Send Motion-user mailing list submissions to
motion-user@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
motion-user-requ...@lists.sourceforge.net
You can reach the person managing the list at
motion-user-ow...@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Recording Skip (Barry Martin)
----------------------------------------------------------------------
Message: 1
Date: Tue, 13 May 2025 17:20:03 -0500
From: Barry Martin <barry3mar...@gmail.com>
To: motion-user@lists.sourceforge.net
Subject: Re: [Motion-user] Recording Skip
Message-ID: <b8676844-8e1b-4d11-8014-3ba524f84...@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Hi Folks!
I think this is the much-awaited conclusion to my inquiry about
skipping.recording glitches,
Original:??? 2x Raspberry Pi 4, via built-in 5G, with one USB camera
each; record to a NAS.? Using Motion Version 4.5.1. Powered by official
wall warts plugged in to a small UPS.
No problems detected with the WiFi signal, recording media,
Changes, updates.? Raspberry Pi's now using a PoE HAT.? I also
physically switched the PI's but ":should be' the same as the
originals.? Also switched the recorded file site from a hard drive on
the NAS to a Raspberry Pi 5 with NVMe storage.? Switching to solid state
storage didn't seem to make any difference.? Switching to wired data
transfer (PoE) maybe made a little difference -- slightly better:
glitches maybe half as long.
The last change I made was to slightly overclock one of the RPi4's --
the one with the definite glitches.
??? /boot/firmware/config.txt
??? #1.8 GHz to 1.9 GHz
??? arm_freq=1900
??? over_voltage_delta=25000
The 'over voltage delta' is the new/preferred command over the previous
overvoltage (with Bookworm, anyway).
I might overclock the other Pi later.
So the good news is the glitching seems to be all but eliminated: only
getting a few short-duration glitches, approximately a half-second.?
Immensely improved over the two- to sometimes ten second skips previously.
Thanks to all providing hints!
Barry
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
Motion-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 222, Issue 5
*******************************************
