Hi. Archimedes Gaviola wrote: > Hi! How to determine regular PPP users from users that are intended for > PPP/L2TP tunnel?
If you mean mpd as LAC then there is completely different configuration for LAC then for LNS. Read manual about mpd's repeater functionality. > How can we configure it using MPD especially on LAC? Instead of new Bund1 Link1 you should use rnew Rep1 Link1 Link2 . This will create repeater to repeat Link1 (as example serial or PPPoE or any other) as Link2 (L2TP or PPTP or any other). Look manual. Note, repeater functionality currently present only in CVS version. > Can we use RADIUS authentication when MPD is configured as an L2TP access > concentrator (LAC) or just for L2TP network server (LNS)? LAC does not have usual PPP authentication subsystem, so there is nothing to authenticate. If you mean special RFC (can't recall number) about RADIUS in LAC case, then no, it is not supported. > Is there a way we can configure local AAA on MPD just like Cisco? To use Disconnect Request, Packet of Disconnect and other? For this time no, libradius does not have server capabilities. May be later. -- Alexander Motin [EMAIL PROTECTED] Optima Telecom ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Mpd-users mailing list Mpd-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mpd-users
