Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: raspberry pi libcamera motion bulseye (tosiara)
2. Re: Making cheap IP Camera work with motion (Henk Demper)
----------------------------------------------------------------------
Message: 1
Date: Mon, 15 Nov 2021 12:00:57 +0200
From: tosiara <tosi...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] raspberry pi libcamera motion bulseye
Message-ID:
<CACHTdwSn48q7H8Nvd4ukBtee=wqgven640cfpupuvk1fgdi...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Maybe it is not motion, bet Raspberry changed something in the new OS image
I don't know what is FOV on pi camera and how motion can control it
On Sun, Nov 14, 2021 at 6:32 PM Ed Kapitein via Motion-user
<motion-user@lists.sourceforge.net> wrote:
>
> Hi,
>
>
> I own a raspberry pi 3B+ and a camera v2 NOIR and use motion.
>
> After upgrading to bullseye i had and have some difficulties to use motion.
>
> For me it does not work "out of the box"
>
> I needed to rename the existing cameraX-dist.conf to something else then
> .conf to get motion working.
>
> And when using /dev/video0 the FOV is smaller than it should be.
>
> I assume the documentation needs an update.
>
> Motion *is* working, but i assume that with libcamera there is need of
> working examples of config files with the available raspberry pi camera's.
>
>
> Could someone please add a dedicated section for the raspberry pi and
> the well known camera's, so we can continue to use motion with the new
> setup?
>
> Let me know if i can test anything!
>
>
> Kind regards,
>
> Ed
>
>
>
>
>
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
------------------------------
Message: 2
Date: Mon, 15 Nov 2021 11:06:14 +0100
From: Henk Demper <henk_dem...@hotmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Making cheap IP Camera work with motion
Message-ID:
<as8pr10mb43738ffc9b2290a553f0ccea93...@as8pr10mb4373.eurprd10.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
...the suggested RTSP URL would only work if port 554 is open, conflicting with:
>> A scan with nmap shows that port 80 seems to be the only one open.
If the latter is correct, and only port 80 is open, then RTSP on port 554 will
obviously fail...
Henk Demper
> On 15 Nov 2021, at 10:27, Henk Demper <henk_dem...@hotmail.com> wrote:
>
> Hi Giampiero,
>
> I have a bunch of different brand/model, cheap $15-$25 HD cameras from
> AliExpress and although not documented from the box, they all work (after
> some experimenting indeed with ONVIF as Andr? suggests & web searches),
> returning a RTSP HD stream using:
>
> netcam_url
> rtsp://<IPAddress>:554/user=admin&password=<Password>&channel=1&stream=0.sdp?real_stream
>
> You can also get still images off (I use with wget in home automation) in SD
> quality using:
>
>
> http:/<IPAddress>/webcapture.jpg?user=admin&password=<Password>&command=snap&chanel=1
>
> Notice the exact spelling (like 'chanel') ;-)
>
> You might give those a try ?
>
> Henk Demper
>
>> On 15 Nov 2021, at 2:24, Andr? H?nsel <an...@webkr.de
>> <mailto:an...@webkr.de>> wrote:
>>
>> Try connecting to it with ONVIF Device Manager. I will probably support
>> ONVIF and you can get the RTSP URL from it.
>>
>> From: Giampiero Campa [mailto:giampiero.ca...@gmail.com
>> <mailto:giampiero.ca...@gmail.com>]
>> Sent: Montag, 15. November 2021 02:17
>> To: Motion-user@lists.sourceforge.net
>> <mailto:Motion-user@lists.sourceforge.net>
>> Subject: [Motion-user] Making cheap IP Camera work with motion
>>
>> Hi All,
>>
>> I have a cheap IP camera that used to work with an iphone app which has been
>> removed from the app store last year or so.
>>
>> Recently I played with it a bit and noticed that you can connect to it (and
>> access the settings) via http. You can see a pretty good live image using
>> http://192.168.1.111/video/livesp.asp <http://192.168.1.111/video/livesp.asp>
>>
>> Unfortunately I do not have much information about the formats it supports.
>> If you go to the settings the only information is as follows:
>>
>> Device SN
>> V200
>> Hardware Version
>> 2.0
>> Firmware Version
>> 1.9.8
>> UID
>> CM4F5B-38A550D4CF04-74B359
>> Lan MAC
>> WiFi MAC
>> b8:0c:0a:0c:01:cf
>> There is a QR code on it but if i scan it it only brings up the UID above. A
>> search for it does not find anything. A scan with nmap shows that port 80
>> seems to be the only one open.
>>
>> I have been able to use motion previously with both a built-in and a USB
>> camera, with excellent results (thanks), but I haven't been able to make it
>> work with this IP camera.
>>
>> I have tried stuff like the following in the config file:
>>
>> netcam_url http://admin:adminpwd@192.168.1.101/video/livesp.asp
>> <http://admin:adminpwd@192.168.1.101/video/livesp.asp>
>> netcam_url http://192.168.1.101/video/livesp.asp?user=admin&pwd=adminpwd
>> <http://192.168.1.101/video/livesp.asp?user=admin&pwd=adminpwd>
>> netcam_keepalive on
>>
>> But it cannot connect. I do not know what format it supports. I have tried
>> to access it using rtsp://, rtmp:// and more but no success.
>>
>> Any clue to what I could do or try?
>>
>> Thanks a lot in advance.
>> Giampiero
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> Motion-user@lists.sourceforge.net <mailto:Motion-user@lists.sourceforge.net>
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> <https://lists.sourceforge.net/lists/listinfo/motion-user>
>> https://motion-project.github.io/ <https://motion-project.github.io/>
>>
>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>> <https://lists.sourceforge.net/lists/options/motion-user>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 185, Issue 9
*******************************************
