Martin,
There’s nothing on the logs, only what I show below but because I killed the
process manually,
check process dbmail-timsieved with pidfile /rundbmail/dbmail-timsieved.pid
every 1 cycles
group dbmail
start program = "/etc/init.d/dbmail-timsieved start"
stop program = "/etc/init.d/dbmail-timsieved stop"
if failed port 2000 type tcp with timeout 20 seconds within 1 cycles then
restart
[WET Nov 6 21:02:34] error : 'dbmail-timsieved' process is not running
[WET Nov 6 21:02:35] info : 'dbmail-timsieved' trying to restart
[WET Nov 6 21:02:35] info : 'dbmail-timsieved' start:
/etc/init.d/dbmail-timsieved
[WET Nov 6 21:03:35] info : 'dbmail-timsieved' process is running with pid
31151
From: [email protected]
[mailto:[email protected]] On Behalf Of
Martin Pala
Sent: quinta-feira, 6 de Novembro de 2014 21:16
To: This is the general mailing list for monit
Subject: Re: Protocol for a SIEVED ?
Hi,
please can you post snip of the full service check + related monit log?
Regards,
Martin
On 06 Nov 2014, at 21:54, Jorge Bastos <[email protected]> wrote:
Hi,
Which protocol should i use for a SIEVED server?
I’m using it with:
if failed port 2000 type tcp with timeout 20 seconds within 1 cycles then
restart
But it got zombie and monit didn’t restarted it.
Thanks,
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
