Hi David I have the poly 2 inch poster tube material..as i invented a
rolling Machine wheni did big runsof posters in the 80s 90s//I stll
havethe sleeve and even 2 inch tubes..imade the machine witha metal
piope witha slot init,,attached toa electric mototor,,when you depressed
the footpedla it rolled tight..thenyouwouldput thesleevv over it and
relesse theposterinside thetubbing,,,and remove..I did 1000s that
way...the tubbing comes onlarge rolls in all widths...and i would cut
off and tuck inside.
Yazoo makes a 2 inch tube
mailing Tube,,,fromYazoo mils in Pa..i have them if you need one..
Hollywood Dream Factory® Tom 419-474-3065
On 2019-12-04 22:03, David Kusumoto wrote:
HELP!
VERY BAD LUCK BUYING MANY DS COPIES WITH THE "TRUE" FINAL USA R-RATING
PRINTED IN THE LOWER LEFT CORNER. Only one so far (since July) - has
passed condition tests for gift quality. All were listed "new" by
sellers and looked great in photos - but arrived with horizontal
rippling - or - creasing / bends at the top or bottom edges. Others
were replete with dimples down the center from top to bottom - or -
"scuff-type" wear along the vertical edges - way beyond the "few minor
dings" that are OK and common w/even "pristine" posters.
ANY THOUGHTS? I think the rippling is caused by tight hand-rolling -
to fit into 2 inch (or smaller!) diameter sleeves and tubes - (see
reference photos below - the posters always look good at first but
more probing reveals what I'm talking about).
I NEVER GET THIS FROM PRO DEALERS USING THREE-INCH DIAMETER TUBES -
BUT IT'S COMING UP A LOT WITH AMATEUR SELLERS.
SOMEONE PLEASE SET ME STRAIGHT. I think these new-release posters are
machine rolled into tubes for theaters - but after re-sellers take
them out to take photos - they don't know how to re-roll large format
paper - by hand - and in a straight line - causing them to make too
many hand-adjustments to get them to fit back into these narrow tubes.
When I bring it up, they say, "it was mint when shipped." They're not
aware of what happens when they use narrow sleeves or tubes.
OTHER POSTERS HAVE SHOWN UP W/SMALL, BUT HARD CREASE EDGE WEAR along
the vertical sides (vs. normal dings).
OF COURSE I GET THAT PERFECTION IS IMPOSSIBLE - I just don't want to
be embarrassed gifting LESS than "near mint" / near pristine posters
for RECENT titles. If you have ideas or can help - please message me
with price and condition. Thank you! (See photos below.)
David
https://imagizer.imageshack.com/img923/8326/307NyQ.jpg [1]
https://imagizer.imageshack.com/img924/6903/8p5E46.jpg [2]
https://imagizer.imageshack.com/img922/4617/CSHbrW.jpg [3]
https://imagizer.imageshack.com/img923/6374/um9qeS.jpg [4]
https://imagizer.imageshack.com/img924/2143/7ElGAV.jpg [5]
https://imagizer.imageshack.com/img923/8076/FzvCVE.jpg [6]
https://imagizer.imageshack.com/img924/4572/zKlwSw.jpg [7]
https://imagizer.imageshack.com/img921/5481/wI4Ovk.jpg [8]
-------------------------
To unsubscribe from the MoPo-L list, click the following link:
https://listserv.american.edu/scripts/wa-american.exe?SUBED1=MoPo-L&A=1
[9]
Links:
------
[1] https://imagizer.imageshack.com/img923/8326/307NyQ.jpg
[2] https://imagizer.imageshack.com/img924/6903/8p5E46.jpg
[3] https://imagizer.imageshack.com/img922/4617/CSHbrW.jpg
[4] https://imagizer.imageshack.com/img923/6374/um9qeS.jpg
[5] https://imagizer.imageshack.com/img924/2143/7ElGAV.jpg
[6] https://imagizer.imageshack.com/img923/8076/FzvCVE.jpg
[7] https://imagizer.imageshack.com/img924/4572/zKlwSw.jpg
[8] https://imagizer.imageshack.com/img921/5481/wI4Ovk.jpg
[9]
https://listserv.american.edu/scripts/wa-american.exe?SUBED1=MoPo-L&A=1
----
Visit the MoPo Mailing List Web Site at www.filmfan.com
___________________________________________________________________
How to UNSUBSCRIBE from the MoPo Mailing List
Send a message addressed to: [email protected]
In the BODY of your message type: SIGNOFF MOPO-L
The author of this message is solely responsible for its content.
