Is it possible that OID is set to graph active channels of a T-1 (24) and you have a PRI connected, and it is thinking the D channel is possibly a modem in use and doesn't know that there are only 23 channels to use?
My initial thought, but anyone please add to it... Carl -----Original Message----- From: Mrtg [mailto:[EMAIL PROTECTED] Sent: Friday, March 07, 2003 4:56 PM To: [EMAIL PROTECTED] Subject: [mrtg] PM3 MRTG Graph incorrect Hi all, Quick question. Probably pretty dumb, but here goes.... I've got a few PM3's that I graph modem usage on.. I am using 1.3.6.1.2.1.2.1.0&1.3.6.1.2.1.2.1.0:[EMAIL PROTECTED]: for the OID. The graphs come out, but ALWAYS 1 higher than what is in use. I can actually graph a PM3 with no one on it, and it will show 1 modem in use. I believe I have delt with this before, but it has been quite awhile since I have graphed PM3's. Any ideas? Thanks, -Ronan Ronan Eckelberry Sr. Network/Systems Engineer WEBco Solutions, Inc (352)746-2500 www.webcosolutions.com -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
