Hi All, I got my mrtg running on windows systems with the graphs but am not sure how to calcucate the bandwidth utilization on this frame WAN link 384Kbps to our remote site.
System: HeadQuarter - HongKong in Maintainer: Description: Serial0/0 ###CID### ifType: frame-relay (32) ifName: Se0/0 Max Speed: 193.0 kBytes/s The daily graph report shows the following report: Max In: 47.6 kB/s (24.7%) Average In: 4885.0 B/s (2.5%) Current In: 1317.0 (0.7%) Max Out: 46.3 kB/s (24.0%) Average In: 6093.0 B/s (3.2%) Current Out: 835.0 B/s (0.4%) The weekly graph report shows the following report: Max In: 46.6 kB/s (23.8%) Average In: 3245.0 B/s (1.7%) Current In: 1371.0 (0.7%) Max Out: 44.5 kB/s (23.1%) Average In: 3359.0 B/s (1.7%) Current Out: 3359.0 B/s (1.7%) When looking at the graphs and the chart draw up to 48.0k on the "bytes per second" and I know this will scale up depend on how much the usage of the line. As I can see from looking at the daily graph, the highest that it can go is 48kbps but it only stay for an hour or so and the rest of graph show at around 12kbps. I am trying to find out was that what the actual ulitization bandwidth usage on the line and not sure what I see above is accurate. Do I have to apply some formula or special calculation method to be able to find out the correct utilization report usage? The one thing I notice was that this WAN line that I'm monitoring is the serial0/0 at the remote site and the MAX Speed shows above does not match with actual line bandwidth itself which in this case is 384Kbps. Any ideas or tips on this would greatly appreciated. Ken. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
