Mark, In the reference documentation there is another option.
It's called "growright" Try.... "Options[xyz]: gauge, integer, absolute, growright" regards ============================================ Robert Holley Network Consulting Engineer Global Solutions Engineering Cisco Systems 7025 Kit Creek Road. Research Triangle Park, NC 27709 Phone: +1 919-392-2359 Pager: +1 800-796-7363 pin 100-9187 ============================================ > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Mark Steil > Sent: Monday, January 20, 2003 12:19 PM > To: [EMAIL PROTECTED] > Cc: Mark Steil > Subject: [mrtg] Graphing left to right/right to left. > > > > Hello All, > > First my apologies if this question has been asked before and I > did not see > the answer in the documentation or the list archives-I did look > ;-). In my > config file I added "Options[xyz]: gauge, integer, absolute" and now the > graph starts at the left and moves toward the right. Just the opposite of > the right to left behavior I am accustom to. The question is how > do I make > the graph display in the default manner so it is constant with my other > graphs? > > > Mark Steil > Twin Rivers Valley Communications Inc. > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
