Target[sispix01-mem]:1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.5 .1:[EMAIL PROTECTED] RouterUptime[sispix01-mem]: [EMAIL PROTECTED] MaxBytes[sispix01-mem]: 134217728 Options[sispix01-mem]: gauge, noo Title[sispix01-mem]: Memory PageTop[sispix01-mem]: <H1>Memory</H1>
Keith Johnson Lan Administrator Amcor Sunclipse North America 6600 Valley View Street, Buena Park, CA 90620 Voice: 714.562.6179 Fax: 714.562.2036 Email: [EMAIL PROTECTED] -----Original Message----- From: Bill Parker [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 25, 2003 9:13 AM To: [EMAIL PROTECTED] Subject: [mrtg] PIX-515E Connection Success I can report some success now, I have MRTG graphing current and maximum number of connections (5 minute polling). I solved the problem by going into the pix config, and doing: conf t no snmp-server community xxxxxx no snmp-server enable traps exit conf t snmp-server community xxxxxx snmp-server enable traps exit and MRTG started plotting values for connections. The CPU usage is still flat (0 and 0), but this could be due to the the PIX not being taxed...as i'm writing this, the connections were: Max Reading. 954.0 connections Average Reading. 940.0 connections Current Reading. 954.0 connections Max Since Reboot. 1881.0 connections Average Since Reboot. 1877.0 connections Current Since Reboot. 1881.0 connections Now, does someone have a definition for memory usage in a PIX which is already prebuilt? -Bill -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
