Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. RTSP Help! Please! (giustinorom...@libero.it)
2. Re: RTSP Help! Please! (folkert)
3. RTSP question (giustinorom...@libero.it)
4. Re: RTSP question (Colin Law)
5. Re: RTSP question (giustinorom...@libero.it)
----------------------------------------------------------------------
Message: 1
Date: Mon, 26 Mar 2018 15:10:15 +0200 (CEST)
From: giustinorom...@libero.it
To: motion-user@lists.sourceforge.net
Subject: [Motion-user] RTSP Help! Please!
Message-ID: <83462926.274889.1522069815...@mail.libero.it>
Content-Type: text/plain; charset="utf-8"
Hi!
I've some trouble with RTSP configuration!
How could I do to ask help?
Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Tue, 27 Mar 2018 10:27:49 +0200
From: folkert <folk...@vanheusden.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] RTSP Help! Please!
Message-ID:
<20180327082749.w55nuxevdgkkf...@belle.intranet.vanheusden.com>
Content-Type: text/plain; charset=us-ascii
Just ask your question.
On Mon, Mar 26, 2018 at 03:10:15PM +0200, giustinoromano--- via Motion-user
wrote:
> Hi!
> I've some trouble with RTSP configuration!
> How could I do to ask help?
> Thanks!
Folkert van Heusden
------------------------------
Message: 3
Date: Tue, 27 Mar 2018 10:51:40 +0200 (CEST)
From: giustinorom...@libero.it
To: motion-user@lists.sourceforge.net
Subject: [Motion-user] RTSP question
Message-ID: <346634880.323239.1522140700...@mail.libero.it>
Content-Type: text/plain; charset="utf-8"
Hi!
I had three small ip cameras, like Foscam, that used this type of url:
http://192.168.1.13:81/videostream.cgi?loginuse=admin&loginpas=admin
http://192.168.1.13:81/videostream.cgi?loginuse=admin&loginpas=admin
inserting this address after "netcam_url", at every motion detection the camera
was recorded.
One of the three cameras, of which I spoke to you earlier, broke down and
replaced it. This new camera is onvif and uses this type of RTSP protocol.
The correct url is of this kind:
rtsp: // admin: admin@192.168.1.20/onvif1
I tried this address on VLC and the camera shows. However, by inserting this in
"netcam_url" on Motion, motion detection is not recorded!
Thank you very much for your response, it was very kind of you.
Giustino Romano
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 4
Date: Tue, 27 Mar 2018 09:57:48 +0100
From: Colin Law <clan...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] RTSP question
Message-ID:
<CAL=0gluguoz2w9erwuvbeseuv1ztyfpqmkeobz2zte4srxu...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
On 27 March 2018 at 09:51, giustinoromano--- via Motion-user <
motion-user@lists.sourceforge.net> wrote:
...
> One of the three cameras, of which I spoke to you earlier, broke down and
> replaced it. This new camera is onvif and uses this type of RTSP protocol.
> The correct url is of this kind:
>
> rtsp: // admin: admin@192.168.1.20/onvif1
>
> I tried this address on VLC and the camera shows. However, by inserting
> this in "netcam_url" on Motion, motion detection is not recorded!
>
> Thank you very much for your response, it was very kind of you.
>
Firstly you don't want all those spaces in the url, and I have found that
it works if you use netcam_userpass for specifying the credentials, so
something like
netcam_url rtsp://192.168.1.20/onvif1 <http://admin@192.168.1.20/onvif1>
netcam_userpass admin:admin
Colin
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 5
Date: Tue, 27 Mar 2018 11:22:23 +0200 (CEST)
From: giustinorom...@libero.it
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] RTSP question
Message-ID: <395941522.335954.1522142543...@mail.libero.it>
Content-Type: text/plain; charset="utf-8"
Colin,
It works now! Thanks! But the registration appears as in the attached
screenshot. It's all gray.
First, however, he could not even regist. We took one more step!
Thank you!
> Il 27 marzo 2018 alle 10.57 Colin Law <clan...@gmail.com> ha scritto:
>
> On 27 March 2018 at 09:51, giustinoromano--- via Motion-user
> <motion-user@lists.sourceforge.net mailto:motion-user@lists.sourceforge.net >
> wrote:
> ...
>
> > >
> > One of the three cameras, of which I spoke to you earlier, broke
> > down and replaced it. This new camera is onvif and uses this type of RTSP
> > protocol.
> > The correct url is of this kind:
> >
> > rtsp: // admin:http://admin@192.168.1.20/onvif1
> >
> > I tried this address on VLC and the camera shows. However, by
> > inserting this in "netcam_url" on Motion, motion detection is not recorded!
> >
> > Thank you very much for your response, it was very kind of you.
> >
> > > Firstly you don't want all those spaces in the url, and I have
> > found that it works if you use netcam_userpass for specifying the
> > credentials, so something like
> netcam_url rtsp:// 192.168.1.20/onvif1 http://admin@192.168.1.20/onvif1
> netcam_userpass admin:admin
>
> Colin
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org!
> http://sdm.link/slashdot_______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Cattura.PNG
Type: image/png
Size: 165676 bytes
Desc: not available
------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 141, Issue 21
********************************************
