Hi James
Thanks for your response ,I have tried putting .0 at the end of
OID and it did not work .
I will email you my mrtg.cfg so that you can put your comments .
Regards
Bhupesh
-----Original Message-----
From: James Overbeck [mailto:[EMAIL PROTECTED]
Sent: Monday, February 03, 2003 11:05 AM
To: [EMAIL PROTECTED]
Subject: [mrtg] Re: Cisco 3660 router
Hello,
It helps to remember that MRTG works like snmpget, not snmpwalk. If
you can
get the numbers you want with snmpget and the OID of your choice, then you
should be able to graph those numbers. Snmpget gives you exactly what you
ask for and nothing else, much like MRTG. Snmpwalk runs through all the
possibilities that begin with the OID you feed to it.
My guess is that you need to stick a dot-zero (.0) at the end of the
OID
you're using. At least try that if you don't have access to a machine with
snmpwalk and snmpget.
Best regards,
James
Bhupesh Devgun wrote:
> Hi Brett
> I used Whatsup Gold MIb utilities .
> When I used the OID mentioned by Cisco web site ,I get the results hence
> that means OID used is correct.I got OID from MIBs from cisco.com.
> But when I specify the same OID in mrtg.cfg ,I get error message that
> invalid SNMP variable .
> I am wondering if it has any relation to SNMP version 2 or MIB2 ?
> How do we enable or disable SNMP2 or MIB 2 in mrtg.cfg ?
> Regards
> Bhupesh
>
> -----Original Message-----
> From: Brett Marler [mailto:[EMAIL PROTECTED]
> Sent: Friday, January 31, 2003 5:34 PM
> To: Bhupesh Devgun
> Cc: [EMAIL PROTECTED]
> Subject: Re: [mrtg] Re: Cisco 3660 router
>
>
>
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
