Take a look at what I'm doing here:
http://redhook.univ-wea.com/MRTG/grendel.htm
MRTG runs on a windows box but the oids for cpu on a Red Hat box (with the
correct MIBS loaded, of course) are:
1.3.6.1.4.1.2021.10.1.5.1 1min
1.3.6.1.4.1.2021.10.1.5.2 5min
1.3.6.1.4.1.2021.10.1.5.3 10min
Here's the cfg part for the 1min graphs:
# Processor Utilization for Grendel
# divide by symbol alt + 0247
Target[grendel.cpu.1min]:
.1.3.6.1.4.1.2021.10.1.5.1&.1.3.6.1.4.1.2021.10.1.5.1:[EMAIL PROTECTED]
RouterUptime[grendel.cpu.1min]: [EMAIL PROTECTED]
MaxBytes[grendel.cpu.1min]: 10000
Title[grendel.cpu.1min]: Grendel cpu: Processor Load 1 Min
PageTop[grendel.cpu.1min]: <H1>Grendel CPU Utilization 1 Min x100</H1>
<TABLE>
<TR><TD>System:</TD><TD>Grendel</TD></TR>
<TR><TD>Maintainer:</TD><TD>Will Wagner</TD></TR>
<TR><TD>Processor Load
MIB:</TD><TD>.1.3.6.1.4.1.2021.10.1.5.1</TD></TR>
</TABLE>
ShortLegend[grendel.cpu.1min]: รท 100
YLegend[grendel.cpu.1min]: CPU Utilization
Legend1[grendel.cpu.1min]: CPU Utilization in % (Load)
Legend2[grendel.cpu.1min]:
Legend3[grendel.cpu.1min]:.
Legend4[grendel.cpu.1min]:.
LegendI[grendel.cpu.1min]: Load:
LegendO[grendel.cpu.1min]:
Options[grendel.cpu.1min]: gauge, integer
...just change the basic stuff....
Hope this helps out some folks.
-MannyO
-----Original Message-----
From: Tom Brown [mailto:[EMAIL PROTECTED]
Sent: Monday, February 10, 2003 7:15 AM
To: [EMAIL PROTECTED]
Subject: [mrtg] cpu load onRedHat 6.x and 7.x
Hi,
I've been setting up MRTG and all is well. However i can't seem to find any
examples of an mrtg.cnf to do with monitiring cpu load on a redhat box.
Would anyone please post a snip of their mrtg.cnf so i can look over it
please?
thanks
Tom
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
