin/pon dsl-provider"
stop program = "/usr/bin/poff dsl-provider"
# internet test
check host internet with address www.google.fr
if failed icmp type echo count 5 with timeout 30 seconds
then exec "/usr/bin/killall pppd"
---8<-----------------------------------------------------------
If pppd is killed, monit will see than ppp0.pid does not relate to a living
process,
and will start (and not restart) the pppd.
or
---8<-----------------------------------------------------------
# check pppd
check process pppd with pidfile /var/run/ppp0.pid
start program = "/usr/bin/pon dsl-provider"
stop program = "/usr/bin/poff dsl-provider"
depends on internet
# internet test
check host internet with address www.google.fr
if failed icmp type echo count 5 with timeout 30 seconds
then alert
---8<-----------------------------------------------------------
2nd and 3rd can let you use 'internet' for another dependance to another monit
definitions.
Thank you Eric, so if I put together what you suggest together with
what Philippe presented then I get the following
check process pppd with pidfile /var/run/ppp0.pid
start program = "/usr/bin/pon dsl-provider"
stop program = "/usr/bin/poff dsl-provider"
if failed host www.google.com port 80 protocol http and request "/" for
2 cycles
then exec "/usr/bin/killall pppd"
Is that right or would this just kill a stalled program? What I am
asking is would it then start again? (sorry to be so basic but I am on
a learning curve here)
On 04/28/2010 10:38 PM, Eric Pailleau wrote:
if failed icmp type echo count 5 with timeout 30 seconds
then exec "/bin/rm -f /var/run/ppp0.pid"
(if deleting of pid file is sufficient to let the pppd daemon
suiciding...
if not, prefere a "/usr/bin/killall pppd" )
------------------------------------------------------------------------
--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general
--
Salutations - Best regards - mit freundlichen Grüssen
----------------- [email protected] ------------------------------------
fr - Merci d'utiliser cette addresse pour le support ou question technique
en - Please use this address for any support or technical question
----------------- https://support.numlog.fr --------------------------------
fr - Privilégier la gestion de ticket d'incident (Clients NUMLOG)
en - Prefere our trouble ticket application (NUMLOG's customers)
--
To unsubscribe:
http://lists.nongnu.org/mailman/listinfo/monit-general
