Send Motion-user mailing list submissions to
        motion-user@lists.sourceforge.net

To subscribe or unsubscribe via the World Wide Web, visit
        https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
        motion-user-requ...@lists.sourceforge.net

You can reach the person managing the list at
        motion-user-ow...@lists.sourceforge.net

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."


Today's Topics:

   1. Re: illegible mp4 files (MrDave)


----------------------------------------------------------------------

Message: 1
Date: Mon, 25 Jan 2021 18:54:02 -0700
From: MrDave <motionmrd...@gmail.com>
To: motion-user@lists.sourceforge.net
Subject: Re: [Motion-user] illegible mp4 files
Message-ID: <c8c3c9e2-60c6-e093-f50c-cf64602d2...@gmail.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"

FWIW:? The video played fine for me.? Not sure if that video was one of 
the problem ones or not.? It was just a little short at 0.27 seconds.

I would recommend you change the movie_quality setting.? Putting quality 
at 100 invokes FFmpeg to change the H264 profile to " (/High 4:4:4 
Predictive/)".? This limits the devices/software upon which the video 
can be played back.

If you have old videos that are "unplayable", you may try to transcode 
them using FFmpeg to a lower quality (CRF) to see if they are then 
viewable.

The final thing I can think of is to change the container from MP4 to 
MKV and see if that resolves the issue.

Dave
On 1/25/2021 3:45 PM, Tony Ross wrote:
> Thank you for the reply. The camera is capable of 30 fps with cat7 
> sftp (shielded foil twist pair) network cabling into a lightly-loaded 
> Tripp-Lite 8-port POE switch. RTSP using both vlc and ffplay is 
> entirely successful. Two computers both have adequate cpu; on the one 
> currently running motion:
>
> $ lscpu
> Architecture:??????? x86_64
> CPU op-mode(s):????? 32-bit, 64-bit
> Byte Order:????????? Little Endian
> Address sizes:?????? 39 bits physical, 48 bits virtual
> CPU(s):????????????? 4
> On-line CPU(s) list: 0-3
> Thread(s) per core:? 2
> Core(s) per socket:? 2
> Socket(s):?????????? 1
> NUMA node(s):??????? 1
> Vendor ID:?????????? GenuineIntel
> CPU family:????????? 6
> Model:?????????????? 60
> Model name:????????? Intel(R) Core(TM) i5-4200M CPU @ 2.50GHz
> Stepping:??????????? 3
> CPU MHz:???????????? 2951.756
> CPU max MHz:???????? 3100.0000
> CPU min MHz:???????? 800.0000
> BogoMIPS:??????????? 4988.77
> Virtualization:????? VT-x
> L1d cache:?????????? 32K
> L1i cache:?????????? 32K
> L2 cache:??????????? 256K
> L3 cache:??????????? 3072K
> NUMA node0 CPU(s):?? 0-3
> Flags:?????????????? fpu vme de pse tsc msr pae mce cx8 apic sep mtrr 
> pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe 
> syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts 
> rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq 
> dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid 
> sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes xsave avx f16c 
> rdrand lahf_lm abm cpuid_fault epb invpcid_single pti ssbd ibrs ibpb 
> stibp tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust 
> bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm ida arat pln pts 
> md_clear flush_l1d
>
>
> On 1/24/21 7:40 PM, manu.kemppainen--- via Motion-user wrote:
>> Hi Tony,
>>
>> Have you tried lowering the fps or resolution for the video?
>> Problem May be that camera/network/compute you are using are not 
>> capable to handle 30fps with high resolution.
>> You May have to change this from the camera settings also.
>> My 5mp camera can only produce 10fps on max resoluution.
>>
>> Br,
>> Manu
>>
>> 25.1.2021 2.38 Tony Ross <ynots...@hotmail.com> kirjoitti:
>>
>>     I apologize for providing what some might consider too much
>>     information,
>>     but here are the non-commented lines from motion.conf. Another
>>     intrusion
>>     occurred with an illegible .mp4 file that would've provided evidence:
>>
>>     $ grep -Ev "^$|^;|^#" etc/motion/motion.conf
>>     daemon on
>>     setup_mode off
>>     log_file /home/myname/etc/motion/motion.log
>>     log_level 9
>>     log_type ALL
>>     quiet on
>>     native_language on
>>     input -1
>>     norm 0
>>     frequency 0
>>     auto_brightness 0
>>     roundrobin_frames 1
>>     roundrobin_skip 1
>>     roundrobin_switchfilter off
>>     netcam_keepalive off
>>     netcam_tolerant_check off
>>     netcam_use_tcp on
>>     minimum_frame_time 0
>>     text_right %Y-%m-%d\n%T-%q
>>     text_changes off
>>     text_scale 1
>>     text_event %Y%m%d%H%M%S
>>     emulate_motion off
>>     threshold 1500
>>     threshold_maximum 0
>>     threshold_tune off
>>     noise_level 32
>>     noise_tune on
>>     despeckle_filter EedDl
>>     smart_mask_speed 0
>>     lightswitch_percent 40
>>     lightswitch_frames 2
>>     minimum_motion_frames 2
>>     event_gap 60
>>     pre_capture 0
>>     post_capture 0
>>     picture_output best
>>     picture_output_motion off
>>     picture_type jpeg
>>     picture_quality 75
>>     picture_filename %v-%Y%m%d%H%M%S-%q
>>     snapshot_interval 0
>>     snapshot_filename lastsnap
>>     movie_output on
>>     movie_output_motion off
>>     movie_max_time 600
>>     movie_bps 400000
>>     movie_quality 100
>>     movie_codec mp4
>>     movie_duplicate_frames off
>>     movie_filename %v-%Y%m%d%H%M%S
>>     movie_extpipe_use off
>>     timelapse_interval 0
>>     timelapse_mode daily
>>     timelapse_fps 30
>>     timelapse_codec mpg
>>     timelapse_filename %Y%m%d-timelapse
>>     webcontrol_port 8080
>>     webcontrol_ipv6 off
>>     webcontrol_localhost off
>>     webcontrol_parms 2
>>     webcontrol_interface 0
>>     webcontrol_auth_method 0
>>     webcontrol_tls off
>>     stream_port 8081
>>     stream_localhost off
>>     stream_auth_method 0
>>     stream_tls off
>>     stream_preview_scale 25
>>     stream_preview_newline off
>>     stream_preview_method 0
>>     stream_quality 50
>>     stream_grey off
>>     stream_motion off
>>     stream_limit 0
>>     database_host localhost
>>     database_port 0
>>     database_busy_timeout 0
>>     sql_log_picture off
>>     sql_log_snapshot off
>>     sql_log_movie off
>>     sql_log_timelapse off
>>     track_type 0
>>     track_auto off
>>     track_motorx 0
>>     track_motorx_reverse off
>>     track_motory 0
>>     track_motory_reverse off
>>     track_maxx 0
>>     track_minx 0
>>     track_maxy 0
>>     track_miny 0
>>     track_homex 128
>>     track_homey 128
>>     track_iomojo_id 0
>>     track_step_angle_x 10
>>     track_step_angle_y 10
>>     track_move_wait 10
>>     track_speed 255
>>     track_stepsize 40
>>     camera /home/myname/etc/motion/amcrest_roof.conf
>>     camera /home/myname/etc/motion/amcrest_shop.conf
>>
>>     On 1/21/21 3:42 PM, I wrote wrote:
>>     > Greetings, I would appreciate some help with diagnosing why mp4
>>     files
>>     > are not properly viewable after a motion event. jpg are
>>     perfect, but
>>     > the mp4 files are 4 wide bands high, each band containing
>>     diagonally
>>     > coarse pixelations. It appears that if these diagonals were
>>     instead
>>     > vertical then a corrected video might appear.
>>     >
>>     > One camera is PTZ POE, the lower-resolution camera is PTZ WiFi.
>>     Both
>>     > cameras are configured for 30 fps H.264 output.
>>     >
>>     > RTSP streams are perfectly viewable with no errors in both vlc and
>>     > ffplay. motion.log indicates no obvious errors to me, here
>>     "killall
>>     > motion"-stopped after the first event. The .log and 2 .conf files
>>     > follow for your considerations:
>>     >
>>     > $ motion
>>     > [0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config
>>     file
>>     > /home/myname/etc/motion/motion.conf
>>     > [0:motion] [NTC] [ALL] config_camera: Processing camera config
>>     file
>>     > /home/myname/etc/motion/amcrest_roof.conf
>>     > [0:motion] [NTC] [ALL] config_camera: Processing camera config
>>     file
>>     > /home/myname/etc/motion/amcrest_shop.conf
>>     > [0:motion] [NTC] [ALL] motion_startup: Logging to file
>>     > (/home/myname/etc/motion/motion.log)
>>     >
>>     > $ cat /home/myname/etc/motion/motion.log
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_startup: Motion
>>     4.3.2
>>     > Started
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_startup: Using log
>>     > type (ALL) log level (ALL)
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] become_daemon: Motion
>>     going
>>     > to daemon mode
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_startup: Motion
>>     > running as daemon process
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] conf_output_parms:
>>     Writing
>>     > configuration parameters from all files (3):
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] Thread 0 - Config file:
>>     > /home/myname/etc/motion/motion.conf
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] daemon on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] setup_mode off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] pid_file
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] log_file
>>     > /home/myname/etc/motion/motion.log
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] log_level 9
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] log_type ALL
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] quiet on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] native_language on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_name
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_id 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] target_dir
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] videodevice /dev/video0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] vid_control_params
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] v4l2_palette 17
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] input -1
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] norm 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] frequency 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] auto_brightness 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] tunerdevice
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] roundrobin_frames 1
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] roundrobin_skip 1
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43]
>>     roundrobin_switchfilter off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_url
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_highres
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_userpass
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_keepalive off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_proxy
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_tolerant_check off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_use_tcp on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_decoder
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mmalcam_name
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mmalcam_control_params
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] width 640
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] height 480
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] framerate 15
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] minimum_frame_time 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] rotate 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] flip_axis none
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_mode off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_style box
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_left
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_right %Y-%m-%d\n%T-%q
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_changes off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_scale 1
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] text_event %Y%m%d%H%M%S
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] emulate_motion off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] threshold 1500
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] threshold_maximum 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] threshold_tune off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] noise_level 32
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] noise_tune on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] despeckle_filter EedDl
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] area_detect
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_file
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_privacy
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] smart_mask_speed 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] lightswitch_percent 40
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] lightswitch_frames 2
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] minimum_motion_frames 2
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] event_gap 60
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] pre_capture 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] post_capture 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_event_start
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_event_end
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_picture_save
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_area_detected
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_motion_detected
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_movie_start
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_movie_end
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_camera_lost
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] on_camera_found
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_output best
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_output_motion off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_type jpeg
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_quality 75
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_exif
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_filename
>>     > %v-%Y%m%d%H%M%S-%q
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] snapshot_interval 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] snapshot_filename lastsnap
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_output on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_output_motion off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_max_time 600
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_bps 400000
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_quality 100
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_codec mp4
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_duplicate_frames off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_passthrough off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_filename
>>     %v-%Y%m%d%H%M%S
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_extpipe_use off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_extpipe
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_interval 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_mode daily
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_fps 30
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_codec mpg
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] timelapse_filename
>>     > %Y%m%d-timelapse
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] video_pipe
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] video_pipe_motion
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_port 8080
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_ipv6 off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_localhost off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_parms 2
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_interface 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_auth_method 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_authentication
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_tls off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_cert
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_key
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] webcontrol_cors_header
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_port 8081
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_localhost off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_auth_method 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_authentication
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_tls off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_cors_header
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_preview_scale 25
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_preview_newline off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_preview_method 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_quality 50
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_grey off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_motion off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_maxrate 1
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] stream_limit 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_type
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_dbname
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_host localhost
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_port 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_user
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_password
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] database_busy_timeout 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_picture off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_snapshot off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_movie off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_log_timelapse off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_query_start
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_query_stop
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] sql_query
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_type 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_auto off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_port
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motorx 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motorx_reverse off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motory 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_motory_reverse off
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_maxx 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_minx 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_maxy 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_miny 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_homex 128
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_homey 128
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_iomojo_id 0
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_step_angle_x 10
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_step_angle_y 10
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_move_wait 10
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_speed 255
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_stepsize 40
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] track_generic_move
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_dir
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] Thread 1 - Config file:
>>     > /home/myname/etc/motion/amcrest_roof.conf
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_name roof
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] target_dir
>>     > /home/myname/motion/roof
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_url <redacted>
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] width 2592
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] height 1520
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] framerate 30
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_mode on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_style redbox
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_file
>>     > /home/myname/etc/motion/amcrest_2592x1520mask.pgm
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_filename
>>     > stills/%Y%m%d-%H:%M:%S
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_filename
>>     > videos/%Y%m%d-%H:%M:%S
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] Thread 2 - Config file:
>>     > /home/myname/etc/motion/amcrest_shop.conf
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_name shop
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] camera_id 1
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] target_dir
>>     > /home/myname/motion/shop
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] netcam_url <redacted>
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] width 1920
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] height 1080
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] framerate 30
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_mode on
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] locate_motion_style redbox
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] mask_file
>>     > /home/myname/etc/motion/amcrest_1920x1080mask.pgm
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] picture_filename
>>     > stills/%Y%m%d-%H:%M:%S
>>     > [0:motion] [INF] [ALL] [Jan 21 13:26:43] movie_filename
>>     > videos/%Y%m%d-%H:%M:%S
>>     > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: v4l2?? :
>>     available
>>     > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: bktr?? : not
>>     > available
>>     > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: webp?? :
>>     available
>>     > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: mmal?? : not
>>     > available
>>     > [0:motion] [DBG] [ALL] [Jan 21 13:26:43] motion_ntc: ffmpeg :
>>     available
>>     > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: mysql? : not
>>     > available
>>     > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: MariaDB: not
>>     > available
>>     > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: sqlite3:
>>     available
>>     > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: pgsql? : not
>>     > available
>>     > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] motion_ntc: nls??? :
>>     available
>>     > [0:motion] [ERR] [ALL] [Jan 21 13:26:43] motion_camera_ids:
>>     Camara IDs
>>     > are not unique or have values over 32,000. Falling back to thread
>>     > numbers
>>     > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_start_strm:
>>     Starting all
>>     > camera streams on port 8081
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_basic:
>>     > Basic authentication: available
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_digest:
>>     > Digest authentication: available
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43]
>>     webu_mhd_features_ipv6: IPV6:
>>     > available
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_tls:
>>     > SSL/TLS: available
>>     > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_strm_ntc: Started
>>     camera
>>     > 1 stream on port/camera_id 8081/1
>>     > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_strm_ntc: Started
>>     camera
>>     > 2 stream on port/camera_id 8081/2
>>     > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_start_ctrl: Starting
>>     > webcontrol on port 8080
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_basic:
>>     > Basic authentication: available
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_digest:
>>     > Digest authentication: available
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43]
>>     webu_mhd_features_ipv6: IPV6:
>>     > available
>>     > [0:motion] [DBG] [STR] [Jan 21 13:26:43] webu_mhd_features_tls:
>>     > SSL/TLS: available
>>     > [0:motion] [NTC] [STR] [Jan 21 13:26:43] webu_start_ctrl: Started
>>     > webcontrol on port 8080
>>     > [0:motion] [DBG] [VID] [Jan 21 13:26:43] bktr_mutex_init: BKTR
>>     is not
>>     > enabled.
>>     > [0:motion] [NTC] [ENC] [Jan 21 13:26:43] ffmpeg_global_init:
>>     ffmpeg
>>     > libavcodec version 58.35.100 libavformat version 58.20.100
>>     > [0:motion] [DBG] [DBL] [Jan 21 13:26:43] dbse_global_init:
>>     > Initializing database
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] translate_init: Language:
>>     > English
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>     Camera
>>     > ID: 1 is from /home/myname/etc/motion/amcrest_roof.conf
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>     Camera
>>     > ID: 1 Camera Name: roof Service: rtsp:
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>     Camera
>>     > ID: 2 is from /home/myname/etc/motion/amcrest_shop.conf
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] motion_start_thread:
>>     Camera
>>     > ID: 2 Camera Name: shop Service: rtsp:
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:26:43] motion_init: Camera 1
>>     > started: motion detection Enabled
>>     > [1:ml1:roof] [NTC] [VID] [Jan 21 13:26:43] vid_start: Opening
>>     Netcam RTSP
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:26:43] main: Waiting for
>>     threads to
>>     > finish, pid: 30579
>>     > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_parms:
>>     > Setting up Normal resolution stream.
>>     > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:26:43] motion_init: Camera 2
>>     > started: motion detection Enabled
>>     > [2:ml2:shop] [NTC] [VID] [Jan 21 13:26:43] vid_start: Opening
>>     Netcam RTSP
>>     > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_parms:
>>     > Setting up Normal resolution stream.
>>     > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_path:
>>     > Setting up rtsp via ffmpeg netcam
>>     > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_path:
>>     > Setting up rtsp via ffmpeg netcam
>>     > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_rtsp:
>>     > Normal resolution: Setting rtsp transport to tcp
>>     > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43] netcam_rtsp_set_rtsp:
>>     > Normal resolution: Setting rtsp transport to tcp
>>     > [1:ml1:roof] [INF] [NET] [Jan 21 13:26:43]
>>     netcam_rtsp_open_context:
>>     > Normal resolution: Opened camera(roof)
>>     > [2:ml2:shop] [INF] [NET] [Jan 21 13:26:43]
>>     netcam_rtsp_open_context:
>>     > Normal resolution: Opened camera(shop)
>>     > [1:ml1:roof] [INF] [ENC] [Jan 21 13:26:44] ffmpeg_avcodec_log:
>>     > deprecated pixel format used, make sure you did set range correctly
>>     > [1:ml1:roof] [DBG] [NET] [Jan 21 13:26:44] netcam_check_buffsize:
>>     > expanding buffer from [0/0] to [0/5910528] bytes.
>>     > [1:ml1:roof] [DBG] [NET] Above message repeats 1 times
>>     > [1:ml1:roof] [DBG] [NET] [Jan 21 13:26:44] netcam_check_buffsize:
>>     > expanding buffer from [5909760/5910528] to [5909760/11821056]
>>     bytes.
>>     > [1:ml1:roof] [NTC] [NET] [Jan 21 13:26:44] netcam_rtsp_connect:
>>     Normal
>>     > resolution: Camera (roof) connected
>>     > [1:ml1:roof] [DBG] [NET] [Jan 21 13:26:44] netcam_check_buffsize:
>>     > expanding buffer from [5909760/5910528] to [5909760/11821056]
>>     bytes.
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:26:44] image_ring_resize:
>>     Resizing
>>     > pre_capture buffer to 1 items
>>     > [3:nc3:roof] [NTC] [NET] [Jan 21 13:26:44] netcam_rtsp_handler:
>>     Normal
>>     > resolution: Camera handler thread [3] started
>>     > [3:nc3:roof] [INF] [NET] [Jan 21 13:26:44]
>>     netcam_rtsp_open_context:
>>     > Normal resolution: Opened camera(roof)
>>     > [2:ml2:shop] [INF] [ENC] [Jan 21 13:26:45] ffmpeg_avcodec_log:
>>     > deprecated pixel format used, make sure you did set range correctly
>>     > [2:ml2:shop] [DBG] [NET] [Jan 21 13:26:45] netcam_check_buffsize:
>>     > expanding buffer from [0/0] to [0/3112960] bytes.
>>     > [2:ml2:shop] [DBG] [NET] Above message repeats 1 times
>>     > [2:ml2:shop] [DBG] [NET] [Jan 21 13:26:45] netcam_check_buffsize:
>>     > expanding buffer from [3110400/3112960] to [3110400/6221824] bytes.
>>     > [2:ml2:shop] [NTC] [NET] [Jan 21 13:26:45] netcam_rtsp_connect:
>>     Normal
>>     > resolution: Camera (shop) connected
>>     > [2:ml2:shop] [DBG] [NET] [Jan 21 13:26:45] netcam_check_buffsize:
>>     > expanding buffer from [3110400/3112960] to [3110400/6221824] bytes.
>>     > [2:ml2:shop] [CRT] [NET] [Jan 21 13:26:45] motion_init:
>>     Substream not
>>     > available.? Image sizes not modulo 16.
>>     > [4:nc4:shop] [NTC] [NET] [Jan 21 13:26:45] netcam_rtsp_handler:
>>     Normal
>>     > resolution: Camera handler thread [4] started
>>     > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:26:45] image_ring_resize:
>>     Resizing
>>     > pre_capture buffer to 1 items
>>     > [4:nc4:shop] [INF] [NET] [Jan 21 13:26:45]
>>     netcam_rtsp_open_context:
>>     > Normal resolution: Opened camera(shop)
>>     > [3:nc3:roof] [INF] [ENC] [Jan 21 13:26:45] ffmpeg_avcodec_log:
>>     > deprecated pixel format used, make sure you did set range correctly
>>     > [3:nc3:roof] [NTC] [NET] [Jan 21 13:26:45] netcam_rtsp_connect:
>>     Normal
>>     > resolution: Camera (roof) connected
>>     > [1:ml1:roof] [INF] [ALL] [Jan 21 13:26:46] motion_init: Maskfile
>>     > "/home/myname/etc/motion/amcrest_2592x1520mask.pgm" loaded.
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:26:46] image_ring_resize:
>>     Resizing
>>     > pre_capture buffer to 2 items
>>     > [4:nc4:shop] [INF] [ENC] [Jan 21 13:26:47] ffmpeg_avcodec_log:
>>     > deprecated pixel format used, make sure you did set range correctly
>>     > [4:nc4:shop] [NTC] [NET] [Jan 21 13:26:47] netcam_rtsp_connect:
>>     Normal
>>     > resolution: Camera (shop) connected
>>     > [2:ml2:shop] [INF] [ALL] [Jan 21 13:26:49] motion_init: Maskfile
>>     > "/home/myname/etc/motion/amcrest_1920x1080mask.pgm" loaded.
>>     > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:26:49] image_ring_resize:
>>     Resizing
>>     > pre_capture buffer to 2 items
>>     > [1:ml1:roof] [INF] [EVT] [Jan 21 13:30:28] event_new_video:
>>     Source FPS 25
>>     > [1:ml1:roof] [INF] [ENC] [Jan 21 13:30:28] ffmpeg_set_quality:
>>     libx264
>>     > codec vbr/crf/bit_rate: 0
>>     > [1:ml1:roof] [NTC] [EVT] [Jan 21 13:30:28] event_newfile: File
>>     of type
>>     > 8 saved to: /home/myname/motion/roof/videos/20210121-13:30:28.mp4
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:30:28] motion_detected: Motion
>>     > detected - starting event 1
>>     > [1:ml1:roof] [NTC] [EVT] [Jan 21 13:31:28] event_newfile: File
>>     of type
>>     > 1 saved to: /home/myname/motion/roof/stills/20210121-13:30:28.jpg
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:31:28] mlp_actions: End of
>>     event 1
>>     > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:31:56] mlp_actions: End of
>>     event 1
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:31:56] mlp_actions: End of
>>     event 2
>>     > [2:ml2:shop] [NTC] [ALL] [Jan 21 13:31:56] motion_loop: Thread
>>     exiting
>>     > [2:ml2:shop] [INF] [ALL] [Jan 21 13:31:56] motion_cleanup: Calling
>>     > vid_close() from motion_cleanup
>>     > [2:ml2:shop] [INF] [VID] [Jan 21 13:31:56] vid_close: calling
>>     > netcam_rtsp_cleanup
>>     > [2:ml2:shop] [INF] [NET] [Jan 21 13:31:56] netcam_rtsp_cleanup:
>>     Normal
>>     > resolution: Shutting down network camera.
>>     > [1:ml1:roof] [NTC] [ALL] [Jan 21 13:31:56] motion_loop: Thread
>>     exiting
>>     > [1:ml1:roof] [INF] [ALL] [Jan 21 13:31:56] motion_cleanup: Calling
>>     > vid_close() from motion_cleanup
>>     > [1:ml1:roof] [INF] [VID] [Jan 21 13:31:56] vid_close: calling
>>     > netcam_rtsp_cleanup
>>     > [1:ml1:roof] [INF] [NET] [Jan 21 13:31:56] netcam_rtsp_cleanup:
>>     Normal
>>     > resolution: Shutting down network camera.
>>     > [4:nc4:shop] [INF] [NET] [Jan 21 13:31:56] netcam_rtsp_handler:
>>     Normal
>>     > resolution: Handler loop finished.
>>     > [4:nc4:shop] [INF] [NET] [Jan 21 13:31:56] netcam_rtsp_handler:
>>     netcam
>>     > camera handler: finish set, exiting
>>     > [3:nc3:roof] [INF] [NET] [Jan 21 13:31:56] netcam_rtsp_handler:
>>     Normal
>>     > resolution: Handler loop finished.
>>     > [3:nc3:roof] [INF] [NET] [Jan 21 13:31:56] netcam_rtsp_handler:
>>     netcam
>>     > camera handler: finish set, exiting
>>     > [2:ml2:shop] [NTC] [NET] [Jan 21 13:31:57] netcam_rtsp_cleanup:
>>     Normal
>>     > resolution: Shut down complete.
>>     > [1:ml1:roof] [NTC] [NET] [Jan 21 13:31:57] netcam_rtsp_cleanup:
>>     Normal
>>     > resolution: Shut down complete.
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:31:58] main: Threads finished
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:31:58] main: Motion terminating
>>     > [0:motion] [DBG] [ALL] [Jan 21 13:31:58] dbse_global_deinit:
>>     Closing
>>     > MYSQL
>>     > [0:motion] [NTC] [ALL] [Jan 21 13:31:58] motion_remove_pid:
>>     Closing
>>     > logfile (/home/myname/etc/motion/motion.log).
>>     >
>>     > $ cat /home/myname/etc/motion/amcrest_{roof,shop}.conf
>>     >
>>     #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>     > # /home/myname/etc/motion/amcrest_roof.conf
>>     > #
>>     > # This config file was generated by motion 4.3.2
>>     > # at 2020-11-19T12:52:49
>>     >
>>     > # User defined name for the camera.
>>     > camera_name roof
>>     > camera_id 0
>>     > framerate 30
>>     >
>>     > # Target directory for pictures, snapshots and movies
>>     > target_dir /home/myname/motion/roof
>>     >
>>     > # The full URL of the network camera stream.
>>     > netcam_url
>>     >
>>     rtsp://user:passwd@192.168.1.4:4554/cam/realmonitor?channel=1&subtype=0
>>     >
>>     > ############################################################
>>     > # Image Processing configuration parameters
>>     > ############################################################
>>     >
>>     > # Image width in pixels.
>>     > width 2592
>>     >
>>     > # Image height in pixels.
>>     > height 1520
>>     >
>>     > # Draw a locate box around the moving object.
>>     > locate_motion_mode on
>>     >
>>     > # Set the look and style of the locate box.
>>     > locate_motion_style redbox
>>     >
>>     > # Text to be overlayed in the lower left corner of images
>>     > ;text_left amcrest_roof 0
>>     >
>>     > # Enable tuning of the threshold down if possible.
>>     > ;threshold_tune on
>>     >
>>     > # Full path and file name for motion detection mask PGM file.
>>     > mask_file /home/myname/etc/motion/amcrest_2592x1520mask.pgm
>>     >
>>     > # File name(without extension) for pictures relative to target
>>     directory
>>     > picture_filename stills/%Y%m%d-%H:%M:%S
>>     >
>>     > # File name(without extension) for movies relative to target
>>     directory
>>     > movie_filename videos/%Y%m%d-%H:%M:%S
>>     >
>>     #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>     >
>>     >
>>     #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>     > # /home/myname/etc/motion/amcrest_shop.conf
>>     > #
>>     > # This config file was generated by motion 4.3.2
>>     > # at 2020-11-19T12:52:49
>>     >
>>     >
>>     > # User defined name for the camera.
>>     > camera_name shop
>>     > camera_id 1
>>     > framerate 30
>>     >
>>     > # Target directory for pictures, snapshots and movies
>>     > target_dir /home/myname/motion/shop
>>     >
>>     > # The full URL of the network camera stream.
>>     > netcam_url
>>     >
>>     rtsp://user:passwd@192.168.1.8:4555/cam/realmonitor?channel=1&subtype=0
>>     >
>>     > ############################################################
>>     > # Image Processing configuration parameters
>>     > ############################################################
>>     >
>>     > # Image width in pixels.
>>     > width 1920
>>     >
>>     > # Image height in pixels.
>>     > height 1080
>>     >
>>     > # Draw a locate box around the moving object.
>>     > locate_motion_mode on
>>     >
>>     > # Set the look and style of the locate box.
>>     > locate_motion_style redbox
>>     >
>>     > # Text to be overlayed in the lower left corner of images
>>     > ;text_left amcrest_shop 1
>>     >
>>     > # Enable tuning of the threshold down if possible.
>>     > ;threshold_tune on
>>     >
>>     > # Full path and file name for motion detection mask PGM file.
>>     > mask_file /home/myname/etc/motion/amcrest_1920x1080mask.pgm
>>     >
>>     > # File name(without extension) for pictures relative to target
>>     directory
>>     > picture_filename stills/%Y%m%d-%H:%M:%S
>>     >
>>     > # File name(without extension) for movies relative to target
>>     directory
>>     > movie_filename videos/%Y%m%d-%H:%M:%S
>>     >
>>     #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
>>     >
>>     >
>>     >
>>     > _______________________________________________
>>     > Motion-user mailing list
>>     > Motion-user@lists.sourceforge.net
>>     > https://lists.sourceforge.net/lists/listinfo/motion-user
>>     > https://motion-project.github.io/
>>     >
>>     > Unsubscribe:
>>     https://lists.sourceforge.net/lists/options/motion-user
>>
>>     _______________________________________________
>>     Motion-user mailing list
>>     Motion-user@lists.sourceforge.net
>>     https://lists.sourceforge.net/lists/listinfo/motion-user
>>     https://motion-project.github.io/
>>
>>     Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>>
>>
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> Motion-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe:https://lists.sourceforge.net/lists/options/motion-user
>
>
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...

------------------------------



------------------------------

Subject: Digest Footer

_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user


------------------------------

End of Motion-user Digest, Vol 175, Issue 25
********************************************

Reply via email to