Hello,
There's no results for grep!
Regards
SG

2010/9/27, Hieu Hoang <[email protected]>:
>   grep your model files. I'm pretty sure there's a | character in there
> somewhere
>
> On 27/09/2010 15:02, Souhir Gahbiche wrote:
>> I'm sure that there's no bar characters in the data.
>>
>> SG
>>
>> 2010/9/27, Miles Osborne<[email protected]>:
>>> looking at your output:
>>>> [ERROR] Malformed input at
>>>   Expected input to have words composed of 1 factor(s) (form
>>> FAC1|FAC2|...)
>>>   but instead received input with 0 factor(s).
>>> sh: line 1:  5114 Aborted
>>> make sure you have no bar (|) characters in the data
>>>
>>> Miles
>>>
>>>
>>> On 27 September 2010 14:45, Souhir Gahbiche<[email protected]>  wrote:
>>>> Hi all,
>>>>
>>>> I'm trying to tune my system, but the tuning stops at the first
>>>> iteration. Here is my mert.log file:
>>>>
>>>> After default: -l mem_free=0.5G -hard
>>>> Using SCRIPTS_ROOTDIR:
>>>> /vol/mt2/tools/nadi/moses-scripts/scripts-20090923-1833/
>>>> SYNC distortionchecking weight-count for ttable-file
>>>> checking weight-count for lmodel-file
>>>> checking weight-count for distortion-file
>>>> Executing: mkdir -p /working/tuningdev2009/mert
>>>> Executing:
>>>> /vol/mt2/tools/nadi/moses-scripts/scripts-20090923-1833//training/filter-model-given-input.pl
>>>> ./filtered /tmp/souhir
>>>> /model/mosesdev2009.ini
>>>> /working/tuningdev2009/ar.project-syndicate.2009-07.v1.de
>>>> v.bw.mada.tok
>>>> filtering the phrase tables... Fri Aug 27 16:43:10 CEST 2010
>>>> The filtered model was ready in /working/tuningdev2009/mert/filtered,
>>>> not doing a
>>>> nything.
>>>> run 1 start at Fri Aug 27 16:43:10 CEST 2010
>>>> Parsing --decoder-flags: |-v 0|
>>>> Saving new config to: ./run1.moses.ini
>>>> Saved: ./run1.moses.ini
>>>> Normalizing lambdas: 0 1 1 1 1 1 1 1 1 0.3 0.2 0.3 0.2 0
>>>> DECODER_CFG = -w %.6f -lm %.6f -d %.6f %.6f %.6f %.6f %.6f %.6f %.6f
>>>> -tm %.6f %.6f %.6f %.6f %.6f
>>>>      values = 0 0.111111111111111 0.111111111111111 0.111111111111111
>>>> 0.111111111111111 0.111111111111111 0.111111111111111 0.1
>>>> 11111111111111 0.111111111111111 0.0333333333333333 0.0222222222222222
>>>> 0.0333333333333333 0.0222222222222222 0
>>>> Executing: /vol/mt2/tools/nadi/moses/moses-cmd/src/moses -v 0  -config
>>>> filtered/moses.ini -inputtype 0 -w 0.000000 -lm 0.111111
>>>>   -d 0.111111 0.111111 0.111111 0.111111 0.111111 0.111111 0.111111 -tm
>>>> 0.033333 0.022222 0.033333 0.022222 0.000000  -n-best-li
>>>> st run1.best100.out 100 -i
>>>> /working/tuningdev2009/ar.project-syndicate.2009-07.v1
>>>> .dev.bw.mada.tok>  run1.out
>>>> (1) run decoder to produce n-best lists
>>>> params = -v 0
>>>> decoder_config = -w 0.000000 -lm 0.111111 -d 0.111111 0.111111
>>>> 0.111111 0.111111 0.111111 0.111111 0.111111 -tm 0.033333 0.0222
>>>> 22 0.033333 0.022222 0.000000
>>>> Loading lexical distortion models...
>>>> have 1 models
>>>> Creating lexical reordering...
>>>> weights: 0.111 0.111 0.111 0.111 0.111 0.111
>>>> Loading table into memory...done.
>>>> Created lexical orientation reordering
>>>> [ERROR] Malformed input at
>>>>   Expected input to have words composed of 1 factor(s) (form
>>>> FAC1|FAC2|...)
>>>>   but instead received input with 0 factor(s).
>>>> sh: line 1:  5114 Aborted
>>>> /vol/mt2/tools/nadi/moses/moses-cmd/src/moses -v 0 -config
>>>> filtered/moses.ini -inputt
>>>> ype 0 -w 0.000000 -lm 0.111111 -d 0.111111 0.111111 0.111111 0.111111
>>>> 0.111111 0.111111 0.111111 -tm 0.033333 0.022222 0.033333
>>>>   0.022222 0.000000 -n-best-list run1.best100.out 100 -i
>>>> /working/tuningdev2009/ar
>>>> .project-syndicate.2009-07.v1.dev.bw.mada.tok>  run1.out
>>>> Exit code: 134
>>>> The decoder died. CONFIG WAS -w 0.000000 -lm 0.111111 -d 0.111111
>>>> 0.111111 0.111111 0.111111 0.111111 0.111111 0.111111 -tm 0.0
>>>> 33333 0.022222 0.033333 0.022222 0.000000
>>>>
>>>> The file run1.out is empty. I tried many times, but every time it
>>>> stopps at the same level.
>>>> I looked for the moses.ini. It works perfectly when I use two phrase
>>>> tables.
>>>>
>>>> Here's my moses.ini used :
>>>>
>>>> #########################
>>>> ### MOSES CONFIG FILE ###
>>>> #########################
>>>>
>>>> # input factors
>>>> [input-factors]
>>>> 0
>>>>
>>>> # mapping steps
>>>> [mapping]
>>>> 0 T 0
>>>>
>>>> # translation tables: source-factors, target-factors, number of scores,
>>>> file
>>>> [ttable-file]
>>>> 0 0 5 /working/model/phrase
>>>>
>>>> # no generation models, no generation-file section
>>>>
>>>> # language models: type(srilm/irstlm), factors, order, file
>>>> [lmodel-file]
>>>> 0 0 4 /working/lmm/newsLM+news-train08.fr.4gki.arpa.gz
>>>>
>>>> # limit on how many phrase translations e for each phrase f are loaded
>>>> # 0 = all elements loaded
>>>> [ttable-limit]
>>>> 20
>>>>
>>>> # distortion (reordering) files
>>>> [distortion-file]
>>>> 0-0 msd-bidirectional-fe 6 /working/model/reordering-table.gz
>>>>
>>>> # distortion (reordering) weight
>>>> [weight-d]
>>>> 0.3
>>>> 0.3
>>>> 0.3
>>>> 0.3
>>>> 0.3
>>>> 0.3
>>>> 0.3
>>>>
>>>> # language model weights
>>>> [weight-l]
>>>> 0.5000
>>>>
>>>> # translation model weights
>>>> [weight-t]
>>>> 0.2
>>>> 0.2
>>>> 0.2
>>>> 0.2
>>>> 0.2
>>>>
>>>> # no generation models, no weight-generation section
>>>>
>>>> # word penalty
>>>> [weight-w]
>>>> -1
>>>>
>>>> [distortion-limit]
>>>> 6
>>>>
>>>> Any ideas?
>>>> Thanks
>>>> SG
>>>> _______________________________________________
>>>> Moses-support mailing list
>>>> [email protected]
>>>> http://mailman.mit.edu/mailman/listinfo/moses-support
>>>>
>>>
>>>
>>> --
>>> The University of Edinburgh is a charitable body, registered in
>>> Scotland, with registration number SC005336.
>>>
>> _______________________________________________
>> Moses-support mailing list
>> [email protected]
>> http://mailman.mit.edu/mailman/listinfo/moses-support
>>
>>
> _______________________________________________
> Moses-support mailing list
> [email protected]
> http://mailman.mit.edu/mailman/listinfo/moses-support
>
_______________________________________________
Moses-support mailing list
[email protected]
http://mailman.mit.edu/mailman/listinfo/moses-support

Reply via email to