The link is very useful if you want to monitor the devices *through* the pix: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note 09186a0080094a13.shtml -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Leen Smit Sent: Thursday, February 06, 2003 11:06 AM To: [EMAIL PROTECTED] Subject: [mrtg] Fw: Getting info per host on PIX Hi There! I''ve been playing around with mrtg to get the bandwidth usage of our Cisco PIX. After several tries i managed to produce the total usage on the PIX for daily, weekly, yearly. However, i would like to have reports for several different hosts on the DMZ.. Is it possible to do this? If so, can some one give me some hints on how to do this? Ive been reading a lot of RTFM's, FAQ's and examples, but the truth is, that im a bit lost at this stage... Any help would be greatly appreciated! Leen Smit running mrtg 2.9.17-8 on RH8.0 - [EMAIL PROTECTED]/256mb -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
