Hi,
Thanks for your suggestion. The problem is our server is not networked
so svn is not available. Anyway, I downloaded the GNU tarball and it works.
For those who want to try the 20100813, someone says it will work after
installing boost. Hope you good luck.
And for those who want to download the GNU tarball, the
mosesdecoder-trunk.tar.gz is much smaller than mosesdecoder.tar.gz. 5.76M VS
238M here.
Best,
----------------------------------------------------
Best wishes!
Xianhua Li (李贤华)
Information Technology Laboratory
Fujitsu Research & Development Center Co.,LTD.
13F Tower A, Ocean International Center,
No.56 Dong Si Huan Zhong Rd, Chaoyang District, Beijing, China ,100025
E-mail:[email protected]
-----邮件原件-----
发件人: Barry Haddow [mailto:[email protected]]
发送时间: 2011年9月30日 22:29
收件人: [email protected]
抄送: Li Xianhua; [email protected]
主题: Re: [Moses-support] errors with memscore when installing Moses20100813
Hi
The version you're using is rather old. Could you try with the latest from
svn?
cheers - Barry
On Friday 30 September 2011 04:48:52 Li Xianhua wrote:
> Hi everyone,
>
> I tried to install moses20100813 but failed.
> I have installed moses20080711 and mosesdecoder in trunk, both of
> them work well.
> So I am confused why 20100813 failed.
> It seems memscore failed and here are the steps.
>
> 1.install giza++ and mkcls
> 2.install srilm
> Both successful.
>
> 3.download moses20100813 and in windows and copy to linux
> Unzip 20100813.zip. following are the commands:
> ./regenerate-makefiles.sh
> ./configure --with-srilm=/home/lxh/04mosesTest/srilm
> make -j 4
> cd script
> mkdir bin
> mkdir target
> cd bin
> cp ../../../giza-pp/GIZA++-v2/GIZA++ .
> cp ../../../giza-pp/GIZA++-v2/snt2cooc.out .
> cp ../../../giza-pp/mkcls-v2/mkcls .
> cd ../
> vi Makefile
>
>
> modify line 13-14 to:
> TARGETDIR=/home/lxh/04mosesTest/moses/scripts/target
> BINDIR=/home/lxh/04mosesTest/moses/scripts/bin
>
> Modify line 79 to:
> perl check-dependencies.pl "$(HOME)" "$(TARGETDIR)" "$(RELEASEDIR)"
> "$(BINDIR)"
>
> then
> make release
>
> Here is the error message:
>
> # Compile the parts
> make all
> make[1]: Entering directory `/home/lxh/04mosesTest/moses/scripts'
> # Building memscore may fail e.g. if boost is not available.
> # We ignore this because traditional scoring will still work and memscore
> isn't used by default.
> cd training/memscore ; \
> ./configure && make \
>
> || ( echo "WARNING: Building memscore failed."; \
>
> echo 'training/memscore/memscore' >> ../../release-exclude )
> checking for a BSD-compatible install... /usr/bin/install -c
> checking whether build environment is sane... yes
> checking for gawk... gawk
> checking whether make sets $(MAKE)... yes
> checking for g++... g++
> checking for C++ compiler default output file name... a.out
> checking whether the C++ compiler works... yes
> checking whether we are cross compiling... no
> checking for suffix of executables...
> checking for suffix of object files... o
> checking whether we are using the GNU C++ compiler... yes
> checking whether g++ accepts -g... yes
> checking for style of include used by make... GNU
> checking dependency style of g++... gcc3
> checking for gcc... gcc
> checking whether we are using the GNU C compiler... yes
> checking whether gcc accepts -g... yes
> checking for gcc option to accept ISO C89... none needed
> checking dependency style of gcc... gcc3
> checking for boostlib >= 1.31.0... yes
> checking for cos in -lm... yes
> checking for gzopen in -lz... yes
> checking for cblas_dgemm in -lgslcblas... no
> checking for gsl_blas_dgemm in -lgsl... no
> checking how to run the C++ preprocessor... g++ -E
> checking for grep that handles long lines and -e... /bin/grep
> checking for egrep... /bin/grep -E
> checking for ANSI C header files... yes
> checking for sys/types.h... yes
> checking for sys/stat.h... yes
> checking for stdlib.h... yes
> checking for string.h... yes
> checking for memory.h... yes
> checking for strings.h... yes
> checking for inttypes.h... yes
> checking for stdint.h... yes
> checking for unistd.h... yes
> checking n_gram.h usability... yes
> checking n_gram.h presence... yes
> checking for n_gram.h... yes
> checking for size_t... yes
> checking for ptrdiff_t... yes
> configure: creating ./config.status
> config.status: creating Makefile
> config.status: creating config.h
> config.status: config.h is unchanged
> config.status: executing depfiles commands
> make[2]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/memscore'
> make all-am
> make[3]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/memscore'
> g++ -I/usr/include -Wall -ffast-math -ftrapping-math -fomit-frame-pointer
> -g -O2 -o memscore phrasetable.o memscore.o scorer.o lexdecom.o
> phraselm.o -lz -lm
> phraselm.o: In function
> `PhraseLanguageModel::compute_lmscores(PhraseInfoList&, bool)':
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:27:
> undefined reference to `lmtable::lmtable(float, float)'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:29:
> undefined reference to `lmtable::load(std::basic_istream<char,
> std::char_traits<char> >&, char const*, char const*, int, OUTFILE_TYPE)'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:37:
> undefined reference to `ngram::ngram(dictionary*, int)'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:40:
> undefined reference to `ngram::pushw(char const*)'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:41:
> undefined reference to `ngram::ngram(ngram&)'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:41:
> undefined reference to `lmtable::clprob(ngram, double*, int*, char**,
> unsigned int*)'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:54:
> undefined reference to `lmtable::~lmtable()'
> /home/lxh/04mosesTest/moses/scripts/training/memscore/phraselm.cpp:54:
> undefined reference to `lmtable::~lmtable()'
> collect2: ld returned 1 exit status
> make[3]: *** [memscore] Error 1
> make[3]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/memscore'
> make[2]: *** [all] Error 2
> make[2]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/memscore'
> WARNING: Building memscore failed.
> touch release-exclude # No files excluded by default
> pwd=`pwd`; \
> for subdir in cmert-0.5 phrase-extract symal mbr
> lexical-reordering; do \
> make -C training/$subdir || exit 1; \
> echo "### Compiler $subdir"; \
> cd $pwd; \
> done
> make[2]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/cmert-0.5'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/cmert-0.5'
> ### Compiler cmert-0.5
> make[2]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/phrase-extract'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/phrase-extract'
> ### Compiler phrase-extract
> make[2]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/symal'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/symal'
> ### Compiler symal
> make[2]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/mbr'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/mbr'
> ### Compiler mbr
> make[2]: Entering directory
> `/home/lxh/04mosesTest/moses/scripts/training/lexical-reordering'
> make[2]: Nothing to be done for `all'.
> make[2]: Leaving directory
> `/home/lxh/04mosesTest/moses/scripts/training/lexical-reordering'
> ### Compiler lexical-reordering
> ## All files that need compilation were compiled
> make[1]: Leaving directory `/home/lxh/04mosesTest/moses/scripts'
> perl check-dependencies.pl "/root"
> "/home/lxh/04mosesTest/moses/scripts/target"
> "/home/lxh/04mosesTest/moses/scripts/target/scripts-20110930-1116"
> "/home/lxh/04mosesTest/moses/scripts/bin"
> mkdir -p /home/lxh/04mosesTest/moses/scripts/target/scripts-20110930-1116
> cat ./released-files \
>
> | grep -v -x -f release-exclude \
> | rsync -r --files-from - .
>
> /home/lxh/04mosesTest/moses/scripts/target/scripts-20110930-1116/
> rsync: link_stat
> "/home/lxh/04mosesTest/moses/scripts/training/memscore/memscore" failed: No
> such file or directory (2)
> rsync error: some files could not be transferred (code 23) at main.c(977)
> [sender=2.6.9]
> make: *** [release] Error 23
>
>
> in folder target, the scripts with timestamp does exist. But when I used
> train-model.perl, error message comes:
>
> Using SCRIPTS_ROOTDIR:
> /home/lxh/04mosesTest/moses/scripts/target/scripts-20110928-1645
> Using single-thread GIZA
> ERROR: Cannot find mkcls, GIZA++, & snt2cooc.out in
> /home/pkoehn/statmt/bin. Did you install this script using 'make release'?
> at
> /home/lxh/04mosesTest/moses/scripts/target/scripts-20110928-1645/training/t
> r ain-model.perl line 204.
>
> Has anyone come up with this problem before?
>
> Best,
>
> lixianhua
>
>
> _______________________________________________
> Moses-support mailing list
> [email protected]
> http://mailman.mit.edu/mailman/listinfo/moses-support
>
--
The University of Edinburgh is a charitable body, registered in
Scotland, with registration number SC005336.
_______________________________________________
Moses-support mailing list
[email protected]
http://mailman.mit.edu/mailman/listinfo/moses-support
