OK, will do
On Tue, Dec 23, 2014 at 11:34 AM, Martin Pala <[email protected]>
wrote:
> You need to stop monit, then start it again ("monit -v" is sufficient).
> The attached output is just configuration dump + waked up running monit
> daemon. You will find the output in related syslog file - once the problem
> will occur again (monit thinks the process is running while it is stopped),
> please check/send the log.
>
> Regards,
> Martin
>
>
> On 23 Dec 2014, at 15:51, Russell Simpkins <[email protected]>
> wrote:
>
> Adding host allow 'localhost'
> Skipping redundant host 'localhost'
> Skipping redundant host 'localhost'
> Adding credentials for user 'admin'
> Adding PAM group 'monit'
> Adding PAM group 'users'
> Runtime constants:
> Control file = /etc/monitrc
> Log file = syslog
> Pid file = /var/run/monit.pid
> Id file = /root/.monit.id
> State file = /root/.monit.state
> Debug = True
> Log = True
> Use syslog = True
> Is Daemon = True
> Use process engine = True
> Poll time = 10 seconds with start delay 240 seconds
> Expect buffer = 256 bytes
> Mail from = (not defined)
> Mail subject = (not defined)
> Mail message = (not defined)
> Start monit httpd = True
> httpd bind address = localhost
> httpd portnumber = 2812
> httpd signature = True
> Use ssl encryption = False
> httpd auth. style = Basic Authentication and Host/Net allow list
>
> The service list contains the following entries:
>
> Process Name = recentnews-feed
> Pid file = /var/run/recentnews-feed.pid
> Monitoring mode = active
> Start program = '/sbin/service recentnews-feed start' timeout 30
> second(s)
> Stop program = '/sbin/service recentnews-feed stop' timeout 30
> second(s)
> Existence = if does not exist then restart
> Pid = if changed then alert
> PPid = if changed then alert
> Timeout = If restarted 50 times within 50 cycle(s) then
> unmonitor
>
> Process Name = nscd
> Pid file = /var/run/nscd/nscd.pid
> Monitoring mode = active
> Start program = '/etc/init.d/nscd start' timeout 30 second(s)
> Stop program = '/etc/init.d/nscd stop' timeout 30 second(s)
> Existence = if does not exist then restart
> Pid = if changed then alert
> PPid = if changed then alert
> Timeout = If restarted 5 times within 5 cycle(s) then
> unmonitor
>
> Process Name = nrpe
> Pid file = /var/run/nrpe.pid
> Monitoring mode = active
> Start program = '/etc/init.d/nrpe start' timeout 30 second(s)
> Stop program = '/etc/init.d/nrpe stop' timeout 30 second(s)
> Existence = if does not exist then restart
> Pid = if changed then alert
> PPid = if changed then alert
> Timeout = If restarted 5 times within 5 cycle(s) then
> unmonitor
>
> Process Name = httpd
> Pid file = /var/run/httpd/httpd.pid
> Monitoring mode = active
> Start program = '/etc/init.d/httpd start' timeout 30 second(s)
> Stop program = '/usr/bin/killall -9 httpd' timeout 30 second(s)
> Existence = if does not exist then restart
> Pid = if changed then alert
> PPid = if changed then alert
> Timeout = If restarted 5 times within 5 cycle(s) then
> unmonitor
>
> Process Name = emissary-master
> Pid file = /var/run/emissary.pid
> Monitoring mode = active
> Start program = '/etc/init.d/emissary start' timeout 30 second(s)
> Stop program = '/usr/bin/pkill -9 -f (emissary-master|emop_node)'
> timeout 30 second(s)
> Existence = if does not exist then restart
> Pid = if changed then alert
> PPid = if changed then alert
> Timeout = If restarted 5 times within 5 cycle(s) then
> unmonitor
>
> File Name = emissary-pidfile
> Path = /var/run/emissary.pid
> Monitoring mode = active
> Start program = '/etc/init.d/emissary start' timeout 30 second(s)
> Stop program = '/usr/bin/pkill -9 -f (emissary-master|emop_node)'
> timeout 30 second(s)
> Existence = if does not exist then restart
> Timestamp = if greater than 3600 second(s) then restart
>
> Process Name = du-glass-broker-feed
> Pid file = /var/run/DU_GlassBroker.php.pid
> Monitoring mode = active
> Start program = '/sbin/service du-glass-broker-feed start' timeout
> 30 second(s)
> Stop program = '/sbin/service du-glass-broker-feed stop' timeout
> 30 second(s)
> Existence = if does not exist then restart
> Pid = if changed then alert
> PPid = if changed then alert
> Timeout = If restarted 5 times within 5 cycle(s) then
> unmonitor
>
> System Name = du-proc-00001.du-proc.data-universe-production
> Monitoring mode = active
>
> ------------------------------------------------------------
> -------------------
> Monit daemon with PID 12702 awakened
>
> On Tue, Dec 23, 2014 at 9:42 AM, Martin Pala <[email protected]>
> wrote:
>
>> Then it should notice the process died quickly.
>>
>> Please run Monit in debug mode and send output:
>>
>> monit -vI
>>
>> Regards,
>> Martin
>>
>>
>> On 23 Dec 2014, at 15:33, Russell Simpkins <[email protected]>
>> wrote:
>>
>> Hi,
>>
>> I have the daemon set to 10 seconds
>>
>> set daemon 10
>> with start delay 240
>>
>>
>>
>> On Tue, Dec 23, 2014 at 8:57 AM, Martin Pala <[email protected]>
>> wrote:
>>
>>> Hi,
>>>
>>> what's the poll cycle settings? ("set daemon <seconds>" statement)
>>>
>>> Monit performs the checks and then sleep for given number of seconds. If
>>> you poll cycle is long, Monit will not notice the process died until next
>>> cycle.
>>>
>>> Regards,
>>> Martin
>>>
>>>
>>> On 23 Dec 2014, at 14:45, Russell Simpkins <[email protected]>
>>> wrote:
>>>
>>> Hi,
>>>
>>> I have a check on a process via a pid file that monit reported as up,
>>> when the pid was dead and I was wondering if there were any good tips for
>>> figuring out why. We're running monit 5.9. When I run a status, I can see
>>> my process listed as running and monitored:
>>>
>>> Process 'recentnews-feed'
>>> status Running
>>> monitoring status Monitored
>>> pid 9680
>>> parent pid 1
>>> uid 5005
>>> effective uid 5005
>>> gid 5006
>>> uptime 1d 3h 20m
>>> children 0
>>> memory kilobytes 1805064
>>> memory kilobytes total 1805064
>>> memory percent 25.7%
>>> memory percent total 25.7%
>>> cpu percent 0.1%
>>> cpu percent total 0.1%
>>> data collected Fri, 19 Dec 2014 04:14:04
>>>
>>> When I check to see if the pid is actually running, it's not there:
>>>
>>> $ ps -ef | grep -i 9680
>>> root 24520 24029 0 06:39 pts/0 00:00:00 grep -i 9680
>>>
>>>
>>> My monit config:
>>>
>>> check process recentnews-feed with pidfile /var/run/recentnews-feed.pid
>>> start program = "/sbin/service recentnews-feed start"
>>> stop program = "/sbin/service recentnews-feed stop"
>>> if 50 restarts within 50 cycles then timeout
>>>
>>> Again, just curious if this is a known issue in 5.9 or how to figure out
>>> why monit thought the pid was up when it was not.
>>>
>>> Thanks,
>>>
>>> Russ
>>> --
>>> To unsubscribe:
>>> https://lists.nongnu.org/mailman/listinfo/monit-general
>>>
>>>
>>>
>>> --
>>> To unsubscribe:
>>> https://lists.nongnu.org/mailman/listinfo/monit-general
>>>
>>
>> --
>> To unsubscribe:
>> https://lists.nongnu.org/mailman/listinfo/monit-general
>>
>>
>>
>> --
>> To unsubscribe:
>> https://lists.nongnu.org/mailman/listinfo/monit-general
>>
>
> --
> To unsubscribe:
> https://lists.nongnu.org/mailman/listinfo/monit-general
>
>
>
> --
> To unsubscribe:
> https://lists.nongnu.org/mailman/listinfo/monit-general
>
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
