Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Wrong Video Duration since upgrade to motion 4.5 (tosiara)
----------------------------------------------------------------------
Message: 1
Date: Sun, 18 Dec 2022 21:00:05 +0200
From: tosiara <tosi...@gmail.com>
To: Motion discussion list <motion-user@lists.sourceforge.net>
Subject: Re: [Motion-user] Wrong Video Duration since upgrade to
motion 4.5
Message-ID:
<CACHTdwSpvbUG7mKh=r=uBZiJFY-rYeaeN4W3-0p7RKDtx=q...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
We could only try to help if Arvid could get full debug log from the
beginning (-d 9) while reproducing the issue and a corresponding movie file
Without that it is really hard to tell anything
On Sat, Dec 17, 2022, 23:26 MrDave <motionmrd...@gmail.com> wrote:
> Just to wrap this one up for me, I have absolutely no idea how something
> like this could occur.
>
> On 12/15/2022 10:14 AM, Arvid Ihnen via Motion-user wrote:
>
> Hi,
> many thanks for trying to reproduce the issue.
> I did some further investigations and figured out two things.
>
> 1) For ever recording I wrote the approximate duration into the SQL
> database using the following configuration:
> sql_query_stop UPDATE motion SET length = timestampdiff(SECOND,
> time_stamp, '%Y-%m-%d %T')*1000,time_stamp_end = '%Y-%m-%d %T' WHERE
> filename = '%f'
>
> For some recordings the length is also about 42minutes too high. The
> recordings with the wrong Duration and the one with the wrong entry in the
> database are not always the same.
>
>
> 2) Looking at the logfile it shows that every "ERR" entry is also about 42
> minutes too high. How is this possible?
>
> [9:nc9:Tor] [NTC] [NET] [Dec 15 17:11:03] netcam_rtsp_connect: norm:
> Camera (Tor) connected
> [9:nc9:Tor] [NTC] [NET] [Dec 15 17:11:03] netcam_rtsp_connect: norm:
> Unable to determine the camera source FPS.
> [8:nc8:Katzenloch] [NTC] [NET] [Dec 15 17:11:03] netcam_rtsp_connect:
> norm: Camera (Katzenloch) connected
> [9:nc9:Tor] [ERR] [NET] [Dec 15 17:54:10] netcam_rtsp_handler_reconnect:
> norm: Reconnecting with camera....
> [7:nc7:Garten] [ERR] [NET] [Dec 15 17:54:10]
> netcam_rtsp_handler_reconnect: norm: Reconnecting with camera....
> [7:nc7:Garten] [NTC] [NET] [Dec 15 17:12:03] netcam_rtsp_connect: norm:
> Camera (Garten) connected
> [9:nc9:Tor] [NTC] [NET] [Dec 15 17:12:03] netcam_rtsp_connect: norm:
> Camera (Tor) connected
> [9:nc9:Tor] [NTC] [NET] [Dec 15 17:12:03] netcam_rtsp_connect: norm:
> Unable to determine the camera source FPS.
> [7:nc7:Garten] [ERR] [NET] [Dec 15 17:55:10]
> netcam_rtsp_handler_reconnect: norm: Reconnecting with camera....
> [9:nc9:Tor] [ERR] [NET] [Dec 15 17:55:10] netcam_rtsp_handler_reconnect:
> norm: Reconnecting with camera....
> [7:nc7:Garten] [NTC] [NET] [Dec 15 17:13:03] netcam_rtsp_connect: norm:
> Camera (Garten) connected
> [9:nc9:Tor] [NTC] [NET] [Dec 15 17:13:03] netcam_rtsp_connect: norm:
> Camera (Tor) connected
> [9:nc9:Tor] [NTC] [NET] [Dec 15 17:13:03] netcam_rtsp_connect: norm:
> Unable to determine the camera source FPS.
> [1:ml1:Garten] [NTC] [ALL] [Dec 15 17:13:16] motion_detected: Motion
> detected - starting event 28.
> [1:ml1:Garten] [WRN] [DBL] [Dec 15 17:13:16] dbse_firstmotion: Ignoring
> empty sql query
> [1:ml1:Garten] [NTC] [EVT] [Dec 15 17:13:16] event_newfile: Writing movie
> to file: /motion/new/Garten/20221215171315.mp4
> [7:nc7:Garten] [ERR] [NET] [Dec 15 17:56:10]
> netcam_rtsp_handler_reconnect: norm: Reconnecting with camera....
> [7:nc7:Garten] [NTC] [NET] [Dec 15 17:14:03] netcam_rtsp_connect: norm:
> Camera (Garten) connected
> [1:ml1:Garten] [NTC] [EVT] [Dec 15 17:14:29] event_newfile: Writing image
> to file: /motion/new/Garten/20221215171346.jpg
> [1:ml1:Garten] [NTC] [ALL] [Dec 15 17:14:29] mlp_actions: End of event 28
> [1:ml1:Garten] [NTC] [ALL] [Dec 15 17:14:31] motion_detected: Motion
> detected - starting event 29.
> [1:ml1:Garten] [WRN] [DBL] [Dec 15 17:14:31] dbse_firstmotion: Ignoring
> empty sql query
> [1:ml1:Garten] [NTC] [EVT] [Dec 15 17:14:31] event_newfile: Writing movie
> to file: /motion/new/Garten/20221215171430.mp4
> [7:nc7:Garten] [ERR] [NET] [Dec 15 17:57:10]
> netcam_rtsp_handler_reconnect: norm: Reconnecting with camera....
> [1:ml1:Garten] [NTC] [EVT] [Dec 15 17:15:02] event_newfile: Writing image
> to file: /motion/new/Garten/20221215171431.jpg
>
> Best Regards
> Stefan
>
> Am 15.12.2022 um 03:27 schrieb MrDave <motionmrd...@gmail.com>:
>
> Just a FYI that I am unable to reproduce this issue. All durations are
> reported correctly.
> On 12/14/2022 12:11 AM, Arvid Ihnen via Motion-user wrote:
>
> HI,
> thanks for your replies.
>
> @Tony: Not sure what the viewing of the video has to do with the
> generation?
>
> @MrDave: Here is the (hopefully) relevant part of the configuration:
> minimum_frame_time 0
> movie_max_time 0
> movie_output on
> movie_bps 400000
> movie_quality 60
> movie_codec mp4
> timelapse_codec mpg
> movie_duplicate_frames off
> movie_extpipe_use off
> framerate 25
> width 1920
> height 1080
>
> As far as understood, it is encoded.
>
> Best Regards
> Stefan
>
> Am 14.12.2022 um 00:55 schrieb MrDave <motionmrd...@gmail.com>:
>
> Is this via the passthrough option or encoded?
>
>
> On 12/13/2022 4:46 PM, Tony wrote:
>
> My suggestion is to observe the output of "top" for excessive cpu usage
> while viewing the mp4
>
> On Dec 13, 2022 14:58, Arvid Ihnen via Motion-user
> <motion-user@lists.sourceforge.net> <motion-user@lists.sourceforge.net>
> wrote:
>
> Hi,
> I just upgraded my docker based motion system from 4.3.1 to 4.5.0. Since
> then some of the videos shows a wrong duration. Attached is an example of
> the mediainfo output of a captured video, which is in reality about 50
> seconds long:
>
> General
> Complete name : 20221213150454.mp4
> Format : MPEG-4
> Format profile : Base Media
> Codec ID : isom (isom/iso2/avc1/mp41)
> File size : 9.02 MiB
> Duration : 42 min 16 s
> Overall bit rate : 29.8 kb/s
> Writing application : Lavf57.83.100
>
> Video
> ID : 1
> Format : AVC
> Format/Info : Advanced Video Codec
> Format profile : Baseline@L4
> Format settings : 1 Ref Frames
> Format settings, CABAC : No
> Format settings, Reference frames : 1 frame
> Format settings, GOP : M=1, N=12
> Codec ID : avc1
> Codec ID/Info : Advanced Video Coding
> Duration : 42 min 16 s
> Bit rate : 11.9 Mb/s
> Width : 1 920 pixels
> Height : 1 080 pixels
> Display aspect ratio : 16:9
> Frame rate : 25.000 FPS
> Color space : YUV
> Chroma subsampling : 4:2:0
> Bit depth : 8 bits
> Scan type : Progressive
> Bits/(Pixel*Frame) : 0.230
> Stream size : 9.02 MiB (100%)
> Writing library : x264 core 152 r2854 e9a5903
> Encoding settings : cabac=0 / ref=1 / deblock=0:0:0
> / analyse=0:0 / me=dia / subme=0 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=0 /
> me_range=16 / chroma_me=1 / trellis=0 / 8x8dct=0 / cqm=0 / deadzone=21,11 /
> fast_pskip=1 / chroma_qp_offset=0 / threads=4 / lookahead_threads=4 /
> sliced_threads=1 / slices=4 / nr=0 / decimate=1 / interlaced=0 /
> bluray_compat=0 / constrained_intra=0 / bframes=0 / weightp=0 / keyint=12 /
> keyint_min=1 / scenecut=0 / intra_refresh=0 / rc=crf / mbtree=0 / crf=20.0
> / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=0
> Codec configuration box : avcC
>
> I did not change any configuration parameter from 4.3.1 to 4.5.0. When
> playing the video (almost) the last frame is displayed for the remaining
> time. Any idea?
>
> Many thanks for your help!
>
>
>
>
> _______________________________________________
> Motion-user mailing
> listMotion-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/motion-userhttps://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
>
>
> _______________________________________________
> Motion-user mailing
> listMotion-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/motion-userhttps://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
>
>
> _______________________________________________
> Motion-user mailing
> listMotion-user@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/motion-userhttps://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
> _______________________________________________
> Motion-user mailing list
> Motion-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 196, Issue 19
********************************************
