Jaap, You can use '--ifdesc=name'. For other options type 'perl cfgmaker' without any parameters
Hth, Jan. -----Original Message----- From: Jaap Looijen [mailto:[EMAIL PROTECTED] Sent: Monday, February 10, 2003 3:59 PM To: [EMAIL PROTECTED] Subject: [mrtg] interface name I've read it before in the mailinglist , but i cannot find it ! I want to change the interface names of my switches, now they are displayed as 1 , 2 and so one. Not very much information! I want to give them the name of the connected network part. Is there an option for cfgmaker to specify different names for the interfaces ? Jaap -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
