2009/8/31 Danny Haak <[email protected]>: > Hi Glenn, > > My experience is that serial ports work using the same code in Windows > and Linux - with the only change being the port name. Does your serial > device need RTS/CTS lines? Are they set right? Is the timeout set > correctly? It is true i forget this , setting not always same, i suggest you to write them, with same as the one under Windows(parity, speed, bit stop , rts, end line ........) > > Best regards, > Danny Haak > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Glenn Martin > Sent: maandag 31 augustus 2009 3:27 > To: [email protected] > Subject: [Mono-list] Serial Ports > > We have a peice of code that is working without a hitch on windows. > However on Mono (Ubuntu Jaunty; runtime 2.4) We get nothing. No > exceptions, no errors but also its not connecting. Are there any > settings or configuration options, any gotchas that i need to know when > handling Serial ports on Mono on Linux? We have switched our code to use > the ubuntu device name (/dev/ttyS1) and have verified the device exixts > and works on that port, weve tested with PUTTY. > > Thanks > > Glenn R. Martin > _______________________________________________ > Mono-list maillist - [email protected] > http://lists.ximian.com/mailman/listinfo/mono-list > _______________________________________________ > Mono-list maillist - [email protected] > http://lists.ximian.com/mailman/listinfo/mono-list >
-- Cordially. Small Eric Quotations of the days: --------------------------------------------------------------------------- I have no special talents. I am only passionately curious _______________________________________________ Mono-list maillist - [email protected] http://lists.ximian.com/mailman/listinfo/mono-list
