Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: help (Ondra)
----------------------------------------------------------------------
Message: 1
Date: Tue, 3 Sep 2019 12:53:56 +0200
From: Ondra <speed4a...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] help
Message-ID:
<cap2mlmeo27dtsww_btw7hivhbr9c_w988hc0rga-nkfbmdw...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hello,
I have got another problem when motion -c /etc/motion/motion.conf it will
happen that one camera is ok RECORDING but second camera is idle(on start
of this command only iluminate for few seconds).
*Here is motion.conf*
# Rename this distribution example file to motion.conf
#
# This config file was generated by motion 4.0
############################################################
# Daemon
############################################################
# Start in daemon (background) mode and release terminal (default: off)
daemon off
# File to store the process ID, also called pid file. (default: not defined)
process_id_file /var/run/motion/motion.pid
############################################################
# Basic Setup Mode
############################################################
# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off
# Use a file to save logs messages, if not defined stderr and syslog is
used. (default: not defined)
logfile /var/log/motion/motion.log
# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG,
ALL). (default: 6 / NTC)
log_level 9
# Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID,
ALL). (default: ALL)
log_type all
###########################################################
# Capture device options
############################################################
# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video1
videodevice /dev/video0
# v4l2_palette allows one to choose preferable palette to be use by motion
# to capture from those supported by your videodevice. (default: 17)
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0 'S910'
# V4L2_PIX_FMT_SBGGR16 : 1 'BYR2'
# V4L2_PIX_FMT_SBGGR8 : 2 'BA81'
# V4L2_PIX_FMT_SPCA561 : 3 'S561'
# V4L2_PIX_FMT_SGBRG8 : 4 'GBRG'
# V4L2_PIX_FMT_SGRBG8 : 5 'GRBG'
# V4L2_PIX_FMT_PAC207 : 6 'P207'
# V4L2_PIX_FMT_PJPG : 7 'PJPG'
# V4L2_PIX_FMT_MJPEG : 8 'MJPEG'
# V4L2_PIX_FMT_JPEG : 9 'JPEG'
# V4L2_PIX_FMT_RGB24 : 10 'RGB3'
# V4L2_PIX_FMT_SPCA501 : 11 'S501'
# V4L2_PIX_FMT_SPCA505 : 12 'S505'
# V4L2_PIX_FMT_SPCA508 : 13 'S508'
# V4L2_PIX_FMT_UYVY : 14 'UYVY'
# V4L2_PIX_FMT_YUYV : 15 'YUYV'
# V4L2_PIX_FMT_YUV422P : 16 '422P'
# V4L2_PIX_FMT_YUV420 : 17 'YU12'
#
v4l2_palette 17
# Tuner device to be used for capturing using tuner as source (default
/dev/tuner0)
# This is ONLY used for FreeBSD. Leave it commented out for Linux
; tunerdevice /dev/tuner0
# The video input to be used (default: -1)
# Should normally be set to 0 or 1 for video/TV cards, and -1 for USB
cameras
# Set to 0 for uvideo(4) on OpenBSD
input -1
# The video norm to use (only for video capture and TV tuner cards)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0
(PAL)
norm 1
# The frequency to set the tuner to (kHz) (only for TV tuner cards)
(default: 0)
frequency 0
# Override the power line frequency for the webcam. (normally not necessary)
# Values:
# -1 : Do not modify device setting
# 0 : Power line frequency Disabled
# 1 : 50hz
# 2 : 60hz
# 3 : Auto
power_line_frequency -1
# Rotate image this number of degrees. The rotation affects all saved
images as
# well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0
# Image width (pixels). Valid range: Camera dependent, default: 352
width 320
# Image height (pixels). Valid range: Camera dependent, default: 288
height 240
# Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit).
framerate 2
# Minimum time in seconds between capturing picture frames from the camera.
# Default: 0 = disabled - the capture rate is given by the camera framerate.
# This option is used when you want to capture images at a rate lower than
2 per second.
minimum_frame_time 0
# URL to use if you are using a network camera, size will be autodetected
(incl http:// ftp:// mjpg:// rtsp:// mjpeg:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. A
trailing slash may be required for some cameras.
# Default: Not defined
; netcam_url value
# Username and password for network camera (only if required). Default: not
defined
# Syntax is user:password
; netcam_userpass value
# The setting for keep-alive of network socket, should improve performance
on compatible net cameras.
# off: The historical implementation using HTTP/1.0, closing the socket
after each http request.
# force: Use HTTP/1.0 requests with keep alive header to reuse the same
connection.
# on: Use HTTP/1.1 requests that support keep alive as default.
# Default: off
netcam_keepalive off
# URL to use for a netcam proxy server, if required, e.g. "http://myproxy";.
# If a port number other than 80 is needed, use "http://myproxy:1234";.
# Default: not defined
; netcam_proxy value
# Set less strict jpeg checks for network cameras with a poor/buggy
firmware.
# Default: off
netcam_tolerant_check off
# RTSP connection uses TCP to communicate to the camera. Can prevent image
corruption.
# Default: on
rtsp_uses_tcp on
# Name of camera to use if you are using a camera accessed through
OpenMax/MMAL
# Default: Not defined
; mmalcam_name vc.ril.camera
# Camera control parameters (see raspivid/raspistill tool documentation)
# Default: Not defined
; mmalcam_control_params -hf
# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target
value.
# If brightness is zero auto_brightness will adjust to average brightness
value 128.
# Only recommended for cameras without auto brightness
auto_brightness off
# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness
level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 0
# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 0
# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 0
# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0
############################################################
# Round Robin (multiple inputs on same video device name)
############################################################
# Number of frames to capture in each roundrobin step (default: 1)
roundrobin_frames 1
# Number of frames to skip before each roundrobin step (default: 1)
roundrobin_skip 1
# Try to filter out noise generated by roundrobin (default: off)
switchfilter off
############################################################
# Motion Detection Settings:
############################################################
# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 3000
# Automatically tune the threshold down if possible (default: off)
threshold_tune on
# Noise threshold for the motion detection (default: 32)
noise_level 32
# Automatically tune the noise threshold (default: on)
noise_tune off
# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not
defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d,
and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
despeckle_filter EedDl
# Detect motion in predefined areas (1 - 9). Areas are numbered like that:
1 2 3
# A script (on_area_detected) is started immediately when motion is
4 5 6
# detected in one of the given areas, but only once during an event.
7 8 9
# One or more areas can be specified with this option. Take care: This
option
# does NOT restrict detection to these areas! (Default: not defined)
; area_detect value
# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value
# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
#smart_mask_speed 0
# Ignore sudden massive light intensity changes given as a percentage of
the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 0
# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 1
# Specifies the number of pre-captured (buffered) pictures from before
motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video
frames and
# cause unsmooth movies. To smooth movies use larger values of post_capture
instead.
pre_capture 0
# Number of frames to capture after motion is no longer detected (default:
0)
post_capture 0
# Event Gap is the seconds of no motion detection that triggers the end of
an event.
# An event is defined as a series of motion images taken within a short
timeframe.
# Recommended value is 60 seconds (Default). The value -1 is allowed and
disables
# events causing all Motion to be written to one single movie file and no
pre_capture.
# If set to 0, motion is running in gapless mode. Movies don't have gaps
anymore. An
# event ends right after no more motion is detected and post_capture is
over.
event_gap 60
# Maximum length in seconds of a movie
# When value is exceeded a new movie file is created. (Default: 0 =
infinite)
max_movie_time 0
# Always save images even if there was no motion (default: off)
emulate_motion off
############################################################
# Image File Output
############################################################
# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to
'center'.
# Can be used as preview shot for the corresponding movie.
output_pictures off
# Output pictures with only the pixels moving object (ghost images)
(default: off)
output_debug_pictures off
# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 75
# Type of output images
# Valid values: jpeg, ppm (default: jpeg)
picture_type jpeg
############################################################
# FFMPEG related options
# Film (movies) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################
# Use ffmpeg to encode movies in realtime (default: off)
ffmpeg_output_movies on
# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_output_debug_movies off
# Use ffmpeg to encode a timelapse movie
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0
# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday,
monthly, manual
ffmpeg_timelapse_mode daily
# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 400000
# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 1 - 100 where 1 means worst quality and 100 is best.
ffmpeg_variable_bitrate 0
# Codec to used by ffmpeg for the video compression.
# Timelapse videos have two options.
# mpg - Creates mpg file with mpeg-2 encoding.
# If motion is shutdown and restarted, new pics will be appended
# to any previously created file with name indicated for timelapse.
# mpeg4 - Creates avi file with the default encoding.
# If motion is shutdown and restarted, new pics will create a
# new file with the name indicated for timelapse.
# Supported formats are:
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding
# mov - QuickTime
# mp4 - MPEG-4 Part 14 H264 encoding
# mkv - Matroska H264 encoding
# hevc - H.265 / HEVC (High Efficiency Video Coding)
ffmpeg_video_codec mpeg4
# When creating videos, should frames be duplicated in order
# to keep up with the requested frames per second
# (default: true)
ffmpeg_duplicate_frames true
############################################################
# SDL Window
############################################################
# Number of motion thread to show in SDL Window (default: 0 = disabled)
#sdl_threadnr 0
############################################################
# External pipe to video encoder
# Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
#############################################################
# Bool to enable or disable extpipe (default: off)
use_extpipe off
# External program (full path and opts) to pipe raw video to
# Generally, use '-' for STDIN...
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:i420 -ovc x264
-x264encopts
bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me
-vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
;extpipe x264 - --input-res %wx%h --fps %fps --bitrate 2000 --preset
ultrafast --quiet -o %f.mp4
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:fps=%fps -ovc x264
-x264encopts preset=ultrafast -of lavf -o %f.mp4 - -fps %fps
;extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h
-framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 %f.mp4
############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################
# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0
############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################
# Locate and draw a box around the moving object.
# Valid values: on, off, preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate_motion_mode off
# Set the look and style of the locate box if enabled.
# Valid values: box, redbox, cross, redcross (default: box)
# Set to 'box' will draw the traditional box.
# Set to 'redbox' will draw a red box.
# Set to 'cross' will draw a little cross to mark center.
# Set to 'redcross' will draw a little red cross to mark center.
locate_motion_style box
# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q
# Draw a user defined text on the images using same options as C function
strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left CAMERA %t
# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion
settings
# Text is placed in upper right corner
text_changes off
# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and
time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S
# Draw characters at twice normal size on images. (default: off)
text_double off
# Text to include in a JPEG EXIF comment
# May be any text, including conversion specifiers.
# The EXIF timestamp is included independent of this text.
;exif_text %i%J/%K%L
############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, picture_, movie_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################
# Target base directory for pictures and films
# Recommended to use absolute path. (Default: current working directory)
target_dir /var/lib/motion
# File path for snapshots (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-snapshot
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will
always
# point to the latest snapshot, unless snapshot_filename is exactly
'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot
# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
picture_filename %v-%Y%m%d%H%M%S-%q
# File path for motion triggered ffmpeg films (movies) relative to
target_dir
# Default: %v-%Y%m%d%H%M%S
# File extensions(.mpg .avi) are automatically added so do not include them
movie_filename %v-%Y%m%d%H%M%S
# File path for timelapse movies relative to target_dir
# Default: %Y%m%d-timelapse
# File extensions(.mpg .avi) are automatically added so do not include them
timelapse_filename %Y%m%d-timelapse
############################################################
# Global Network Options
############################################################
# Enable IPv6 (default: off)
ipv6_enabled off
############################################################
# Live Stream Server
############################################################
# The mini-http server listens to this port for requests (default: 0 =
disabled)
stream_port 8081
# Quality of the jpeg (in percent) images produced (default: 50)
stream_quality 50
# Output frames at 1 fps when no motion is detected and increase to the
# rate given by stream_maxrate when motion is detected (default: off)
stream_motion off
# Maximum framerate for stream streams (default: 1)
stream_maxrate 1
# Restrict stream connections to localhost only (default: on)
stream_localhost on
# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual stream rate by desired number
of seconds
# Actual stream rate is the smallest of the numbers framerate and
stream_maxrate
stream_limit 0
# Set the authentication method (default: 0)
# 0 = disabled
# 1 = Basic authentication
# 2 = MD5 digest (the safer authentication)
stream_auth_method 0
# Authentication for the stream. Syntax username:password
# Default: not defined (Disabled)
; stream_authentication username:password
# Percentage to scale the stream image for preview
# Default: 25
; stream_preview_scale 25
# Have stream preview image start on a new line
# Default: no
; stream_preview_newline no
############################################################
# HTTP Based Control
############################################################
# TCP/IP port for the http server to listen on (default: 0 = disabled)
webcontrol_port 8080
# Restrict control connections to localhost only (default: on)
webcontrol_localhost on
# Output for http server, select off to choose raw text plain (default: on)
webcontrol_html_output on
# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
; webcontrol_authentication username:password
############################################################
# Tracking (Pan/Tilt)
#############################################################
# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic,
5=uvcvideo, 6=servo)
# The generic type enables the definition of motion center and motion size
to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0
# Enable auto tracking (default: off)
track_auto off
# Serial port of motor (default: none)
;track_port /dev/ttyS0
# Motor number for x-axis (default: 0)
;track_motorx 0
# Set motorx reverse (default: 0)
;track_motorx_reverse 0
# Motor number for y-axis (default: 0)
;track_motory 1
# Set motory reverse (default: 0)
;track_motory_reverse 0
# Maximum value on x-axis (default: 0)
;track_maxx 200
# Minimum value on x-axis (default: 0)
;track_minx 50
# Maximum value on y-axis (default: 0)
;track_maxy 200
# Minimum value on y-axis (default: 0)
;track_miny 50
# Center value on x-axis (default: 0)
;track_homex 128
# Center value on y-axis (default: 0)
;track_homey 128
# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0
# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10
# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10
# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10
# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255
# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40
############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################
# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet on
# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion
defined by event_gap
; on_event_start value
# Command to be executed when an event ends after a period of no motion
# (default: none). The period of no motion is defined by option event_gap.
; on_event_end value
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# To give the filename as an argument to a command append it with %f
; on_picture_save value
# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value
# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'. (default: none)
; on_area_detected value
# Command to be executed when a movie file (.mpg|.avi) is created.
(default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value
# Command to be executed when a movie file (.mpg|.avi) is closed. (default:
none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value
# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion don't detect a lost camera!
# It depends on the driver, some drivers dosn't detect a lost camera at all
# Some hangs the motion thread. Some even hangs the PC! (default: none)
; on_camera_lost value
#####################################################################
# Common Options for database features.
# Options require database options to be active also.
#####################################################################
# Log to the database when creating motion triggered picture file
(default: on)
; sql_log_picture on
# Log to the database when creating a snapshot image file (default: on)
; sql_log_snapshot on
# Log to the database when creating motion triggered movie file (default:
off)
; sql_log_movie off
# Log to the database when creating timelapse movies file (default: off)
; sql_log_timelapse off
# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# Create tables :
##
# Mysql
# CREATE TABLE security (camera int, filename char(80) not null, frame int,
file_type int, time_stamp timestamp(14), event_time_stamp timestamp(14));
#
# Postgresql
# CREATE TABLE security (camera int, filename char(80) not null, frame int,
file_type int, time_stamp timestamp without time zone, event_time_stamp
timestamp without time zone);
#
# insert into security(camera, filename, frame, file_type, time_stamp,
text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
; sql_query insert into security(camera, filename, frame, file_type,
time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T',
'%C')
############################################################
# Database Options
############################################################
# database type : mysql, postgresql, sqlite3 (default : not defined)
; database_type value
# database to log to (default: not defined)
# for sqlite3, the full path and name for the database.
; database_dbname value
# The host on which the database is located (default: localhost)
; database_host value
# User account name for database (default: not defined)
; database_user value
# User password for database (default: not defined)
; database_password value
# Port on which the database is located
# mysql 3306 , postgresql 5432 (default: not defined)
; database_port value
# Database wait time in milliseconds for locked database to
# be unlocked before returning database locked error (default 0)
; database_busy_timeout 0
############################################################
# Video Loopback Device (vloopback project)
############################################################
# Output images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; video_pipe value
# Output motion images to a video4linux loopback device
# The value '-' means next available (default: not defined)
; motion_video_pipe value
##############################################################
# camera config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one camera
# config file for each camera in addition to this config file.
##############################################################
# Remember: If you have more than one camera you must have one
# camera file for each camera. E.g. 2 cameras requires 3 files:
# This motion.conf file AND camera1.conf and camera2.conf.
# Only put the options that are unique to each camera in the
# camera config files.
camera /etc/motion/camera1.conf
camera /etc/motion/camera2.conf
; camera /etc/motion/camera3.conf
; camera /etc/motion/camera4.conf
##############################################################
# Camera config directory - One for each camera.
##############################################################
#
; camera_dir /etc/motion/conf.d
***********************************************************************************************************************************************************
*here is config for camera1:*
# /etc/motion/camera1.conf
#
# This config file was generated by motion 4.0
###########################################################
# Capture device options
############################################################
# Camera Id
# Consistent identification number to assign to each camera across multiple
# invocations of Motion.
# Default: The order when the camera file was read
# camera_id = 1
# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video0
# The video input to be used (default: -1)
# Should normally be set to 1 for video/TV cards, and -1 for USB cameras
input -1
# Draw a user defined text on the images using same options as C function
strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 1
############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, picture_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################
# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
#target_dir /tmp/motion/cam1
# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
picture_filename CAM1_%v-%Y%m%d%H%M%S-%q
############################################################
# Live Stream Server
############################################################
# The mini-http server listens to this port for requests (default: 0 =
disabled)
stream_port 8081
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
#on_picture_save /usr/local/motion-extras/camparse2.pl
# Command to be executed when a movie file (.mpg|.avi) is closed. (default:
none)
# Filename of movie is appended as an argument for the command.
#on_movie_end /usr/local/motion-extras/mpegparse2.pl
********************************************************************************************************************************************
*and config for camera2:*
# /etc/motion/camera2.conf
#
# This config file was generated by motion 4.0
###########################################################
# Capture device options
############################################################
# Camera Id
# Consistent identification number to assign to each camera across multiple
# invocations of Motion.
# Default: The order when the camera file was read
# camera_id = 2
# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video1
# The video input to be used (default: -1)
# Should normally be set to 1 for video/TV cards, and -1 for USB cameras
input -1
# Draw a user defined text on the images using same options as C function
strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
text_left CAMERA 2
############################################################
# Target Directories and filenames For Images And Films
# For the options snapshot_, picture_, mpeg_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################
# Target base directory for pictures and films
# Recommended to use absolute patch. (Default: current working directory)
#target_dir /tmp/motion/cam2
# File path for motion triggered images (jpeg or ppm) relative to target_dir
# Default: %v-%Y%m%d%H%M%S-%q
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
picture_filename CAM2_%v-%Y%m%d%H%M%S-%q
############################################################
# Live Stream Server
############################################################
# The mini-http server listens to this port for requests (default: 0 =
disabled)
stream_port 8082
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none)
# The filename of the picture is appended as an argument for the command.
#on_picture_save /usr/local/motion-extras/camparse2.pl
# Command to be executed when a movie file (.mpg|.avi) is closed. (default:
none)
# Filename of movie is appended as an argument for the command.
#on_movie_end /usr/local/motion-extras/mpegparse2.pl
*************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************************
*and here is motion.log:*
[-792873072:motion] [NTC] [ALL] [Sep 03 10:47:34] motion_startup: Using log
type (ALL) log level (ALL)
[-792873072:motion] [NTC] [ENC] [Sep 03 10:47:34] ffmpeg_init: ffmpeg
libavcodec version 57.48.101 libavformat version 57.41.100
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Camera 1 is from
/etc/motion/camera1.conf
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Camera 1 is device:
/dev/video0 input -1
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Stream port 8081
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Camera 2 is from
/etc/motion/camera2.conf
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Camera 2 is device:
/dev/video1 input -1
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Stream port 8082
[1:ml1] [NTC] [ALL] [Sep 03 10:47:34] motion_init: Camera 1 started: motion
detection Enabled
[0:motion] [NTC] [ALL] [Sep 03 10:47:34] main: Waiting for threads to
finish, pid: 63
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] vid_v4lx_start: Using videodevice
/dev/video0 and input -1
[2:ml2] [NTC] [ALL] [Sep 03 10:47:34] motion_init: Camera 2 started: motion
detection Enabled
[0:web_control] [NTC] [STR] [Sep 03 10:47:34] http_bindsock: listening on
127.0.0.1 port 8080
[0:web_control] [NTC] [STR] [Sep 03 10:47:34] httpd_run: Started
motion-httpd server on port 8080 (auth Disabled)
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_get_capability:
------------------------
cap.driver: "uvcvideo"
cap.card: "Full HD 1080P PC Camera"
cap.bus_info: "usb-0000:00:1d.0-1.1"
cap.capabilities=0x84000001
------------------------
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_get_capability: - VIDEO_CAPTURE
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_get_capability: - STREAMING
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_select_input: name = "Camera 1",
type 0x00000002, status 00000000
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_select_input: - CAMERA
[1:ml1] [WRN] [VID] [Sep 03 10:47:34] v4l2_select_input: Device doesn't
support VIDIOC_G_STD
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: Config palette
index 17 (YU12) doesn't work.
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: Supported
palettes:
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: (0) MJPG (MJPEG)
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: 0 - MJPEG
(compressed : 1) (0x47504a4d)
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: (1) YUYV (YUV
4:2:2 (YUYV))
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: 1 - YUV 4:2:2
(YUYV) (compressed : 0) (0x56595559)
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format Selected palette
YUYV
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_do_set_pix_format: Testing
palette YUYV (320x240)
[1:ml1] [WRN] [VID] [Sep 03 10:47:34] v4l2_do_set_pix_format: Adjusting
resolution from 320x240 to 352x288.
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_do_set_pix_format: Using palette
YUYV (352x288) bytesperlines 704 sizeimage 202752 colorspace 00000000
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980900, "Brightness", range -10,10
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Brightness",
default 2, current -10
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980901, "Contrast", range 1,32
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Contrast",
default 17, current 17
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980902, "Saturation", range 0,32
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Saturation",
default 17, current 17
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980903, "Hue", range -5,5
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Hue", default 0,
current 0
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980918, "Power Line Frequency", range 0,2
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Power Line
Frequency", default 2, current 2
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980910, "Gamma", range 100,200
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Gamma", default
150, current 150
[1:ml1] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: mmap information:
frames=4
[1:ml1] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 0 length=202752
Address (14e5f000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 1 length=202752
Address (14e2d000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 2 length=202752
Address (14dfb000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 3 length=202752
Address (14dc9000)
[1:ml1] [NTC] [VID] [Sep 03 10:47:34] vid_v4lx_start: Using V4L2
[1:ml1] [NTC] [ALL] [Sep 03 10:47:34] image_ring_resize: Resizing
pre_capture buffer to 1 items
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] vid_v4lx_start: Using videodevice
/dev/video1 and input -1
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_get_capability:
------------------------
cap.driver: "uvcvideo"
cap.card: "Full HD 1080P PC Camera"
cap.bus_info: "usb-0000:00:1d.0-1.2"
cap.capabilities=0x84000001
------------------------
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_get_capability: - VIDEO_CAPTURE
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_get_capability: - STREAMING
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_select_input: name = "Camera 1",
type 0x00000002, status 00000000
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_select_input: - CAMERA
[2:ml2] [WRN] [VID] [Sep 03 10:47:34] v4l2_select_input: Device doesn't
support VIDIOC_G_STD
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: Config palette
index 17 (YU12) doesn't work.
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: Supported
palettes:
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: (0) MJPG (MJPEG)
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: 0 - MJPEG
(compressed : 1) (0x47504a4d)
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: (1) YUYV (YUV
4:2:2 (YUYV))
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format: 1 - YUV 4:2:2
(YUYV) (compressed : 0) (0x56595559)
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_set_pix_format Selected palette
YUYV
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_do_set_pix_format: Testing
palette YUYV (320x240)
[2:ml2] [WRN] [VID] [Sep 03 10:47:34] v4l2_do_set_pix_format: Adjusting
resolution from 320x240 to 352x288.
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_do_set_pix_format: Using palette
YUYV (352x288) bytesperlines 704 sizeimage 202752 colorspace 00000000
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980900, "Brightness", range -10,10
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Brightness",
default 2, current -1
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980901, "Contrast", range 1,32
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Contrast",
default 17, current 17
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980902, "Saturation", range 0,32
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Saturation",
default 17, current 17
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980903, "Hue", range -5,5
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Hue", default 0,
current 0
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980918, "Power Line Frequency", range 0,2
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Power Line
Frequency", default 2, current 2
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: found control
0x00980910, "Gamma", range 100,200
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] v4l2_scan_controls: "Gamma", default
150, current 150
[2:ml2] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: mmap information:
frames=4
[2:ml2] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 0 length=202752
Address (fc0af000)
[2:ml2] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 1 length=202752
Address (fc07d000)
[2:ml2] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 2 length=202752
Address (fc04b000)
[2:ml2] [DBG] [VID] [Sep 03 10:47:34] v4l2_set_mmap: 3 length=202752
Address (fc019000)
[2:ml2] [ERR] [VID] [Sep 03 10:47:34] v4l2_set_mmap: Error starting stream.
VIDIOC_STREAMON: No space left on device
[2:ml2] [NTC] [VID] [Sep 03 10:47:34] vid_v4lx_start: Using V4L1
[2:ml2] [NTC] [ALL] [Sep 03 10:47:34] image_ring_resize: Resizing
pre_capture buffer to 1 items
[1:ml1] [DBG] [VID] [Sep 03 10:47:34] v4l2_next: 1) vid_source->pframe -1
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 2) vid_source->pframe -1
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: the_buffer index 0 Address
(14e5f000)
[1:ml1] [NTC] [STR] [Sep 03 10:47:35] http_bindsock: listening on 127.0.0.1
port 8081
[1:ml1] [NTC] [ALL] [Sep 03 10:47:35] motion_init: Started motion-stream
server on port 8081 (auth Disabled)
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: the_buffer index 1 Address
(14e2d000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:35] v4l2_next: the_buffer index 2 Address
(14dfb000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: the_buffer index 3 Address
(14dc9000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:36] v4l2_next: the_buffer index 0 Address
(14e5f000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: the_buffer index 1 Address
(14e2d000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:37] v4l2_next: the_buffer index 2 Address
(14dfb000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: the_buffer index 3 Address
(14dc9000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:38] v4l2_next: the_buffer index 0 Address
(14e5f000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: the_buffer index 1 Address
(14e2d000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:39] v4l2_next: the_buffer index 2 Address
(14dfb000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: the_buffer index 3 Address
(14dc9000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:40] v4l2_next: the_buffer index 0 Address
(14e5f000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: the_buffer index 1 Address
(14e2d000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:41] v4l2_next: the_buffer index 2 Address
(14dfb000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: the_buffer index 3 Address
(14dc9000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:42] v4l2_next: the_buffer index 0 Address
(14e5f000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: the_buffer index 1 Address
(14e2d000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:43] v4l2_next: the_buffer index 2 Address
(14dfb000)
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: the_buffer index 3 Address
(14dc9000)
[2:ml2] [ERR] [ALL] [Sep 03 10:47:44] motion_init: Error capturing first
image
[2:ml2] [NTC] [STR] [Sep 03 10:47:44] http_bindsock: listening on 127.0.0.1
port 8082
[2:ml2] [NTC] [ALL] [Sep 03 10:47:44] motion_init: Started motion-stream
server on port 8082 (auth Disabled)
[2:ml2] [ERR] [ALL] [Sep 03 10:47:44] motion_loop: Video device fatal error
- Closing video device
[2:ml2] [NTC] [VID] [Sep 03 10:47:44] vid_close: Closing video device
/dev/video1
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:44] v4l2_next: the_buffer index 0 Address
(14e5f000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:44] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: the_buffer index 1 Address
(14e2d000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:45] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:45] v4l2_next: the_buffer index 2 Address
(14dfb000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:45] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: the_buffer index 3 Address
(14dc9000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:46] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:46] v4l2_next: the_buffer index 0 Address
(14e5f000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:46] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: 1) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: 2) vid_source->pframe 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: 3) vid_source->pframe 1
vid_source->buf.index 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: the_buffer index 1 Address
(14e2d000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:47] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: 1) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: 2) vid_source->pframe 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: 3) vid_source->pframe 2
vid_source->buf.index 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:47] v4l2_next: the_buffer index 2 Address
(14dfb000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:47] motion_loop: vid_return_code 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: 1) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: 2) vid_source->pframe 2
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: 3) vid_source->pframe 3
vid_source->buf.index 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: the_buffer index 3 Address
(14dc9000)
[2:ml2] [DBG] [ALL] [Sep 03 10:47:48] motion_loop: vid_return_code 1
[2:ml2] [NTC] [ALL] [Sep 03 10:47:48] motion_loop: End of event 1
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: 1) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: 2) vid_source->pframe 3
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: 3) vid_source->pframe 0
vid_source->buf.index 0
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: vid_source->buf.bytesused
202752
[1:ml1] [DBG] [VID] [Sep 03 10:47:48] v4l2_next: the_buffer index 0 Address
(14e5f000)
[1:ml1] [NTC] [ALL] [Sep 03 10:47:48] motion_loop: End of event 1
[2:ml2] [NTC] [ALL] [Sep 03 10:47:48] motion_loop: Thread exiting
[2:ml2] [NTC] [STR] [Sep 03 10:47:48] stream_stop: Closing motion-stream
listen socket & active motion-stream sockets
[2:ml2] [NTC] [STR] [Sep 03 10:47:48] stream_stop: Closed motion-stream
listen socket & active motion-stream sockets
[1:ml1] [NTC] [ALL] [Sep 03 10:47:49] motion_loop: Thread exiting
[1:ml1] [NTC] [STR] [Sep 03 10:47:49] stream_stop: Closing motion-stream
listen socket & active motion-stream sockets
[1:ml1] [NTC] [STR] [Sep 03 10:47:49] stream_stop: Closed motion-stream
listen socket & active motion-stream sockets
[1:ml1] [INF] [ALL] [Sep 03 10:47:49] motion_cleanup: Calling vid_close()
from motion_cleanup
[1:ml1] [NTC] [VID] [Sep 03 10:47:49] vid_close: Closing video device
/dev/video0
[0:web_control] [NTC] [STR] [Sep 03 10:47:49] httpd_run: motion-httpd -
Finishing
[0:web_control] [NTC] [STR] [Sep 03 10:47:49] httpd_run: motion-httpd
Closing
[0:web_control] [NTC] [STR] [Sep 03 10:47:49] motion_web_control:
motion-httpd thread exit
[0:motion] [NTC] [ALL] [Sep 03 10:47:50] main: Threads finished
[0:motion] [NTC] [ALL] [Sep 03 10:47:51] main: Motion terminating
[0:motion] [NTC] [ALL] [Sep 03 10:47:51] motion_remove_pid: Closing logfile
(/var/log/motion/motion.log).
I want to record from both cameras because one is on another place(behind
corner)
Thank you for your help
Ondra
p? 30. 8. 2019 v 15:36 odes?latel Frank Dias <fr...@djfamily.net> napsal:
> I went the route of using camera directory in motion.conf so I could just
> drop a camera.conf file and do a container restart and the camera was loaded
>
> On Fri, Aug 30, 2019, 3:42 AM Ondra <speed4a...@gmail.com> wrote:
>
>> Hello please I need help. I ve downloaded your docker container from
>> https://github.com/Motion-Project/motion-docker I ve made changes like
>> add device(two cameras) so my full command is like this :
>>
>> docker run -d --name=motion22 -p 7999:7999 -p 8081:8081 -p
>> 8082:8082 -p 8083:8083 -p 8084:8084 -p 8085:8085 -p
>> 8087:8087 -e TZ="Europe\Prague" -v
>> /data/motion/config:/usr/local/etc/motion -v
>> /data/motion/storage:/var/lib/motion --device=/dev/video0:/dev/video0
>> --device=/dev/video1:/dev/video1 --restart=always
>> motionproject/motion:latest
>>
>> so now when I start container docker start motion22 only one camera is
>> Active but second is not. I've made a changes in config /var/local/motion
>> (before I ve copied from /example) but still only one camera is active. I
>> don t know what to do to make active both cameras
>>
>> Thank you for help me out
>> _______________________________________________
>> Motion-user mailing list
>> Motion-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 159, Issue 2
*******************************************
