set these to writable filesystems log pid id event queue Sent from my iPad
> On 28 Oct 2015, at 7:30 PM, Léo Chaupitre <[email protected]> wrote: > > Hello > > I try to use Monit on a Raspberry where the file system is read-only. > I have changed the config to set the log file on tmpfs therefore monit still > fails to start with below message: > > pi@domoticzpi:/tmp$ sudo /usr/bin/monit -vvI > Runtime constants: > Control file = /etc/monit/monitrc > Log file = /tmp/monit.log > Pid file = /var/run/monit.pid > Id file = /var/lib/monit/id > Debug = True > Log = True > Use syslog = False > Is Daemon = True > Use process engine = True > Poll time = 120 seconds with start delay 0 seconds > Expect buffer = 256 bytes > Event queue = base directory /var/lib/monit/events with 100 slots > Mail server(s) = xxxxxx:25 with timeout 30 seconds > Mail from = xxxxx > Mail subject = $SERVICE $EVENT at $DATE > Mail message = Monit $ACTION $SERVI..(truncated) > Start monit httpd = False > Alert mail to = xxxxxxx > Alert on = All events > > The service list contains the following entries: > > Process Name = domoticz > Pid file = /var/run/domoticz.pid > Monitoring mode = active > Start program = '/etc/init.d/domoticz.sh start' timeout 30 second(s) > Stop program = '/etc/init.d/domoticz.sh stop' timeout 30 second(s) > Existence = if does not exist 1 times within 1 cycle(s) then > restart else if succeeded 1 times within 1 cycle(s) then alert > Pid = if changed 1 times within 1 cycle(s) then alert > Ppid = if changed 1 times within 1 cycle(s) then alert > Port = if failed [127.0.0.1:8080 [HTTP via TCP] with timeout > 5 seconds and retry 0 time(s)] 1 times within 1 cycle(s) then restart else if > succeeded 1 times within 1 cycle(s) then alert > Timeout = If restarted 5 times within 5 cycle(s) then exec > '/sbin/reboot' timeout 0 cycle(s) > > System Name = system_domoticzpi > Monitoring mode = active > > ------------------------------------------------------------------------------- > Cannot open for write -- Read-only file system > > > Any Idea on how to fix this? > thanks > > > > -- > To unsubscribe: > https://lists.nongnu.org/mailman/listinfo/monit-general
-- To unsubscribe: https://lists.nongnu.org/mailman/listinfo/monit-general
