Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Python/Tkinter (Yannick Hagmann)
----------------------------------------------------------------------
Message: 1
Date: Thu, 24 Sep 2015 06:38:48 +0200
From: Yannick Hagmann <[email protected]>
Subject: [Motion-user] Python/Tkinter
To: [email protected]
Message-ID:
<caova+js0wzftlkuvjmwmfr4tzimjsr3zjdvjdqwzgj+9ayo...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hello
Is there a specific reason, why you don't use Python/Tkinter to change
parameters?
I think the script is getting quite convoluted.
Cheers,
Yannick
2015-09-24 6:09 GMT+02:00 <[email protected]>:
> Send Motion-user mailing list submissions to
> [email protected]
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.sourceforge.net/lists/listinfo/motion-user
> or, via email, send a message with subject or body 'help' to
> [email protected]
>
> You can reach the person managing the list at
> [email protected]
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Motion-user digest..."
>
>
> Today's Topics:
>
> 1. Re: Pi & Logitech C920 (Mr Dave)
> 2. Re: RTSP cant be opened in motion. Why? (tosiara)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 23 Sep 2015 19:11:09 -0600
> From: Mr Dave <[email protected]>
> Subject: Re: [Motion-user] Pi & Logitech C920
> To: [email protected]
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> OK. That is good. It looks like it is up, found your camera, started
> working, detected motion. Then quit cleanly. The issue now appears
> that it is within the parameters. From the log posted, it appears that
> it is still using the defaults (see the resolution reported when it is
> looking at the PIX format). So you may want to check that you changed
> the right file. (Look where it installed via the messages from the make
> install step). Also check all the other parameters like target_dir and
> possibly try it in non-daemon mode first for testing /debugging
>
> Dave
>
>
>
>
> On 9/23/2015 1:52 PM, Dave Howorth wrote:
> > I tried autoreconf -f and it built without error. I edited the init
> > script to use /etc/local/bin/motion for DAEMON and changed motion.conf
> > to be 1280x720 and restarted the service.
> >
> > Sadly, it detected motion and exited but did not create any image or
> > video files:
> >
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > Using default log level (NTC) (6)
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > Motion Unofficial-Git-UNKNOWN Started
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > Logging to syslog
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > Using default log type (ALL)
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] motion_startup:
> > Using log type (ALL) log level (NTC)
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Thread 1 is
> > device: /dev/video0 input -1
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Stream port 0
> > Sep 23 20:36:02 raspberrypi motion: [0] [NTC] [ALL] main: Waiting for
> > threads to finish, pid: 7205
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [ALL] motion_init: Thread
> > 1 started , motion detection Enabled
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] vid_v4lx_start:
> > Using videodevice /dev/video0 and input -1
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_get_capability:
> > #012------------------------#012cap.driver: "uvcvideo"#012cap.card: "HD
> > Pro Webcam C920"#012cap.bus_info:
> >
> "usb-bcm2708_usb-1.2"#012cap.capabilities=0x04000001#012------------------------
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_get_capability:
> > - VIDEO_CAPTURE
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_get_capability:
> > - STREAMING
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_select_input:
> > name = "Camera 1", type 0x00000002, status 00000000
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_select_input: -
> > CAMERA
> > Sep 23 20:36:02 raspberrypi motion: [1] [WRN] [VID] v4l2_select_input:
> > Device doesn't support VIDIOC_G_STD
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > Config palette index 17 (YU12) doesn't work.
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > Supported palettes:
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > (0) YUYV (YUV 4:2:2 (YUYV))
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > 0 - YUV 4:2:2 (YUYV) (compressed : 0) (0x56595559)
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > (1) H264 (H.264)
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > 1 - H.264 (compressed : 1) (0x34363248)
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > (2) MJPG (MJPEG)
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format:
> > 2 - MJPEG (compressed : 1) (0x47504a4d)
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_set_pix_format
> > Selected palette YUYV
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> > v4l2_do_set_pix_format: Testing palette YUYV (352x288)
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID]
> > v4l2_do_set_pix_format: Using palette YUYV (352x288) bytesperlines 704
> > sizeimage 202752 colorspace 00000008
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > found control 0x00980900, "Brightness", range 0,255
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > #011"Brightness", default -8193, current 128
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > found control 0x00980901, "Contrast", range 0,255
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > #011"Contrast", default 57343, current 128
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > found control 0x00980902, "Saturation", range 0,255
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > #011"Saturation", default 57343, current 128
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > found control 0x00980918, "Power Line Frequency", range 0,2
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > #011"Power Line Frequency", default 2, current 2
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > found control 0x00980913, "Gain", range 0,255
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] v4l2_scan_controls:
> > #011"Gain", default 57343, current 0
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [VID] vid_v4lx_start:
> > Using V4L2
> > Sep 23 20:36:02 raspberrypi motion: [1] [NTC] [ALL] image_ring_resize:
> > Resizing pre_capture buffer to 1 items
> > Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [EVT] event_new_video FPS
> > 14
> > Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [ALL] motion_detected:
> > Motion detected - starting event 1
> > Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [ALL] motion_loop: Thread
> > exiting
> > Sep 23 20:37:29 raspberrypi motion: [1] [NTC] [VID] vid_close: Closing
> > video device /dev/video0
> > Sep 23 20:37:29 raspberrypi motion: [0] [NTC] [ALL] main: Threads
> > finished
> > Sep 23 20:37:30 raspberrypi motion: [0] [NTC] [ALL] main: Motion
> > terminating
> >
> >
> > Also $ lsb_release -a
> > No LSB modules are available.
> > Distributor ID: Debian
> > Description: Debian GNU/Linux 7.0 (wheezy)
> > Release: 7.0
> > Codename: wheezy
> >
> >
> > Cheers, Dave
> >
> > On Tue, 2015-09-22 at 20:12 -0600, Mr Dave wrote:
> >> I have just checked this on my PI and it appears to function correctly.
> >>
> >> Can you tell us the image that you are using so we can test it?
> >>
> >> Also, you may want to check the motion_guide.html and INSTALL files
> >> distributed with the source code. I have updated them to have current
> >> building/installing instructions as well as all the new and different
> >> options. It may be as simple as using the
> >>
> >> autoreconf -f
> >>
> >> option instead of the sequence that you've indicated.
> >>
> >> MrDave
> >>
> >> On 9/22/2015 5:54 PM, Mr Dave wrote:
> >>> Yes, that is definitely broken. Sorry about that. I'm pretty sure
> >>> that this change is only on the unstable branch which is in testing.
> >>> Can you switch to the master branch and test it again? The following
> >>> switches your sources over to master which doesn't have the offending
> >>> code but does have the changes I think you are looking for.
> >>>
> >>> git checkout master
> >>> autoreconf
> >>> ./configure
> >>> make
> >>> make install
> >>>
> >>>
> >>> MrDave
> >>>
> >>>
> >>> On 9/22/2015 4:14 PM, Dave Howorth wrote:
> >>>> Thanks for that. I've just downloaded it and am trying to compile it
> but
> >>>> I ran into something I don't understand. It's the first time I tried
> to
> >>>> compile something on the pi. I ran:
> >>>>
> >>>> $ autoheader
> >>>> $ autoconf configure.ac > configure
> >>>> $ sudo apt-get install libjpeg-dev
> >>>>
> >>>> but when I
> >>>> $ ./configure
> >>>> it says
> >>>>
> >>>> checking for gcc... gcc
> >>>> checking whether the C compiler works... yes
> >>>> checking for C compiler default output file name... a.out
> >>>> checking for suffix of executables...
> >>>> checking whether we are cross compiling... no
> >>>> checking for suffix of object files... o
> >>>> checking whether we are using the GNU C compiler... yes
> >>>> checking whether gcc accepts -g... yes
> >>>> checking for gcc option to accept ISO C89... none needed
> >>>> checking how to run the C preprocessor... gcc -E
> >>>> checking for grep that handles long lines and -e... /bin/grep
> >>>> checking for egrep... /bin/grep -E
> >>>> checking for ANSI C header files... yes
> >>>> checking for sys/types.h... yes
> >>>> checking for sys/stat.h... yes
> >>>> checking for stdlib.h... yes
> >>>> checking for string.h... yes
> >>>> checking for memory.h... yes
> >>>> checking for strings.h... yes
> >>>> checking for inttypes.h... yes
> >>>> checking for stdint.h... yes
> >>>> checking for unistd.h... yes
> >>>> checking minix/config.h usability... no
> >>>> checking minix/config.h presence... no
> >>>> checking for minix/config.h... no
> >>>> checking whether it is safe to define __EXTENSIONS__... yes
> >>>> checking for gcc... (cached) gcc
> >>>> checking whether we are using the GNU C compiler... (cached) yes
> >>>> checking whether gcc accepts -g... (cached) yes
> >>>> checking for gcc option to accept ISO C89... (cached) none needed
> >>>> checking for Darwin... no
> >>>> checking for *BSD... no
> >>>> checking for gcc... (cached) gcc
> >>>> checking whether we are using the GNU C compiler... (cached) yes
> >>>> checking whether gcc accepts -g... (cached) yes
> >>>> checking for gcc option to accept ISO C89... (cached) none needed
> >>>> checking threads... yes
> >>>> checking for sdl... no
> >>>> checking for libjpeg-turbo... skipping
> >>>> checking for libjpeg-mmx... skipping
> >>>> checking for jpeg_set_defaults in -ljpeg... yes
> >>>> ./configure: line 5287: syntax error near unexpected token `FFMPEG,'
> >>>> ./configure: line 5287: ` PKG_CHECK_MODULES(FFMPEG, libavutil
> >>>> libavformat libavcodec libswscale, HAVE_FFMPEG=yes)'
> >>>>
> >>>> A syntax error makes me think something is broken somewhere but I'm
> not
> >>>> sure whether I've caused the problem?
> >>>>
> >>>> Cheers, Dave
> >>>>
> >>>>
> >>>> On Fri, 2015-09-18 at 09:15 +0300, ?ydr?nas Urbonas wrote:
> >>>>> Hey, try compiling latest Mr-Dave fork, it contains a fix for
> >>>>> C910/C920 cameras
> >>>>> https://github.com/Mr-Dave/motion/commits/unstable
> >>>>>
> >>>>>
> >>>>> On Thu, Sep 17, 2015 at 9:03 PM, Dave Howorth <[email protected]>
> >>>>> wrote:
> >>>>> Hello,
> >>>>> I'm trying to set up motion with a Logitech HD Pro
> >>>>> Webcam C920
> >>>>> connected
> >>>>> to a Raspberry PI. It sort of works but not properly so I'd
> >>>>> appreciate
> >>>>> some pointers.
> >>>>> The Pi has raspberrypi 3.2.27+ #250 PREEMPT
> >>>>> motion is Version 3.2.12
> >>>>> I'm sshed to the pi; there's no display on it. I
> >>>>> have motion
> >>>>> set up as a
> >>>>> service started on boot.
> >>>>> I have two issues that I'd like to resolve:
> >>>>> (1) motion happily captures video when
> >>>>> there is motion and
> >>>>> records an
> >>>>> avi file and a bunch of jpegs. But it only does this if I
> >>>>> leave the
> >>>>> width and height at their default. If I set 1280 x 720 or
> 1920
> >>>>> x
> >>>>> 1080 resolution, nothing gets captured.
> >>>>> I have tried running cheese and that is able to
> show
> >>>>> high-resolution
> >>>>> video, so I know its not a hardware problem. There's a lot
> of
> >>>>> stuff
> >>>>> in /var/log/messages but I don't understand it:
> >>>>> Sep 17 18:56:41 raspberrypi motion: [0] Motion
> >>>>> thread 1
> >>>>> restart
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] cap.driver:
> "uvcvideo"
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] cap.card: "HD Pro
> >>>>> Webcam C920"
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] cap.bus_info:
> >>>>> "usb-bcm2708_usb-1.2"
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1]
> >>>>> cap.capabilities=0x04000001
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] - VIDEO_CAPTURE
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] - STREAMING
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] Config palette
> index 8
> >>>>> (YU12)
> >>>>> doesn't work.
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] Supported palettes:
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] 0: YUYV (YUV 4:2:2
> >>>>> (YUYV))
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] 1: H264 (H.264)
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] 2: MJPG (MJPEG)
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] Selected palette
> YUYV
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] Test palette YUYV
> >>>>> (1280x720)
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] Using palette YUYV
> >>>>> (1280x720)
> >>>>> bytesperlines 2560 sizeimage 1843200 colorspace 00000008
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>>>> 0x00980900,
> >>>>> "Brightness", range 0,255
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Brightness",
> >>>>> default -8193,
> >>>>> current 128
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>>>> 0x00980901,
> >>>>> "Contrast", range 0,255
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Contrast",
> >>>>> default 57343,
> >>>>> current 128
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>>>> 0x00980902,
> >>>>> "Saturation", range 0,255
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Saturation",
> >>>>> default 57343,
> >>>>> current 128
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] found control
> >>>>> 0x00980913,
> >>>>> "Gain", range 0,255
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] #011"Gain", default
> >>>>> 57343,
> >>>>> current 0
> >>>>> Sep 17 18:56:41 raspberrypi motion: [1] Resizing
> pre_capture
> >>>>> buffer to 1
> >>>>> items
> >>>>> Sep 17 18:57:03 raspberrypi motion: [1] Resizing
> pre_capture
> >>>>> buffer to 3
> >>>>> items
> >>>>> (2) motion exits if I try to access the
> >>>>> web stream at
> >>>>> http://pi:8081/.
> >>>>> I'm not too concerned about this issue because it's not
> >>>>> something I
> >>>>> intend to use once it all works.
> >>>>> Cheers, Dave
> >>>>>
> ------------------------------------------------------------------------------
> >>>>> Monitor Your Dynamic Infrastructure at Any Scale With
> Datadog!
> >>>>> Get real-time metrics from all of your servers, apps and
> tools
> >>>>> in one place.
> >>>>> SourceForge users - Click here to start your Free Trial of
> >>>>> Datadog now!
> >>>>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> >>>>> _______________________________________________
> >>>>> Motion-user mailing list
> >>>>> [email protected]
> >>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >>>>>
> >>>>>
> >>>>
> >>>>
> ------------------------------------------------------------------------------
> >>>>
> >>>> _______________________________________________
> >>>> Motion-user mailing list
> >>>> [email protected]
> >>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >>
> >>
> ------------------------------------------------------------------------------
> >> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> >> Get real-time metrics from all of your servers, apps and tools
> >> in one place.
> >> SourceForge users - Click here to start your Free Trial of Datadog now!
> >> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> >> _______________________________________________
> >> Motion-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/motion-user
> >> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >
> >
> >
> ------------------------------------------------------------------------------
> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> > Get real-time metrics from all of your servers, apps and tools
> > in one place.
> > SourceForge users - Click here to start your Free Trial of Datadog now!
> > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> > _______________________________________________
> > Motion-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 24 Sep 2015 07:08:55 +0300
> From: tosiara <[email protected]>
> Subject: Re: [Motion-user] RTSP cant be opened in motion. Why?
> To: Motion discussion list <[email protected]>
> Message-ID:
> <CACHTdwQThG40Ubw2bXOx2UuF-5x=
> [email protected]>
> Content-Type: text/plain; charset="utf-8"
>
> [0] [ALR] [ALL] conf_cmdparse: Unknown config option "rtsp_uses_tcp"
>
> What version have you compiled? looks like you did that without rtsp
> support
> Take fresh Mr_Dave master branch and re-compile
>
> On Wed, Sep 23, 2015 at 9:56 PM, Mariusz Ciszewski <
> [email protected]> wrote:
>
> > > Nobody knows why.
> > > Unless you show any detailed logs
> >
> > root@raspberrypi:~# motion
> > [0] [NTC] [ALL] conf_load: Processing thread 0 - config file
> > /etc/motion/motion.conf
> > [0] [ALR] [ALL] conf_cmdparse: Unknown config option "rtsp_uses_tcp"
> > [0] [NTC] [ALL] config_thread: Processing config file
> /etc/motion/test.conf
> > [0] [NTC] [ALL] motion_startup: Motion 3.2.12+git20140228 Started
> > [0] [NTC] [ALL] motion_startup: Logging to syslog
> > [0] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
> > [0] [NTC] [ENC] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD 3670016
> > LIBAVFORMAT_BUILD 3670272
> > [0] [NTC] [ALL] main: Motion running in setup mode.
> > [0] [NTC] [ALL] main: Thread 1 is from /etc/motion/test.conf
> > [0] [NTC] [ALL] main: Thread 1 is device: rtsp://
> 192.168.1.4:554/live.sdp
> > input -1
> > [0] [NTC] [ALL] main: Stream port 8004
> > [0] [NTC] [ALL] main: Waiting for threads to finish, pid: 15583
> > [0] [NTC] [STR] httpd_run: motion-httpd testing : IPV4 addr: 0.0.0.0
> port:
> > 8000
> > [0] [NTC] [STR] httpd_run: motion-httpd Bound : IPV4 addr: 0.0.0.0 port:
> > 8000
> > [1] [NTC] [ALL] motion_init: Thread 1 started , motion detection Enabled
> > [0] [NTC] [STR] httpd_run: motion-httpd/3.2.12+git20140228 running,
> > accepting connections
> > [0] [NTC] [STR] httpd_run: motion-httpd: waiting for data on 0.0.0.0 port
> > TCP 8000
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > [1] [WRN] [ALL] motion_init: Could not fetch initial image from camera
> > Motion continues using width and height from config file(s)
> > [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1 items
> > [1] [NTC] [STR] http_bindsock: motion-stream testing : IPV4 addr: 0.0.0.0
> > port: 8004
> > [1] [NTC] [STR] http_bindsock: motion-stream Bound : IPV4 addr: 0.0.0.0
> > port: 8004
> > [1] [NTC] [ALL] motion_init: Started motion-stream server in port 8004
> > auth Disabled
> > [1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 2 items
> > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > camera
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > camera
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > camera
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > [1] [NTC] [ALL] motion_loop: Video signal lost - Adding grey image
> > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > camera
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > camera
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > [1] [WRN] [ALL] motion_loop: Retrying until successful connection with
> > camera
> > [1] [ALR] [NET] netcam_start: Network Camera thread starting... for url
> > (rtsp://192.168.1.4:554/live.sdp)
> > [1] [CRT] [NET] netcam_start: Invalid netcam_url (rtsp://
> > 192.168.1.4:554/live.sdp)
> > ^C[1] [NTC] [ALL] motion_loop: End of event 1
> > [1] [NTC] [ALL] motion_loop: Thread exiting
> > [1] [NTC] [STR] stream_stop: Closing motion-stream listen socket & active
> > motion-stream sockets
> > [1] [NTC] [STR] stream_stop: Closed motion-stream listen socket & active
> > motion-stream sockets
> > [0] [NTC] [ALL] main: Threads finished
> > [0] [NTC] [STR] httpd_run: motion-httpd - Finishing
> > [0] [NTC] [STR] httpd_run: motion-httpd Closing
> > [0] [NTC] [STR] motion_web_control: motion-httpd thread exit
> > [0] [NTC] [ALL] main: Motion terminating
> > root@raspberrypi:~#
> >
> > Please help.
> >
> > 2015-09-23 11:49 GMT+02:00 tosiara <[email protected]>:
> >
> >> Nobody knows why.
> >> Unless you show any detailed logs
> >>
> >> On Wed, Sep 23, 2015 at 12:42 PM, Mariusz Ciszewski <
> >> [email protected]> wrote:
> >>
> >>> Hello.
> >>>
> >>> This streams work for me in VLC:
> >>> rtsp://192.168.1.4:554/live.sdp
> >>>
> >>> But when I try to set it up inside motion:
> >>> netcam_url rtsp://192.168.1.4:554/live.sdp
> >>>
> >>> i can see only "Unable to open Video device" on gray screen.
> >>>
> >>> User and password is not configured / not needed.
> >>>
> >>> Why this doesn't work?
> >>>
> >>> Motion 3.2.12+git20140228
> >>>
> >>>
> >>>
> >>>
> >>>
> ------------------------------------------------------------------------------
> >>> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> >>> Get real-time metrics from all of your servers, apps and tools
> >>> in one place.
> >>> SourceForge users - Click here to start your Free Trial of Datadog now!
> >>> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> >>> _______________________________________________
> >>> Motion-user mailing list
> >>> [email protected]
> >>> https://lists.sourceforge.net/lists/listinfo/motion-user
> >>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >>>
> >>>
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> >> Get real-time metrics from all of your servers, apps and tools
> >> in one place.
> >> SourceForge users - Click here to start your Free Trial of Datadog now!
> >> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> >> _______________________________________________
> >> Motion-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/motion-user
> >> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >>
> >>
> >
> >
> >
> ------------------------------------------------------------------------------
> > Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> > Get real-time metrics from all of your servers, apps and tools
> > in one place.
> > SourceForge users - Click here to start your Free Trial of Datadog now!
> > http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
> > _______________________________________________
> > Motion-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
>
> ------------------------------------------------------------------------------
> Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
> Get real-time metrics from all of your servers, apps and tools
> in one place.
> SourceForge users - Click here to start your Free Trial of Datadog now!
> http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
>
> ------------------------------
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
>
>
> End of Motion-user Digest, Vol 112, Issue 19
> ********************************************
>
--
Herzlich
Yannick Hagmann
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------------------------------------------------------
Monitor Your Dynamic Infrastructure at Any Scale With Datadog!
Get real-time metrics from all of your servers, apps and tools
in one place.
SourceForge users - Click here to start your Free Trial of Datadog now!
http://pubads.g.doubleclick.net/gampad/clk?id=241902991&iu=/4140
------------------------------
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
End of Motion-user Digest, Vol 112, Issue 20
********************************************
