Thanks for the help People, i already figured out what i needed to change...
I needed to have a fixed scale, and with just the AbsMax and MaxBytes (and Unscaled) i just coulndt get what i wanted... Below is how i finally got it right : Target[pix]: 1:[EMAIL PROTECTED]: SetEnv[pix]: MRTG_INT_IP="193.173.55.66" MRTG_INT_DESCR="PIX Firewall 'outside' interface" Unscaled[pix]: dwmy MaxBytes[pix]: 250000 MaxBytes1[pix]: 8000 XSize[pix]: 450 YSize[pix]: 300 Title[pix]: Totale Lineload op PIXfirewall ----- Original Message ----- From: "Leen Smit" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, February 11, 2003 1:07 PM Subject: [mrtg] Silly Question : how to get a 'default' value in the graphs > Hi There, > > ive been playing with the config files a bit, and there one thing that i cant seem to get to work. > We have a 2Mbit line here, but we are charged for anything over 128Mbit of bandwidth that we use. So what i'd like, is to have a line in the graphs reprisenting this value, so i can see when we are over our treshold. > Can any one tell me where/how to do this?? > > Leen Smit > > > > Leen Smit > > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
