Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: newbie problems (greg thomas)
----------------------------------------------------------------------
Message: 1
Date: Wed, 12 Jun 2019 18:44:55 +1000
From: greg thomas <geete...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] newbie problems
Message-ID:
<CAGe5y2fivvM9FN2BE7K=lbjylrpsv2ano7jjyk2por0fnqm...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I've also found issues where if you set the quality to 100% via the
motioneye interface that the video contains garbage. Setting the video
quality to 95/98% resolves this issue, not sure if it's a motion issue, or
how motioneye is setting the quality parameters, but it's definitely an
issue.
Greg
On Wed, 12 Jun 2019, 6:09 PM tosiara, <tosi...@gmail.com> wrote:
> If all of your recorded videos contained "garbage" and because of that
> motion was triggered - then it is a common issue of using UDP
> protocol. Network packet loss are causing this. The only reliable
> solution is to use TCP portocol
>
> On Tue, Jun 11, 2019 at 11:10 PM vector457 <vector...@gmail.com> wrote:
> >
> > I seem to be getting a lot of very short motion detected videos and lots
> of these errors in the log overnight. Funny thing was last night when I
> first got it working, for an hour or so whilst playing with it(testing
> motion detect) I never saw even one of these.
> >
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:00:02] ffmpeg_avcodec_log: Too
> short data for FU-A H.264 RTP packet
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:00:51] ffmpeg_avcodec_log:
> corrupted macroblock 55 27 (total_coeff=-1)
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:00:51] ffmpeg_avcodec_log: error
> while decoding MB 55 27
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:00:53] ffmpeg_avcodec_log: Too
> short data for FU-A H.264 RTP packet
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:01:23] ffmpeg_avcodec_log: Too
> short data for FU-A H.264 RTP packet
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:02:17] ffmpeg_avcodec_log: Too
> short data for FU-A H.264 RTP packet
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:02:21] ffmpeg_avcodec_log: Invalid
> UE golomb code
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:02:21] ffmpeg_avcodec_log: cbp too
> large (3199971767) at 48 27
> > [4:nc4:MyCam2] [INF] [ENC] [Jun 12 06:02:21] ffmpeg_avcodec_log: error
> while decoding MB 48 27
> > [2:ml2:MyCam2] [INF] [EVT] [Jun 12 06:03:49] event_new_video: Source FPS
> 15
> >
> > On 11/6/19 7:18 pm, tosiara wrote:
> >
> > Your camera does not support TCP transport. Change your config to:
> > netcam_use_tcp off
> >
> > On Tue, Jun 11, 2019 at 12:11 PM vector457 <vector...@gmail.com> wrote:
> >
> > thanks please find attached..looks like a "transport" error?
> >
> > On 11/6/19 5:17 pm, tosiara wrote:
> >
> > Please provide full log with -d 7 command line switch
> >
> > On Mon, Jun 10, 2019 at 11:03 PM vector457 <vector...@gmail.com> wrote:
> >
> > thanks for reply.
> > Strange. This morning i tried locahost:8080 and cam1 appeared so that
> seems to be working now. Not sure why it wasnt last night. What was
> interesting last night when it wasnt was that the Camera list was the
> default Camera1 and not what I had renamed it too, as if localhost wasnt
> using the conf file info. This morning its indeed using the renamed
> cameras. Browser cache problem? Even tho I tried a number of refresh.
> > Browser running from the same machine as motion is.
> >
> > tried ffplay rtsp://user:pswd@10.0.0.90/onvif1, worked as expected.
> > tried restarting motion same problem
> >
> > [2:ml2:MyCam2] [NTC] [ALL] motion_loop: Thread exiting
> > [0:motion] [NTC] [ALL] main: Motion thread 2 restart
> > [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 102 is from
> /etc/motion/camera2.conf
> > [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 102 Camera Name:
> MyCam2 Service: rtsp:
> > [2:ml2:MyCam2] [NTC] [ALL] motion_init: Camera 102 started: motion
> detection Enabled
> > [2:ml2:MyCam2] [NTC] [VID] vid_start: Opening Netcam RTSP
> > [2:ml2:MyCam2] [ERR] [NET] netcam_rtsp_open_context: Normal resolution:
> Unable to open camera(MyCam2): Invalid data found when processing input
> > [2:ml2:MyCam2] [NTC] [NET] netcam_rtsp_cleanup: Normal resolution: Shut
> down complete.
> > [2:ml2:MyCam2] [ERR] [VID] vid_start: Netcam RTSP failed to open
> > [2:ml2:MyCam2] [WRN] [ALL] motion_init: Could not fetch initial image
> from camera
> >
> >
> > On 11/6/19 12:44 am, tosiara wrote:
> >
> > 1. You can't see the stream, probably, because you are trying from
> > another machine?
> > Try to set "stream_localhost off". Will that work?
> > I wonder how does it "say no cameras running"? Provide either log or
> > screenshot of the message
> >
> > 2. What URL is used for camera? Please provide the full log
> >
> > Do not use VLC for verification. Always test with "ffplay"
> >
> > On Mon, Jun 10, 2019 at 11:48 AM vector457 <vector...@gmail.com> wrote:
> >
> > Hi all,
> >
> > installed motion on Ubuntu18
> >
> > I can see both of my two network cameras using VLC. they are old cams
> but working.
> >
> > I have attached copy of motion.conf
> >
> > rtsp://user:password@10.0.0.78/11 {tenvis 1p391w or similar(no further
> info)camera}
> >
> > rtsp://user:password@10.0.0.90/onvif1 {sricam SP007 or similar(no
> further info on it)camera}
> >
> > I used camera1-dist.conf file for both, modifying name ,id and netcam url
> >
> > to create camera1.conf and camera2.conf.
> >
> > Problem 1 no local host view.
> >
> > I ran,mark@fatcat:~$ motion
> >
> > [0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file
> /etc/motion/motion.conf
> > [0:motion] [NTC] [ALL] config_camera: Processing camera config file
> /etc/motion/camera1.conf
> > [0:motion] [NTC] [ALL] motion_startup: Logging to syslog
> > [0:motion] [NTC] [ALL] motion_startup: Motion 4.2.2 Started
> > [0:motion] [NTC] [ALL] motion_startup: Using default log type (ALL)
> > [0:motion] [NTC] [ALL] motion_startup: Using log type (ALL) log level
> (NTC)
> > [0:motion] [NTC] [STR] webu_start_strm: Starting all camera streams on
> port 8081
> > [0:motion] [NTC] [STR] webu_start_strm: Unable to start stream for
> camera 0
> > [0:motion] [NTC] [STR] webu_start_ctrl: Starting webcontrol on port 8080
> > [0:motion] [NTC] [STR] webu_start_ctrl: Unable to start MHD
> > [0:motion] [NTC] [ENC] ffmpeg_global_init: ffmpeg libavcodec version
> 57.107.100 libavformat version 57.83.100
> > [0:motion] [NTC] [ALL] translate_init: Language: English
> > [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 101 is from
> /etc/motion/camera1.conf
> > [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 101 Camera Name:
> MyCam1 Service: rtsp:
> > [0:motion] [NTC] [ALL] main: Waiting for threads to finish, pid: 21036
> > [1:ml1:MyCam1] [NTC] [ALL] motion_init: Camera 101 started: motion
> detection Enabled
> > [1:ml1:MyCam1] [NTC] [VID] vid_start: Opening Netcam RTSP
> > [1:ml1:MyCam1] [NTC] [NET] netcam_rtsp_connect: Normal resolution:
> Camera (MyCam1) connected
> > [1:ml1:MyCam1] [NTC] [ALL] image_ring_resize: Resizing pre_capture
> buffer to 1 items
> > [2:nc2:MyCam1] [NTC] [NET] netcam_rtsp_handler: Normal resolution:
> Camera handler thread [2] started
> > [2:nc2:MyCam1] [NTC] [NET] netcam_rtsp_connect: Normal resolution:
> Camera (MyCam1) connected
> > [1:ml1:MyCam1] [NTC] [ALL] image_ring_resize: Resizing pre_capture
> buffer to 4 items
> > [1:ml1:MyCam1] [NTC] [EVT] event_newfile: File of type 8 saved to:
> ./CAM01_101-01-20190610181942.mkv
> >
> > The mkv is indeed in my local dir and is capturing images as expected.
> But yet when I go to web browser(firefox) localhost:8080 it says no cameras
> running. I expected to see a live view?
> >
> > Problem 2
> >
> > camera 2 the onvif1 errors with
> >
> > Unable to open camera(MyCam2): Invalid data found when processing input
> > not sure why its works from this url in VLC.
> >
> >
> > thoughts?
> >
> > _______________________________________________
> > Motion-user mailing list
> > Motion-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> > _______________________________________________
> > Motion-user mailing list
> > Motion-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> >
> > _______________________________________________
> > Motion-user mailing list
> > Motion-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> > _______________________________________________
> > Motion-user mailing list
> > Motion-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> > _______________________________________________
> > Motion-user mailing list
> > Motion-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> >
> > _______________________________________________
> > Motion-user mailing list
> > Motion-user@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 156, Issue 27
********************************************
