Yes, kind of. cpmISDNCfgBChanInUseForAnalog is .1.3.6.1.4.1.9.10.19.1.1.2.0. It counts all analog calls on all DS1s.
In the table cpmDS1DS0UsageTable are comparable OIDs for each DS1. For example, cpmDS1ActiveDS0s shows active calls on each DS1. This is actually directly analogous to cpmActiveDS0s, which counts all active calls (not just analog), it isn't broken down by analog, digital, etc. in the table. But, it might serve your purpose. .1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.0 is cpmDS1ActiveDS0s for the first DS1. .1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.1 is cpmDS1ActiveDS0s for the second DS1. Etc. Jerry -----Original Message----- From: Dez Cadena [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 28, 2003 7:34 AM To: [EMAIL PROTECTED] Subject: [mrtg] active analog calls OID question Hey all, Does anyone know if there's asimilar to cpmISDNCfgBChannelsInUseForAnalog(*) OID under ciscoPopMgmtMIB or any other MIBs that counts the active analog calls per DS1 ? -------- * cpmISDNCfgBChannelsInUseForAnalog : The number of configured ISDN B-Channels that are currently occupied by analog calls. tia, -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
