Found the problem , I deleted configure , ran autoreconf , and the new configure had the latest 1.2.2 , never had a problem with configure not updating before . Just tried it again , and it happens all the time. Does your autotools update the version number on configure for the current SVN rev 2206
On Tuesday 28 July 2009 21:52:44 Jason Moxham wrote: > I tried that , but no joy , I tend to use > > Usage: /usr/bin/autoreconf [OPTION] ... [DIRECTORY] ... > > Run `autoconf' (and `autoheader', `aclocal', `automake', `autopoint' > (formerly `gettextize'), and `libtoolize' where appropriate) > repeatedly to remake the GNU Build System files in specified > DIRECTORIES and their subdirectories (defaulting to `.'). > > I couldn't find any 1.2.1 that needed changing , perhaps its in a split > format ie a 1 , a 2 , a 1 , that will be difficult to find > > On Tuesday 28 July 2009 21:37:29 Bill Hart wrote: > > This sequence before make dist is critical. > > > > aclocal > > autoheader > > autoconf > > automake > > ./configure > > > > Dunno if it is the right order though, so I run everything more than > > once to make sure. > > > > I suppose if that doesn't work you can grep for 1.2.1 and see what > > hasn't changed. The main place to change it is at the bottom of > > gmp-h.in. Then one or more of the above in the right order are suppose > > to update it in all the right places. > > > > Bill. > > > > 2009/7/28 Jason Moxham <[email protected]>: > > > On Tuesday 28 July 2009 15:10:30 Bill Hart wrote: > > >> Check out trunk into an appropriately named directory on sage.math > > >> Edit NEWS with all new features and improvements > > >> Edit ChangeLog with new release date > > >> Edit AUTHORS file with their new contributions > > >> Edit version number in gmp-h.in > > >> Update soname stuff in Makefile.am (1.2.3->1.2.4 need to take rev > > >> number from 1.2.3 not from trunk) > > >> Update doc/version.texi with version and dates > > >> makeinfo version.texi > > >> makeinfo mpir.texi > > >> update build.vc9/config.* with version number in each file > > >> aclocal > > >> autoheader > > >> autoconf > > >> automake > > >> ./configure > > >> check lots of makefiles, configure and config.h have been altered > > >> check everything in to svn > > >> make dist > > > > > > Done all that , but I still get mpir-1.2.1.tar.gz , there is still a > > > missing one or something > > > > > > By the way I notice we dont put bug fixes in NEW/Changelog , so I > > > havent bothered either > > > > > >> 2009/7/28 Jason Moxham <[email protected]>: > > >> > configure has version string still at 1.2.1 , but I cant see where > > >> > it comes from. > > >> > > > >> > On Tuesday 28 July 2009 01:44:38 Jason Moxham wrote: > > >> >> On Tuesday 28 July 2009 01:15:33 Jason Moxham wrote: > > >> >> > On Tuesday 28 July 2009 01:02:09 Bill Hart wrote: > > >> >> > > Yes, we can issue 1.2.2, but not from trunk. There's too much > > >> >> > > broken stuff in there at present. If you apply the patches to > > >> >> > > the 1.2.x branch. Do you want to do the honours. > > >> >> > > > >> >> > Ok , I just want to test it on a sun box , and a couple of other > > >> >> > systems, it was a trivial fix , so it shouldn't of broke anything > > >> >> > else (thats the kiss of doom , putting it in writing) . > > >> >> > No other fixes worth putting in? > > >> >> > Not sure I can fix the docs , my latex is broken , or was. > > >> >> > > >> >> I can't find all the references to mpir version numbers? scooby-doo > > >> >> where are you? , havent done the tests yet , have to sleep now , > > >> >> will finish tomorrow > > >> >> > > >> >> > > Once there's a tarball, I can upload it. Actually you should > > >> >> > > have access, but I don't think you do. > > >> >> > > > > >> >> > > Bill. > > >> >> > > > > >> >> > > 2009/7/28 Jason Moxham <[email protected]>: > > >> >> > > > I've Fixed this in trunk SVN , and this also fixes the extra > > >> >> > > > requirement of make install-gmpcompat , we dont require it > > >> >> > > > anymore. We can issue a mpir-1.2.2 ? > > >> >> > > > > > >> >> > > > On Monday 27 July 2009 23:07:27 Jason Moxham wrote: > > >> >> > > >> The problem is this , when we install libgmpxx we have to > > >> >> > > >> relink it against libgmp and libgmp is not installed yet . > > >> >> > > >> For libmpir this is not a problem as libtool knows this is > > >> >> > > >> the library we are installing and so looks elsewhere for the > > >> >> > > >> library. For libgmp , libtool doesn't know this ( and we > > >> >> > > >> couldn't figure out how to tell it) , so the install fails > > >> >> > > >> with libgmpxx , but on other unices it does get as far as > > >> >> > > >> installing libgmp , so a second attempt at installation is > > >> >> > > >> successful(and this is what we do at the mo) . For some > > >> >> > > >> reason bsd does the libgmp and libgmpxx as a pair and if > > >> >> > > >> libgmpxx fails then libgmp is not installed either. If I > > >> >> > > >> install libgmp manualy , then we can install libgmpxx as > > >> >> > > >> normal. > > >> >> > > >> > > >> >> > > >> On Monday 27 July 2009 15:40:12 Jason Moxham wrote: > > >> >> > > >> > Hi , I'll give it go > > >> >> > > >> > > > >> >> > > >> > My guess is that this is what is wrong > > >> >> > > >> > > > >> >> > > >> > ./configure blah --enable-gmpcompat > > >> >> > > >> > test ret code > > >> >> > > >> > make > > >> >> > > >> > test ret code > > >> >> > > >> > make install > > >> >> > > >> > test ret code > > >> >> > > >> > # this can return a fail , but for gmp-compat we have to > > >> >> > > >> > ignore it make install-gmpcompat > > >> >> > > >> > test ret code > > >> >> > > >> > > > >> >> > > >> > Jason > > >> >> > > >> > > > >> >> > > >> > On Monday 27 July 2009 14:24:41 William Stein wrote: > > >> >> > > >> > > Hi, > > >> >> > > >> > > > > >> >> > > >> > > Do of you mpir devs want to try to debug that Sage fails > > >> >> > > >> > > to build on FreeBSD because of MPIR? I can give you an > > >> >> > > >> > > account on the relevant freebsd box. > > >> >> > > >> > > > > >> >> > > >> > > William > > >> >> > > >> > > > > >> >> > > >> > > > > >> >> > > >> > > ---------- Forwarded message ---------- > > >> >> > > >> > > From: Minh Nguyen <[email protected]> > > >> >> > > >> > > Date: Mon, Jul 27, 2009 at 3:41 AM > > >> >> > > >> > > Subject: [sage-devel] status of FreeBSD 64-bit support > > >> >> > > >> > > To: [email protected] > > >> >> > > >> > > > > >> >> > > >> > > > > >> >> > > >> > > > > >> >> > > >> > > Hi folks, > > >> >> > > >> > > > > >> >> > > >> > > As of Sage 4.1.1.alpha1, the compilation of Sage now > > >> >> > > >> > > dies when it comes to compiling MPIR. The full log is up > > >> >> > > >> > > at > > >> >> > > >> > > > > >> >> > > >> > > http://sage.math.washington.edu/home/mvngu/patch/install > > >> >> > > >> > >-f ree bsd 64 .l og > > >> >> > > >> > > > > >> >> > > >> > > Here's a relevant snippet from my attempt: > > >> >> > > >> > > > > >> >> > > >> > > /usr/local/bin/bash ./libtool --mode=install > > >> >> > > >> > > /usr/bin/install -c 'libgmpxx.la\ ' > > >> >> > > >> > > '/usr/scratch/mvngu/sage-4.1.1.alpha1/local/lib/libgmpxx > > >> >> > > >> > >.l a' libtool: install: warning: relinking `libgmpxx.la' > > >> >> > > >> > > (cd > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4/s rc; /usr/local\ /bin/bash ./libtool --tag=CXX > > >> >> > > >> > > --mode=relink g++ -O2 -m64 -march=k8 -mtune=k8 -\ o > > >> >> > > >> > > libgmpxx.la -rpath > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/local/lib > > >> >> > > >> > > -version-in\ fo 4:4:1 dummy.lo cxx/isfuns.lo > > >> >> > > >> > > cxx/ismpf.lo cxx/ismpq.lo cxx/ismpz.lo cxx/ismp\ znw.lo > > >> >> > > >> > > cxx/osdoprnti.lo cxx/osfuns.lo cxx/osmpf.lo cxx/osmpq.lo > > >> >> > > >> > > cxx/osmpz.lo li\ bgmp.la ) g++ -shared -nostdlib > > >> >> > > >> > > /usr/lib/crti.o /usr/lib/crtbeginS.o .libs/dummy.o > > >> >> > > >> > > cxx/.\ libs/isfuns.o cxx/.libs/ismpf.o cxx/.libs/ismpq.o > > >> >> > > >> > > cxx/.libs/ismpz.o cxx/.libs/i\ smpznw.o > > >> >> > > >> > > cxx/.libs/osdoprnti.o cxx/.libs/osfuns.o > > >> >> > > >> > > cxx/.libs/osmpf.o cxx/.libs/o\ smpq.o cxx/.libs/osmpz.o > > >> >> > > >> > > -Wl,--rpath -Wl,/usr/scratch/mvngu/sage-4.1.1.alpha1/\ > > >> >> > > >> > > local/lib > > >> >> > > >> > > -L/usr/scratch/mvngu/sage-4.1.1.alpha1/local/lib -lgmp > > >> >> > > >> > > -L/usr/lib -ls\ tdc++ -lm -lc -lgcc_s > > >> >> > > >> > > /usr/lib/crtendS.o /usr/lib/crtn.o -m64 -march=k8 > > >> >> > > >> > > -mtune\ =k8 -Wl,-soname -Wl,libgmpxx.so.4 -o > > >> >> > > >> > > .libs/libgmpxx.so.4 /usr/bin/ld: cannot find -lgmp > > >> >> > > >> > > libtool: install: error: relink `libgmpxx.la' with the > > >> >> > > >> > > above command before ins\ talling it > > >> >> > > >> > > *** Error code 1 > > >> >> > > >> > > > > >> >> > > >> > > Stop in > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4/s rc. *** Error code 1 > > >> >> > > >> > > > > >> >> > > >> > > Stop in > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4/s rc. *** Error code 1 > > >> >> > > >> > > > > >> >> > > >> > > Stop in > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4/s rc. *** Error code 1 > > >> >> > > >> > > > > >> >> > > >> > > Stop in > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4/s rc. Error installing MPIR. > > >> >> > > >> > > > > >> >> > > >> > > real 5m58.954s > > >> >> > > >> > > user 1m55.129s > > >> >> > > >> > > sys 5m52.480s > > >> >> > > >> > > sage: An error occurred while installing mpir-1.2.p4 > > >> >> > > >> > > Please email sage-devel > > >> >> > > >> > > http://groups.google.com/group/sage-devel explaining the > > >> >> > > >> > > problem and send the relevant part of > > >> >> > > >> > > of /usr/scratch/mvngu/sage-4.1.1.alpha1/install.log. > > >> >> > > >> > > Describe your computer, o\ perating system, etc. > > >> >> > > >> > > If you want to try to fix the problem, yourself *don't* > > >> >> > > >> > > just cd to > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4 and type 'make'. Instead type > > >> >> > > >> > > "/usr/scratch/mvngu/sage-4.1.1.alpha1/sage -sh" in order > > >> >> > > >> > > to set all environment variables correctly, then cd to > > >> >> > > >> > > /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg/build/mpir-1.2 > > >> >> > > >> > >.p 4 (When you are done debugging, you can type "exit" to > > >> >> > > >> > > leave the subshell.) > > >> >> > > >> > > *** Error code 1 > > >> >> > > >> > > > > >> >> > > >> > > Stop in /usr/scratch/mvngu/sage-4.1.1.alpha1/spkg. > > >> >> > > >> > > > > >> >> > > >> > > real 6m10.853s > > >> >> > > >> > > user 1m59.821s > > >> >> > > >> > > sys 6m0.205s > > >> >> > > >> > > Error building Sage. > > >> >> > > >> > > > > >> >> > > >> > > -- > > >> >> > > >> > > Regards > > >> >> > > >> > > Minh Van Nguyen > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "mpir-devel" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/mpir-devel?hl=en -~----------~----~----~----~------~----~------~--~---
