Thanks for your reply Patricia. Unfortunately, changing tag does not solve the problem because the value is still in b/s. I noticed on my other server that works fine, it automatically changed value and tag to Mb/s when it went over 1 Mb barrier.
Any other ideas? ----- Original Message ----- From: "Patricia A. Malinowski" <[EMAIL PROTECTED]> To: "George Myshlyayev" <[EMAIL PROTECTED]> Sent: Wednesday, February 26, 2003 7:08 AM Subject: Re: [mrtg] bits option issue > I think if you change the 'tag' under the graph with > ShortLegend[device]: Mb/s (or whatever you'd like to see) or you can use % > to show percentages - try it, let me know. > because the default is 'b/s' used for MAX, Average, and current. > ----- Original Message ----- > From: "George Myshlyayev" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, February 26, 2003 2:52 AM > Subject: [mrtg] bits option issue > > > > > > Hey guys, I'm using 'bits' option to display the traffic of my server. > > Everything looks fine except for the fact that it doesn't change values to > > megabits when it goes above 1 megabit barrier. It seems to be stuck at kb > > and I don't like that as I'd rather see values in megabits. On my other > > server using exactly same config, it works without a problem. Both > servers > > use mrtg version 2.9.10. Here's the Options[_] I use: > > > > Options[eth0]: nopercent,growright,bits > > > > Thanks in advance > > > > George > > > > -- > > Unsubscribe mailto:[EMAIL PROTECTED] > > Archive http://www.ee.ethz.ch/~slist/mrtg > > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
