You would need a beastly machine to get it to work. We originally used MRTG to monitor a growing number of Catalyst switches. As the number of switches increased we found it was killing the machine. We were forced to switch to Cricket. We have about the same number of switches ourself now, about 150. Cricket is not as easy to configure but it is much less burdensome on the machine running it.
I would say give MRTG a try, and if the machine's 15 minute load average stays over 2 then switch to Cricket. -james Jonathan P. Tornea wrote: > Hi, > > Am planning to use MRTG to monitor errors, crc and discards on Cat2900 per > interface. Now we have more than 150 24-port switches on the whole > network. Can MRTG scale to this large number of objects to monitor? > Approx more than 3600 objects. Thanks. > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
