Well, I gave it a try (building 5.22.0 from source) and still a similar
issue but a different error message (more descriptive now). I attempted
with a couple of different browsers.
Any ideas what I got wrong?
[root@right rpmbuild]# monit -Iv
Adding credentials for user 'admin'
Runtime constants:
Control file = /etc/monitrc
Log file = /var/log/monit.log
Pid file = /run/monit.pid
Id file = /root/.monit.id
State file = /root/.monit.state
Debug = True
Log = True
Use syslog = False
Is Daemon = True
Use process engine = True
Limits = {
= programOutput: 512 B
= sendExpectBuffer: 256 B
= fileContentBuffer: 512 B
= httpContentBuffer: 1024 kB
= networkTimeout: 5 s
= programTimeout: 5 m
= stopTimeout: 30 s
= startTimeout: 30 s
= restartTimeout: 30 s
= }
On reboot = start
Poll time = 30 seconds with start delay 0 seconds
Start monit httpd = True
httpd bind address = 192.168.80.130
httpd portnumber = 443
httpd encryption = selfsigned: allow, pemfile:
/etc/pki/tls/certs/server.cer, clientpemfile: /etc/pki/tls/certs/test.cer
httpd signature = Enabled
httpd auth. style = Basic Authentication
The service list contains the following entries:
System Name = right.laptop
Monitoring mode = active
On reboot = start
Swap usage limit = if greater than 25.0% then alert
Memory usage limit = if greater than 75.0% then alert
CPU usage limit = if greater than 95.0% for 10 cycles then alert
Load avg. (5min) = if greater than 2.0 then alert
Load avg. (1min) = if greater than 4.0 then alert
-------------------------------------------------------------------------------
pidfile '/run/monit.pid' does not exist
Starting Monit 5.22.0 daemon with http interface at [192.168.80.130]:443
Starting Monit HTTP server at [192.168.80.130]:443
Monit HTTP server started
'right.laptop' Monit 5.22.0 started
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 17.1%]
'right.laptop' cpu usage check succeeded [current cpu usage = 0.0%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.4]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.3]
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 17.1%]
'right.laptop' cpu usage check succeeded [current cpu usage = 1.1%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.3]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.2]
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL accept error: error:140890C7:SSL
routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 17.1%]
'right.laptop' cpu usage check succeeded [current cpu usage = 1.1%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.3]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.1]
SSL accept error: error:140890C7:SSL
routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 22.1%]
'right.laptop' cpu usage check succeeded [current cpu usage = 25.6%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.3]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.5]
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 21.7%]
'right.laptop' cpu usage check succeeded [current cpu usage = 15.8%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.5]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.8]
SSL: read error -- error:140940E5:SSL routines:SSL3_READ_BYTES:ssl
handshake failure
SSL: write error -- error:1409E0E5:SSL routines:SSL3_WRITE_BYTES:ssl
handshake failure
HttpRequest: error -- client [192.168.80.1]: HTTP/1.0 400 No request found
SSL accept error: error:140890C7:SSL
routines:SSL3_GET_CLIENT_CERTIFICATE:peer did not return a certificate
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 21.7%]
'right.laptop' cpu usage check succeeded [current cpu usage = 3.1%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.4]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.5]
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 21.6%]
'right.laptop' cpu usage check succeeded [current cpu usage = 5.1%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.4]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.3]
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 17.7%]
'right.laptop' cpu usage check succeeded [current cpu usage = 7.7%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.4]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.3]
'right.laptop' swap usage check succeeded [current swap usage = 0.0%]
'right.laptop' mem usage check succeeded [current mem usage = 17.7%]
'right.laptop' cpu usage check succeeded [current cpu usage = 7.2%]
'right.laptop' loadavg(5min) check succeeded [current loadavg(5min) = 0.3]
'right.laptop' loadavg(1min) check succeeded [current loadavg(1min) = 0.2]
^CShutting down Monit HTTP server
Monit HTTP server stopped
Monit daemon with pid [4010] stopped
'right.laptop' Monit 5.22.0 stopped
On Thu, Apr 27, 2017 at 2:52 PM, Bryan Harris <[email protected]>
wrote:
> Well I'm not sure if I did it right. Here is what I did.
>
> yumdownloader --source monit
> cd /root/rpmbuild
> yum groupinstall "Development Tools"
> yum install openssl-devel pam-devel
>
> Now I edit the 5.14 version in monit.spec instead to say 5.22.0. And I
> have to download the new source file because yumdownloader got the old one.
>
> Then after that I could do a rpmbuild -ba monit.spec and the build
> succeeds to make a package. I will have to test out the build since right
> now I am just about to get off work and drive home. Hopefully it will work
> fine.
>
> I don't know if it's right or not. I guess I shall see.
>
> V/r,
> Bryan
>
> On Thu, Apr 27, 2017 at 2:38 PM, SZÉPE Viktor <[email protected]> wrote:
>
>> Hello Brian!
>>
>> Try rebuilding monit:
>> http://pkgs.fedoraproject.org/cgit/rpms/monit.git/
>>
>> Contact me if you need help.
>>
>>
>> All the best!
>> (contacts below)
>>
>>
>> Idézem/Quoting Bryan Harris <[email protected]>:
>>
>>
>> I see. Thanks for the help, I will give that a try first. I do wish the
>>> EPEL folks kept newer versions but they are sometimes behind on things.
>>>
>>
>>
>> SZÉPE Viktor
>> https://github.com/szepeviktor/debian-server-tools/blob/master/CV.md
>> --
>> +36-20-4242498 [email protected] skype: szepe.viktor
>> Budapest, III. kerület
>>
>>
>>
>>
>>
>
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
