Hi Johann, I applied the patch "2.4.23-3" and also passing option as card=23 buf still i'm getting same error
What will be going wrong? Thanks in Advance, nimeesh ----- Original Message ----- From: "Johann Hanne" <[EMAIL PROTECTED]> To: "nimeesh" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, January 07, 2004 5:01 PM Subject: [mpeg2] Re: problem with setting module option and some audio error > Hi nimeesh, > > you should make sure that you use the latest patch from > http://bytesex.org/patches/2.4.23-4/patch-2.4.23-kraxel.gz > as this includes a patch to the card information which is required to get > audio to work with the BMK MPEX card w/ tuner. > > The correct option is "card=23". I also get the "audio carrier scan failed" > message, but the default of 5.5 MHz works fine for me. After loading the > driver you have to tune to a channel before using /dev/video{0,1}, otherwise > you get invalid argument or input/output error. To do the tuning you might > use the xawtv package. You can scan the channels with scantv (which is only > built if you install zvbi from http://zapping.sourceforge.net/ before > compiling xawtv) and switch channels with fbtv (requires a working > framebuffer setup) or xawtv/v4lctl (both requires X libs to compile which is > stupid for v4lctl, as this is a command line tool :-(). > > After that you get a beautiful MPEG2 TS stream from /dev/video1. The drivers > are rock stable, I've been reading the stream and multicasting it for more > than 4 weeks now without any problem. > > Cheers, Jonny > > On Tuesday 06 January 2004 13:58, nimeesh wrote: > > Hi, > > > > I tried to use BMK MPEX board with Tunner on linux with Kernel 2.4.23 and > > module version of saa7134 is 0.2.9 . > > > > i'm able compile the module and it is getting installed but it is giving > > error like > > "saa7134[0]/audio: audio carrier scan failed. using 5.500 MHZ [default]" > > what is means ?? > > is i'm missing out any thing?? > > > > after this with video device file when i try to read data... > > with no card option given and with card option=18,23 for module saa7134 > > "cat /dev/video0" gives error as "invalid argument" > > and with "cat /dev/video1" it gives error as "Input/Output Error" > > > > with card option=22.. > > device video1 gives error as "no such device" while video0 is giving same > > error. > > > > how to configure input source like S-Video, Composite or Tunner??? > > > > Thanks in advance, > > nimeesh > > >
