Zeeshan, The 60.0% after the 120.0 calls tells you that 60% of your lines is in use... This percentage is calculated as follows: (Current value from SNMP request) / (MaxBytes value in the MRTG config file) * 100% So if the 60% is not the right number you have to change the Maxbytes line in your config file to the number of lines you have connected to the AS5300
Hth, Jan. -----Original Message----- From: Zeeshan Ahmed [mailto:[EMAIL PROTECTED] Sent: Monday, January 27, 2003 4:52 PM To: [EMAIL PROTECTED] Subject: [mrtg] Percentage in modems graphs? Dear all I make graphs of total modems used in cisco access server AS5300 and graph tell me the total modems used and total modems free and a vale in percentage, nowi dont understand that what is this percentage value for. can you plz tell me her is the copy past of the line. Max calls: 120.0 calls (60.0%) Average calls: 58.0 calls (29.0%) Current calls: 73.0 calls (36.5%) Max Out: 108.0 calls (54.0%) Average Out: 60.0 calls (30.0%) Current Out: 47.0 calls (23.5%) plz look at bold area dn tell me what does it indicate my access server has 120 lines. Regards Zeeshan Ahmed -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
