Dear Martin, Yes I know about the coma option ready and been to the link given earlier. The problem I just dont get to pass the email from the mail server or for that any case any other email server except for gmail. What could be the problem? Any best solution to this? Regards,Shai.
From: [email protected] Subject: Re: Monit send email not working Date: Wed, 16 May 2012 20:04:25 +0200 To: [email protected] You can set more mail servers with the "set mailserver" statement by separating them with coma, see more details in the manual:http://www.mmonit.com/monit/documentation/monit.html#setting_a_mail_server_for_alert_messages You can also set event queue - in the case that the delivery will fail, the alert will be retried later:http://www.mmonit.com/monit/documentation/monit.html#event_queue Regards,Martin On May 16, 2012, at 6:59 PM, sukbir singh wrote:Dear Martin, Yes I will go with gmail as my first option. Because I saw monit have the option to set other email mail servers. I have tried the EHLO commands below is what I see 250-AUTH LOGIN250 -SIZE 20480000250-HELP250 AUTH=LOGIN This was done based on telnet to port 1000. If I use the second mail server as backup and in case my first one fails(gmail) then how about the from email settings in monit will still be my gmail is it? Thank you. Regards,Shai. From: [email protected] Subject: Re: Monit send email not working Date: Wed, 16 May 2012 08:41:27 +0200 To: [email protected] Shai, are you sure your mail server listens on port 1000? Are you sure it supports SSL? What you'll get back if you do this: telnet <you mailserver> 1000 If you'll get the SMTP server response, you can try "EHLO <hostname>" to get the list of supported features. If you have problem with your mail server - what is the reason to not use the Gmail when you tried to configure it and it works for you? Regards,Martin On May 16, 2012, at 6:23 AM, sukbir singh wrote:Dear Martin, In addition to that I have tried monit validate I get this. Sendmail error: 504 PLAIN authentication is not permitted by this server.Aborting event By adding using sslV2 then I get thismonit: Error setting cipher list 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' (no valid ciphers)Cannot open a connection to the mailserver 'mail.******.com:1000' -- Operation now in progressNo mail servers are availableAborting event Using sslV3 I get monit: Openssl engine error: error:1408F10B:SSL routines:func(143):reason(267)Cannot open a connection to the mailserver 'mail.****.com:1000' -- SuccessNo mail servers are availableAborting event Using tlsv1 I getSendmail error: 503 Bad sequence of commandsAborting event What could be the problem I tried all combination even with port 25 still could not get it through. Regards,Shai. From: [email protected] Subject: Re: Monit send email not working Date: Tue, 15 May 2012 19:59:46 +0200 To: [email protected] Hello Sukbir, please can you provide your current configuration which doesn't work? You mentioned the Gmail worked, the problem is with your other mail server now. How your "set mailserver" looks like? Regards,Martin On May 15, 2012, at 7:29 PM, sukbir singh wrote:Dear Martin, Is there any solution regarding my other mail server which are still not able to send the alert emails? Thank you. From: [email protected] Subject: Re: Monit send email not working Date: Mon, 14 May 2012 09:17:53 +0200 To: [email protected] You need to enable TLS with gmail mail servers: set mailserver smtp.gmail.com port 587 username "MYUSER" password "MYPASSWORD" using tlsv1 Regards,Martin On May 14, 2012, at 6:40 AM, sukbir singh wrote:Dear Martin, If I use gmail I get this error. Sendmail: error receiving data from the mailserver 'smtp.gmail.com' -- Resource temporarily unavailable Then if I use another different mail server I get this errorSendmail error: 504 PLAIN authentication is not permitted by this server. I think some thing is wrong on my configuration because it could not be all the mail servers are having problem right? Regards,Shai. From: [email protected] Subject: Re: Monit send email not working Date: Sun, 13 May 2012 21:33:03 +0200 To: [email protected] Hi, as the error message suggest, the problem is with the sender address, which is rejected by your mail server. To fix it, you can override it this way (replace the "[email protected]" with your address): --8<-- set mail-format { from: [email protected] }--8<-- Regards,Martin On May 13, 2012, at 6:27 PM, sukbir singh wrote:Dear All, I am monitoring a java application which listen on port 8000. This is how I have set the rule check process commServer8000 with pidfile /var/run/wrapper.commServer8000.pid # check your app pid if failed port 8000 # if you want to check your app that listen on port 9000 then alert Must I put the 8000 and the HTTP? If I remove the HTTP it works fine but my email sending is having problem below are some of the error I keep getting monit validate'commServer8000' process is not runningSendmail error: 550-Verification failed for <monit@localhost>Aborting eventmonit: Start or stop method not defined -- process commServer8000 monit validate'commServer8000' process is not runningSendmail error: 535 Incorrect authentication dataAborting eventmonit: Start or stop method not defined -- process commServer8000 I have set my mail server as this SET MAILSERVER mail.***.com PORT 26 USERNAME "user1" PASSWORD "passwd". What are my mistakes here? Thank you. -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general-- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general-- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general-- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general-- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general -- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general
-- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general
