----- Forwarded message from "Lewis, Dr. Donald"
<dle...@ksbhospital.com> -----
Date: Wed, 13 Nov 2013
21:01:32 -0500
From: "Lewis, Dr. Donald"
<dle...@ksbhospital.com>
Reply-To: "Lewis, Dr. Donald"
<dle...@ksbhospital.com>
Subject: RE: problem with
wireframe/polygons-Morphologika
To: Dan Proctor
<danielproc...@yahoo.com>
Dan,
Thanks. It runs perfectly. However, seeing the wireframes and polygons, I see
that two of the re-measurings are outliers with regards to several landmarks.
Since these are remeasurings of the same specimen,this means that I have an
internal control problem. I have been using the handswitch for the MicroScribe.
I better go to using the foot pedal and make sure I am not moving the stylus
when entering. I can't expect to compare things when internal reliability is not
a great deal better.
Thanks for your help. In the end, it was indeed something very simple.
Best Regards,
Don
-----Original Message-----
From: Dan Proctor [mailto:danielproc...@yahoo.com]
Sent: Wed 11/13/2013 9:28 AM
To: Lewis, Dr. Donald
Subject: Re: problem with wireframe/polygons-Morphologika
Hi Donald,
I think I've fixed it, though I don't know specifically the original
cause. I've found that sometimes extra characters like spaces or tabs
seem to cause issues with reading a data file, but I've never identified
why or any sort of pattern.
Good luck!
best,
Dan Proctor
On 11/13/2013 1:47 AM, morphmet_modera...@morphometrics.org wrote:
> ----- Forwarded message from "Lewis, Dr. Donald"
<dle...@ksbhospital.com> -----
>
> Date: Tue, 12 Nov 2013 13:09:10 -0500
> From: "Lewis, Dr. Donald" <dle...@ksbhospital.com>
> Reply-To: "Lewis, Dr. Donald"
<dle...@ksbhospital.com>
> Subject: problem with wireframe/polygons-Morphologika
> To: morphmet@morphometrics.org
>
> All,
> I have been using Morphologika for two years now without the problem with
which I now need assistance:
> I have a file with 31 landmarks, 10 individuals, and have used the very
same wireframe and polygon listings which have consistently worked.
> To anyone willing to help me, I have attached the first file (to which I
will add letter "A" in front to denote the non-faulty file) and a second file,
the one with only 10 specimens, prefixed "B" ( modern Homo sapiens,5
remeasurings of the same specimen with MicroScribe, and 5 remeasurings of a
CroMagnon specimen). It is this second file which yields the following error
message: "problem loading data. [wireframe] 6 320"
>
> I have tried removing various subsets of the wireframe, removing all or
part of the polygons, etc. I have checked all my source files. I cannot find any
error. I have referred to the manual and found that even if I get rid of all the
wireframes, I get a similar error message, just with "polygons" in it.
> I must be doing something wrong.
> If someone would look at the files and run each in Morphologika, it would
help me a great deal.
>
> Thank You to anyone able to help me, as my current project is delayed by
this "glitch"
>
> Don Lewis
>
> Please consider the environment before printing this email.
>
> Confidentiality Notice
>
> This electronic mail transmission and any accompanying documents contain
information belonging to the sender, which may be confidential and legally
privileged. This information is intended only for the use of the individual or
entity to whom this electronic mail transmission was sent as indicated above. If
you are not the intended recipient, any disclosure, copying, distribution, or
action taken in reliance on the contents of the information contained in this
transmission is strictly prohibited. If you are not the addressee identified
above, you have received this transmission in error, and we ask that you please
call us collect at 815.288.5531 to report the receipt, and that you immediately
delete the transmission.
>
> Thank you.
>
> ----- End forwarded message -----
>
Please consider the environment before printing this email.
Confidentiality Notice This electronic mail transmission and any accompanying documents contain information belonging to the sender, which may be confidential and legally privileged. This information is intended only for the use of the individual or entity to whom this electronic mail transmission was sent as indicated above. If you are not the intended recipient, any disclosure, copying, distribution, or action taken in reliance on the contents of the information contained in this transmission is strictly prohibited. If you are not the addressee identified above, you have received this transmission in error, and we ask that you please call us collect at 815.288.5531 to report the receipt, and that you immediately delete the transmission. Thank you.
----- End forwarded message
-----
