I'm using mrtg to query about 7,000 targets every five minutes, or 1,400 a minute.
Average network traffic on my mrtg server is 65 kbps in, 40 kbps out. These are both less than 0.1% of the fast ethernet speed. I doubt that the mrtg traffic on your router or your server will be noticeable. Jerry -----Original Message----- From: Joe [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 14, 2003 9:43 AM To: [EMAIL PROTECTED] Subject: [mrtg] Basic question Hello All, I am new to MRTG. I have configured MRTG and SNMP without problem. I configured MRTG to get information on CISCO router. My doubt is : If i run MRTG in 1 min interval using cron will this choke the router bandwidth. What will be the normal packet size that MRTG receives from router regarding its status.Whether it will cause network traffic Adv Thanks -Joe -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
