Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Watchdog timeout (Kevin)
----------------------------------------------------------------------
Message: 1
Date: Sun, 10 May 2020 20:48:26 +1000
From: Kevin <kmg...@bigpond.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Watchdog timeout
Message-ID: <fa76c490-b824-4c11-8c9d-5b41f24ff...@bigpond.com>
Content-Type: text/plain; charset="utf-8"
Others with more knowledge of the Motion internals (wouldn't be hard) may
disagree, but I think Motion has multiple threads.
-------- Original Message --------
From: Peter Cain <mot...@centuri.com>
Sent: Sun May 10 20:29:29 GMT+10:00 2020
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Watchdog timeout
I guess Motion is single threaded. So using 100 pc of 1 CPU and cannot use
more.
On Sun, 10 May 2020, 03:12 Kevin, <kmg...@bigpond.com> wrote:
> BINGO - almost. Motion is using about 30% of a CPU - see attached log file.
>
> I'm not sure what the camera delivers (it's a cheap eBay one) but I tought
> it was 640 x 480. But why is this not a problem without the netcam
> parameter? Or do I just have to accept it?
>
>
>
> On 2020 M05 10, Sun 01:08:38 AEST tosiara thou dist spake thusly:
>
> > Ok, so now try change motion config to use netcam_url v4l2:///dev/video0
>
> >
>
> > On Sat, May 9, 2020 at 1:36 PM Kevin <kmg...@bigpond.com> wrote:
>
> > > # ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f avi
> /dev/null
>
> > > <snip>
>
> > >
>
> > > Input #0, video4linux2,v4l2, from '/dev/video0':
>
> > > Duration: N/A, start: 473328.421471, bitrate: 48660 kb/s
>
> > >
>
> > > Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
>
> > >
>
> > > 48660 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
>
> > > File '/dev/null' already exists. Overwrite ? [y/N] y
>
> > >
>
> > > Output #0, avi, to '/dev/null':
>
> > > Metadata:
>
> > > ISFT : Lavf58.20.100
>
> > > Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
>
> > >
>
> > > q=2-31, 48660 kb/s, 30 fps, 30 tbr, 60 tbn, 60 tbc
>
> > >
>
> > > Stream mapping:
>
> > > Stream #0:0 -> #0:0 (copy)
>
> > >
>
> > > Press [q] to stop, [?] for help
>
> > > frame= 28 fps=0.0 q=-1.0 size= 5382kB time=00:00:03.61 biframe= 31
>
> > > fps= 31 q=-1.0 size= 5894kB time=00:00:04.10 biframe= 34 fps= 23
>
> > > q=-1.0 size= 6662kB time=00:00:04.58 biframe= 36 fps= 18 q=-1.0
>
> > > size= 6918kB time=00:00:05.06 biframe= 40 fps= 16 q=-1.0 size=
>
> > > 7686kB time=00:00:05.53 biframe= 45 fps= 15 q=-1.0 size= 8710kB
>
> > > time=00:00:06.15 biframe= 49 fps= 14 q=-1.0 size= 9478kB
>
> > > time=00:00:06.63 biframe= 53 fps= 13 q=-1.0 size= 10502kB
>
> > > time=00:00:07.10 biframe= 57 fps= 13 q=-1.0 size= 11270kB
>
> > > time=00:00:07.58 biframe= 61 fps= 12 q=-1.0 size= 12038kB
>
> > > time=00:00:08.06 biframe= 65 fps= 12 q=-1.0 size= 12806kB
>
> > > time=00:00:08.66 biframe= 67 fps= 11 q=-1.0 size= 13062kB
>
> > > time=00:00:09.03 biframe= 70 fps= 11 q=-1.0 size= 13830kB
>
> > > time=00:00:09.63 biframe= 74 fps= 10 q=-1.0 size= 14598kB
>
> > > time=00:00:10.11 biframe= 75 fps= 10 q=-1.0 Lsize= 14870kB
>
> > > time=00:00:10.35 bitrate=11769.7kbits/s speed=1.41x
>
> > > <ctl-c>
>
> > > video:14850kB audio:0kB subtitle:0kB other streams:0kB global
> headers:0kB
>
> > > muxing overhead: 0.135561%
>
> > > Exiting normally, received signal 2.
>
> > > ------------------------------
>
> > > *From:* tosiara
>
> > > *Sent:* Sat May 09 18:30:38 GMT+10:00 2020
>
> > > *To:* Motion discussion list
>
> > > *Subject:* Re: [Motion-user] Watchdog timeout
>
> > >
>
> > > Strange that you get the following errors while the same command works
> on
>
> > > my machine without any issues:
>
> > >
>
> > > [mp4 @ 0x5a5cf0] Could not find tag for codec rawvideo in stream #0,
> codec
>
> > > not currently supported in container
>
> > > Could not write header for output file #0 (incorrect codec parameters
> ?):
>
> > > Invalid argument
>
> > >
>
> > > Can you try to run a slightly changed command:
>
> > >
>
> > > ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f avi /dev/null
>
> > >
>
> > > On Sat, May 9, 2020 at 9:51 AM Kevin < kmg...@bigpond.com> wrote:
>
> > >> As requested:
>
> > >>
>
> > >> # ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f mp4
> /dev/null
>
> > >> ffmpeg version 4.1.4-1+rpt7~deb10u1 Copyright (c) 2000-2019 the FFmpeg
>
> > >> developers
>
> > >>
>
> > >> built with gcc 8 (Raspbian 8.3.0-6+rpi1)
>
> > >> configuration: --prefix=/usr --extra-version='1+rpt7~deb10u1'
>
> > >>
>
> > >> --toolchain=hardened --incdir=/usr/include/arm-linux-gnueabihf
>
> > >> --enable-gpl
>
> > >> --disable-stripping --enable-avresample --disable-filter=resample
>
> > >> --enable-avisynth --enable-gnutls --enable-ladspa --enable-libaom
>
> > >> --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca
>
> > >> --enable-libcdio --enable-libcodec2 --enable-libflite
>
> > >> --enable-libfontconfig --enable-libfreetype --enable-libfribidi
>
> > >> --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame
>
> > >> --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt
>
> > >> --enable-libopus --enable-libpulse --enable-librsvg
>
> > >> --enable-librubberband
>
> > >> --enable-libshine --enable-libsnappy --enable-libsoxr
> --enable-libspeex
>
> > >> --enable-libssh --enable-libtheora --enable-libtwolame
>
> > >> --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf --cpu=arm1176jzf-s --arch=arm
>
> > >>
>
> > >> WARNING: library configuration mismatch
>
> > >> avutil configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> avcodec configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> avformat configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> avdevice configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> avfilter configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> avresample configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> swscale configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> swresample configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> postproc configuration: --prefix=/usr
>
> > >>
>
> > >> --extra-version='1+rpt7~deb10u1' --toolchain=hardened
>
> > >> --incdir=/usr/include/arm-linux-gnueabihf --enable-gpl
>
> > >> --disable-stripping
>
> > >> --enable-avresample --disable-filter=resample --enable-avisynth
>
> > >> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
>
> > >> --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio
>
> > >> --enable-libcodec2 --enable-libflite --enable-libfontconfig
>
> > >> --enable-libfreetype --enable-libfribidi --enable-libgme
> --enable-libgsm
>
> > >> --enable-libjack --enable-libmp3lame --enable-libmysofa
>
> > >> --enable-libopenjpeg --enable-libopenmpt --enable-libopus
>
> > >> --enable-libpulse
>
> > >> --enable-librsvg --enable-librubberband --enable-libshine
>
> > >> --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libssh
>
> > >> --enable-libtheora --enable-libtwolame --enable-libvidstab
>
> > >> --enable-libvorbis --enable-libvpx --enable-libwavpack
> --enable-libwebp
>
> > >> --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq
>
> > >> --enable-libzvbi --enable-lv2 --enable-omx --enable-openal
>
> > >> --enable-opengl
>
> > >> --enable-sdl2 --enable-omx-rpi --enable-mmal --enable-neon
> --enable-rpi
>
> > >> --enable-libdc1394 --enable-libdrm --enable-libiec61883
>
> > >> --enable-chromaprint --enable-frei0r --enable-libx264
>
> > >> --libdir=/usr/lib/arm-linux-gnueabihf/neon/vfp --cpu=cortex-a7
>
> > >> --arch=armv6t2 --disable-thumb --enable-shared --disable-doc
>
> > >> --disable-programs
>
> > >>
>
> > >> libavutil 56. 22.100 / 56. 22.100
>
> > >> libavcodec 58. 35.100 / 58. 35.100
>
> > >> libavformat 58. 20.100 / 58. 20.100
>
> > >> libavdevice 58. 5.100 / 58. 5.100
>
> > >> libavfilter 7. 40.101 / 7. 40.101
>
> > >> libavresample 4. 0. 0 / 4. 0. 0
>
> > >> libswscale 5. 3.100 / 5. 3.100
>
> > >> libswresample 3. 3.100 / 3. 3.100
>
> > >> libpostproc 55. 3.100 / 55. 3.100
>
> > >>
>
> > >> Input #0, video4linux2,v4l2, from '/dev/video0':
>
> > >> Duration: N/A, start: 459774.991048, bitrate: 48660 kb/s
>
> > >>
>
> > >> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
>
> > >>
>
> > >> 48660 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
>
> > >> File '/dev/null' already exists. Overwrite ? [y/N] y
>
> > >> [mp4 @ 0x5a5cf0] Could not find tag for codec rawvideo in stream #0,
>
> > >> codec not currently supported in container
>
> > >> Could not write header for output file #0 (incorrect codec parameters
> ?):
>
> > >> Invalid argument
>
> > >>
>
> > >> Stream mapping:
>
> > >> Stream #0:0 -> #0:0 (copy)
>
> > >>
>
> > >> Last message repeated 1 times
>
> > >>
>
> > >> ====
>
> > >>
>
> > >> ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an /dev/null
>
> > >> <snip>
>
> > >>
>
> > >> Input #0, video4linux2,v4l2, from '/dev/video0':
>
> > >> Duration: N/A, start: 459920.101369, bitrate: 48660 kb/s
>
> > >>
>
> > >> Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 352x288,
>
> > >>
>
> > >> 48660 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc
>
> > >> [NULL @ 0x102ad90] Unable to find a suitable output format for
>
> > >> '/dev/null'
>
> > >> /dev/null: Invalid argument
>
> > >> ------------------------------
>
> > >> *From:* tosiara
>
> > >> *Sent:* Sat May 09 16:22:21 GMT+10:00 2020
>
> > >> *To:* Motion discussion list
>
> > >> *Subject:* Re: [Motion-user] Watchdog timeout
>
> > >>
>
> > >> Try to run ffmpeg capture like this:
>
> > >>
>
> > >> ffmpeg -f video4linux2 -i /dev/video0 -vcodec copy -an -f mp4
> /dev/null
>
> > >>
>
> > >> Let it run for a few minutes and paste the output here
>
> > >>
>
> > >> On Sat, May 9, 2020 at 12:24 AM Kevin < kmg...@bigpond.com> wrote:
>
> > >>> Hi Joris,
>
> > >>>
>
> > >>> Firstly, the recording is to an NFS attached SSD drive. Secondly, I
>
> > >>> initially tried different values for framerate - as low as three -
>
> > >>> without
>
> > >>> success.
>
> > >>>
>
> > >>> Cheers
>
> > >>> Kevin
>
> > >>> ------------------------------
>
> > >>> *From:* Joris
>
> > >>> *Sent:* Fri May 08 22:10:17 GMT+10:00 2020
>
> > >>> *To:* Motion discussion list
>
> > >>> *Subject:* Re: [Motion-user] Watchdog timeout
>
> > >>>
>
> > >>> Hi Kevin,
>
> > >>>
>
> > >>> This is a (very) long shot. I assume you are saving to the microsd
> card.
>
> > >>> But it might not have the performance needed to flush all the images
> and
>
> > >>> then Weird Things (tm) can happen in the Linux kernel. There are many
>
> > >>> reasons cards may be slower than you expect.
>
> > >>> Could you try to reduce the framerate from 100 to say 10 or 3?
>
> > >>> Additionally you could run a benchmark utility like iozone and tell
> it
>
> > >>> to
>
> > >>> write representatively sized files and see how much margin the card
> has.
>
> > >>>
>
> > >>> Kind regards, J
>
> > >>>
>
> > >>> Op vr 8 mei 2020 om 08:43 schreef Kevin < kmg...@bigpond.com>:
>
> > >>>> 1) gdb: Motion crashed so I hoped that gdb would provide a useful
>
> > >>>> backstack trace, obviously it hasn't.
>
> > >>>>
>
> > >>>> 2) ffmpeg: the command you gave me does not work:
>
> > >>>>
>
> > >>>> error: XDG_RUNTIME_DIR not set in the environment.
>
> > >>>> Could not initialize SDL -
>
> > >>>> (Did you set the DISPLAY variable?)
>
> > >>>>
>
> > >>>> All my Pi' are headless. However, if it means anything, after Motion
>
> > >>>> has finished a recording, I use ffmpeg to create a timelapse
> version.
>
> > >>>> The
>
> > >>>> command I use is;
>
> > >>>>
>
> > >>>> ffmpeg -y -i $file -filter:v setpts=0.3*PTS -an
>
> > >>>> $output_dir/${output_name}"
>
> > >>>>
>
> > >>>> BTW: If it will help, I'm willing to try and compile the source and
> use
>
> > >>>> gdb to track the error - but I'd need your help to know where to
> place
>
> > >>>> break points.
>
> > >>>>
>
> > >>>> I'm pretty busy right now so this would not be until some time next
>
> > >>>> week. It could also take a while for me to compile the source as
> all my
>
> > >>>> experience is with Fedora and dnf/yum.
>
> > >>>> ------------------------------
>
> > >>>> *From:* tosiara
>
> > >>>> *Sent:* Fri May 08 15:28:15 GMT+10:00 2020
>
> > >>>> *To:* Motion discussion list
>
> > >>>> *Subject:* Re: [Motion-user] Watchdog timeout
>
> > >>>>
>
> > >>>> You did not mention that motion crashes. Can you explain the gdb log
>
> > >>>> you attached?
>
> > >>>>
>
> > >>>> And try to run "ffplay -f video4linux2 /dev/video0" on your motion
> box
>
> > >>>> - does it play?
>
> > >>>>
>
> > >>>> On Fri, May 8, 2020 at 1:15 AM Kevin < kmg...@bigpond.com> wrote:
>
> > >>>>> Sadly, no change.
>
> > >>>>>
>
> > >>>>>
>
> > >>>>>
>
> > >>>>> # rpi-eeprom-update
>
> > >>>>>
>
> > >>>>> BCM2711 detected
>
> > >>>>>
>
> > >>>>> BOOTLOADER: up-to-date
>
> > >>>>>
>
> > >>>>> CURRENT: Thu 16 Apr 17:11:26 UTC 2020 (1587057086)
>
> > >>>>>
>
> > >>>>> LATEST: Thu 16 Apr 17:11:26 UTC 2020 (1587057086)
>
> > >>>>>
>
> > >>>>> FW DIR: /lib/firmware/raspberrypi/bootloader/critical
>
> > >>>>>
>
> > >>>>> VL805: up-to-date
>
> > >>>>>
>
> > >>>>> CURRENT: 000137ad
>
> > >>>>>
>
> > >>>>> LATEST: 000137ad
>
> > >>>>>
>
> > >>>>>
>
> > >>>>>
>
> > >>>>> See attachments for other "stuff".
>
> > >>>>>
>
> > >>>>> On 2020 M05 7, Thu 15:26:30 AEST tosiara thou dist spake thusly:
>
> > >>>>> > Could you try to update to mmotion 4.3.1 as well as latest Rpi
>
> > >>>>>
>
> > >>>>> firmware?
>
> > >>>>>
>
> > >>>>> > There were similar issues with USB and Rpi in the past and
> usually
>
> > >>>>>
>
> > >>>>> firmware
>
> > >>>>>
>
> > >>>>> > update helped
>
> > >>>>>
>
> > >>>>> _______________________________________________
>
> > >>>>> Motion-user mailing list
>
> > >>>>> Motion-user@lists.sourceforge.net
>
> > >>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>
> > >>>>> https://motion-project.github.io/
>
> > >>>>>
>
> > >>>>> Unsubscribe:
> https://lists.sourceforge.net/lists/options/motion-user
>
> > >>>>>
>
> > >>>> ------------------------------
>
> > >>>>
>
> > >>>> Motion-user mailing list
>
> > >>>> Motion-user@lists.sourceforge.net
>
> > >>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>
> > >>>> https://motion-project.github.io/
>
> > >>>>
>
> > >>>> Unsubscribe:
> https://lists.sourceforge.net/lists/options/motion-user
>
> > >>>>
>
> > >>>> _______________________________________________
>
> > >>>> Motion-user mailing list
>
> > >>>> Motion-user@lists.sourceforge.net
>
> > >>>> https://lists.sourceforge.net/lists/listinfo/motion-user
> <p style=" margin-top:0px; margin-
>
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
https://motion-project.github.io/
Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 167, Issue 18
********************************************
