Hi,
Again same thing.
C:\mrtg-2.9.25\bin>perl cfgmaker --global 'WorkDir:
d:\inetpub\wwwroot\mrtg' --output server.cfg [EMAIL PROTECTED]
--base: Get Device Info on [EMAIL PROTECTED]:\inetpub\wwwroot\mrtg'
Error:
can't resolve "d" to IP address
SNMPGET Problem for [EMAIL PROTECTED]:\inetpub\wwwroot\mrtg'
--base: Vendor Id:
--base: Populating confcache
--snpo: Skipping ifName scanning because [EMAIL
PROTECTED]:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ifDescr scanning because [EMAIL
PROTECTED]:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ipAdEntIfIndex scanning because
[EMAIL PROTECTED]:\inetpub\wwwroot\mrtg' does not seem to support it
--snpo: Skipping ifType scanning because [EMAIL
PROTECTED]:\inetpub\wwwroot\mrtg'
does not seem to support it
--snpo: Skipping ifPhysAddress scanning because
[EMAIL PROTECTED]:\inetpub\wwwroot\mrtg' does not seem to support it
--base: Get Interface Info
--base: Walking ifIndex
Error:
can't resolve "d" to IP address
SNMPWALK Problem for [EMAIL PROTECTED]:\inetpub\wwwroot\mrtg'
--base: Walking ifType
Error:
can't resolve "d" to IP address
SNMPWALK Problem for [EMAIL PROTECTED]:\inetpub\wwwroot\mrtg'
--base: Walking ifSpeed
> -----Original Message-----
> From: Brett Marler [SMTP:[EMAIL PROTECTED]
> Sent: Friday, January 10, 2003 3:12 PM
> To: Ravi Kanth Chaganti (IS)
> Cc: '[EMAIL PROTECTED]'
> Subject: Re: [mrtg] Re: Error
>
> Hello Ravi,
>
> > What does this Can't resolve d to IP Address mean?...
> >
> > C:\mrtg-2.9.25\bin>perl cfgmaker [EMAIL PROTECTED] --global 'WorkDir:
> > d:\inetpub\wwwroot\mrtg' --output server.cfg
> I think you have the syntax wrong there. If you run "cfgmaker" without any
>
> options it mentions the correct syntax is:
>
> --
> Usage:
> cfgmaker [options] [EMAIL PROTECTED] [[options] [EMAIL PROTECTED]
> ...]
> --
>
> So your command will need to look like:
>
> --
> C:\mrtg-2.9.25\bin>perl cfgmaker --global 'WorkDir:
> d:\inetpub\wwwroot\mrtg'
> --output server.cfg [EMAIL PROTECTED]
> --
>
> (i.e your supplying [EMAIL PROTECTED] at the start instead of the end)
>
> This should sort out your issues.
>
>
> Regards,
> Brett Marler.
>
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
