On Mon, 19 May 2003, Lorenzo Colitti wrote:
>
> It should be enough to pass --enable-ipv6 to cfgmaker and put
> EnableIPv6: yes in mrtg.cfg.
>
> e.g. cfgmaker --enable-ipv6 [EMAIL PROTECTED]:760:4::1]
>
> BUT:
>
>
> You are seeing the bug I mentioned in my email to the list earlier
> today. In all versions, numeric IPv6 addresses work only when you
> specify IPv6 options.
>
> So [EMAIL PROTECTED]:760:4::1]:161 works, [EMAIL PROTECTED]:760:4::1] doesn't.
On my patch numeric IPv6 address (every way) are solved at least for
cfgmaker
But not for mrtg (it crash by reading in the mrtg.cfg the dotted address
).
$data = eval($$rcfg{target}{rou}); at around +405
I had left it stand-by two weeks ago when I saw your patch was beeing
integrated into the 2.10.0pre1.
>
> You can apply this patch, which fixes the bug:
>
> http://www.uniroma3.6net.garr.it/mrtg/patch-mrtg-2.10.0pre1-numericv6
>
Yes , the patch corrects the parser.
, but then I have the same problem
when
I try:
cfgmaker --enable-ipv6 [EMAIL PROTECTED]:618:10:2a03:205:1cff:fe00:1df0]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
--base: IPv6 libraries found, IPv6 enabled.
--base: Get Device Info on [EMAIL PROTECTED]:618:10:2a03:205:1cff:fe00:1df0]:161
SNMP Error:
send_query:
SNMPv1_Session (remote host: "2001:618:10:2a03:205:1cff:fe00:1df0"
[2001:618:10:2a03:205:1cff:fe00:1df0].161)
community: "public"
request ID: 1321553296
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /home/itl/bin/../lib/mrtg2/SNMP_util.pm line 590
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL
PROTECTED]:618:10:2a03:205:1cff:fe00:1df0]:161
at /home/itl/bin/cfgmaker line 766
--base: No response using IPv6 for [EMAIL
PROTECTED]:618:10:2a03:205:1cff:fe00:1df0]:161, trying again using IPv4
SNMP Error:
close: Bad file descriptor
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
and its DNS entry
cfgmaker --enable-ipv6 [EMAIL PROTECTED]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
--base: IPv6 libraries found, IPv6 enabled.
--base: Get Device Info on [EMAIL PROTECTED]:161
SNMP Error:
no response received
SNMPv1_Session (remote host: "lisa.consulintel.euro6ix.org"
[2001:618:10:2a03:205:1cff:fe00:1df0].161)
community: "public"
request ID: -431240907
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /home/itl/bin/../lib/mrtg2/SNMP_util.pm line 590
SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:161
at /home/itl/bin/cfgmaker line 766
--base: No response using IPv6 for [EMAIL PROTECTED]:161, trying again using
IPv4
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Tell me whereis my mistake, please....
--
Unsubscribe mailto:[EMAIL PROTECTED]
Help mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg-developers
