Xerxes Avenue south has had a Mpls. water dept. project most all summer. From 
approx., 5300 south to the Crosstown has been a street construction and 
hazard zone. Nothing particularly unreasonable about it; it was an appropriate 
infrastructure improvement. The project involved "lining" the main with plastic 
emulsion (?). Good.

It is most all wrapped up now; except at the corner of 58th and Xerxes. There 
is a condition there that demands proper attention. Let me describe it here 
on The List.

I guess there is still a hole in the street, there. Currently there is a 
"bump-out" and detour at the intersection across, fully, all Northbound lanes. All 
northbound traffic, at the intersection, is literally THRUST into the 
Southbound lanes. Compounded by no forewarning, a slight rise in grade, and cars 
parking on the southbound side, this causes a dangerous game of fast "chicken" to 
be played out continually, without warning any of the participants.

Not surprised, but rather amazed, I witnessed a VERY large moving van, that 
had been Southbound, being removed from the living room of one of the 
brickfront doubles that line the East side of Xerxes on the 5700 block. WOW.

This accident happened about three weeks ago. I believe this large truck 
swung out at the detour, saw that he was fast approaching oncoming traffic and cut 
back hard below the detour. He jumped the curb, flattened a parking sign 
rolled over the front lawn and pierced the brick wall of the house. No one was 
hurt. I have called Barett Lanes office repeatedly but this hazard remains to 
this day.

Shocking.

Keith Reitman   Just passing through   NearNorth

REMINDERS:
1. Think a member has violated the rules? Email the list manager at [EMAIL PROTECTED] 
before continuing it on the list. 
2. Don't feed the troll! Ignore obvious flame-bait.
________________________________

Minneapolis Issues Forum - A City-focused Civic Discussion - Mn E-Democracy
Post messages to: mailto:[EMAIL PROTECTED]
Subscribe, Un-subscribe, etc. at: http://e-democracy.org/mpls

Reply via email to